No Display

[fawazz]

When i switch ON the main power, the system automatically starts. But there is no display and no beep. I tried changing the ram slots, cleared cmos settings. But it still does not work.
I use Pentium 4 1.7 GHz
512 RAM
80 GB HDD
845G motherboard

Waiting for reply

[Arsenal_Gunners]

Check the monitor connection.

[fawazz]

Originally Posted by vimal_mehrotra

Check the monitor connection.

Tried that one also.

[Arsenal_Gunners]

Do you have a gfx card,If yes tighten it.And Did the problem start after you did "something"

[fawazz]

Originally Posted by vimal_mehrotra

Do you have a gfx card,If yes tighten it.And Did the problem start after you did "something"

using onboard gfx.

[Arsenal_Gunners]

Did you do something(changed some setting in bios etc.) before this problem occurred.

[fawazz]

Originally Posted by vimal_mehrotra

Did you do something(changed some setting in bios etc.) before this problem occurred.

Just removed ram, checked it inserted it back. Thats all.

[Arsenal_Gunners]

^^After this the problem started?Hmm...If it is a ram problem there must be a beep.
Tighten all the power connectors on the motherboard,it looks like power problem.

[wizrulz]

Originally Posted by fawazz

Just removed ram, checked it inserted it back. Thats all.

then do that one more tiem and press the chips on those..did worked for me

[fawazz]

Ok my friend. I'll try that one also and will let you know. Thanx.

[wizrulz]

also remove ur cmos battery and place it agian....

[Arsenal_Gunners]

^^He has done that-"cleared cmos settings"

[nikhil ramteke]

try this...............

-first of all remove the connection of ur start and restart button on cpu,and again reconnetct them properly,now remove the cmos battery and jumper beside of that....

[Ace Ventura]

HI,

I had the same problem for 2 weeks and i could not figure out what went wrong

this happpened after enabling some settings in BIOS

so this was what was suggested and it worked

Hi codename_romeo ,


Thanks for the resolution.

Though I thought about removing the CMOS battery and putting it back i was not sure about doing it will resolved the issue

But after ur suggestion i removed the battery and also swapped the CMOS jumper and restarted the computer

It worked absolutely fine

Thanks a lot
Appreciate it

Cheers
Ace Ventura