Results 1 to 8 of 8
  1. #1
    Asterisk enthusiast abhasbajpai's Avatar
    Join Date
    Jun 2004
    Location
    Lucknow
    Posts
    251

    Default bootable cd from ISO Image

    hi all geeks out there
    i am facing a very piculeiar problem
    when i burn cd from the ISO images of linux supplied by digit DVD it dosent mk it bootable.
    i use nero n while burning i choose session closed and finilize disc
    then also it dosent mk it bootable.
    all other bootable disc boots
    my sys config is as followes
    Intel 865 GBV MB
    intel 2.4 prescott
    two HDD PATA 20Gb,80Gb
    (80 Gb, Samsung is primery master)
    (20 gb is secondery master)
    DVD Rom Samsung is secondery slave)
    CDRW samsung is primery slave
    Asus GeForce 5200 Gfx Card
    512 Mb RAM in dula channel 333Mhz DDRSDRAM

    i am usin nero 6 (which has came with my friends LG CDRW)
    Could any one tell me the step by step instruction how to make
    bootable CD's from ISO Images and what is the problem with my cdrw not makin them bootable.

    thank in advance

  2. #2
    In The Zone
    Join Date
    May 2004
    Location
    ** Hosur ** Operating System:GNU
    Posts
    451

    Default

    Start -> Programs -> Nero -> Nero 6 -> Nero Express

    Select " Disc Image or Saved Project "

    In the "File of Type"

    Select "Image Files (*.nrg, *.iso, *.cue) "

    Select the Image you need to burn

    Click "Open" button

    Then "NEXT"

    Nero will start burning the CD

    After that Reboot the sys.

    Make sure U boot from CDROM (Set in BIOS)



    Bye
    Million's Of Open Minds Can't Be Wrong!
    http://nc.xmgfree.com/weblog
    Everybody Wants to go to Heaven...But nobody wants to Die! :wink:

  3. #3
    Banned
    Join Date
    Oct 2004
    Location
    Bangalore
    Posts
    1,440

    Default

    ya remember to set your BIOS/CMOS to boot from CDs , this is important or else u will end up booting from your harddisk instead.

    Also ISO image that you are talking about could be corrupted, try using some other ISO file (bootable).

  4. #4
    Asterisk enthusiast abhasbajpai's Avatar
    Join Date
    Jun 2004
    Location
    Lucknow
    Posts
    251

    Default

    hi naveev
    i hv done the steps u hv provided
    the problem is it is nt selecting the .iso file ( its nt seeing them)
    olso .iso files r assoceted with nero but when i doble click on it nothing happens.
    the nero i ws using was oem verson with LG drive and mine is samsung so i revert back to nero 5.5 came with my drive but the problem is still there.
    i tried four iso images given in digit dvd.
    also i want to know that can i burn ISO image on cd RW.
    OFCOURSE i hv set boot form cd rom option from bios.
    i hv also cheaked the red-hat -8 linux cds and even with xp cd it is booting fine

  5. #5
    In The Zone
    Join Date
    May 2004
    Location
    ** Hosur ** Operating System:GNU
    Posts
    451

    Default

    @abhasbajpai
    Try using Nero 6
    Try using any other cdburners.......... other than Nero..

    You can use RW CD also to burn the iso images that is not at all a problem.

    Try

    Ultra ISO
    Magic ISO
    ISO Buster

    Also Visit
    http://members.home.nl/lsnoek/iso.htm

    ------------------------------------------------
    Naveen Chandran

  6. #6
    Asterisk enthusiast abhasbajpai's Avatar
    Join Date
    Jun 2004
    Location
    Lucknow
    Posts
    251

    Default

    r these softwares free
    i was using nero 6 earlier as it was oem for lg drive i got it from a friend
    i though may the the problem is with nero 6 (my drive is samsung) so i revert back ot nero 5.5. ( which came bundeled with my drive)
    but with both i am facing the same problem. other wise they r fine

    ******
    WHAT will the cd shows after burning ISO Image
    A SINGLE ISO FILE ?
    or many file lk its comes in linux distros cds which cms with books and other magzines.

  7. #7
    Human Spambot
    Join Date
    May 2004
    Location
    off to "never ever" land
    Posts
    2,912

    Default

    iso is the imsge file
    u arent writing the image file
    u writing FROM the image file
    so to answer ur question .. yeah ull see multiple files
    No Mercy, No Limits.
    Oobertech.net - Keeping Knowledge Free

  8. #8
    Banned
    Join Date
    Oct 2004
    Location
    Bangalore
    Posts
    1,440

    Default

    abhasbajpai can u tell the whole procedure in details that u use to burn this ISO to a CD-R or CDRW. How do u go about doing it , how u get the ISO file from DIGIT CDs to your harddisk first ( do u do this ) and how to use NERO BURNING ROM, complete with all the steps u use, then we can understand your problem. Its very difficult to understand your problem at this stage.

Similar Threads

  1. How to install OS from bootable iso image
    By CadCrazy in forum Open Source
    Replies: 3
    Last Post: 16-06-2008, 11:20 AM
  2. Boot a bootable iso image?
    By smartygoldenfish in forum Software Q&A
    Replies: 4
    Last Post: 14-11-2007, 09:28 PM
  3. How to create a bootable ghost image of xp
    By jayanbhm in forum Software Q&A
    Replies: 5
    Last Post: 23-10-2007, 11:53 AM
  4. How to add files to bootable iso image
    By CadCrazy in forum Software Q&A
    Replies: 13
    Last Post: 27-06-2007, 12:00 PM
  5. Bootable DVD from ISO Image
    By gg_3000 in forum Software Q&A
    Replies: 3
    Last Post: 12-12-2006, 02:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Close