No Display...

I am using the AMD athlo XP 2000 and mercury mother board and 512mb ram, i am trying to overclocking the processor from the BIOS options, i changed clock speed to 166MHz from the 133MHz.After save it & booting again the machine not yet to boot, monitor blinks again.How i will boot the machine.

[blade_runner]

You crazy or what !! You increased the FSB by 33Mhz in one go !!!!!!!!!!
Thats sheer foolishness ! You processor might get fried ...that is if the PC boots in the first place. Decrease the FSB to 133Mhz and then start up again. There is a sticky in hardware on overclocking AMD processors, plz refer to that.

[mariner]

yo man ! treat ur pc like ur GF. nice,easy n slowly.

[Nemesis]

good analogy mariner.....
overclocking is not an easy job bro...
im surprised ur processor or mobo hasnt fried....

[NikhilVerma]

Take out ur mobo's battery then wait and put it in again, it will reset your bios settings again
And probably your pc will work alright

[aadipa]

reset ur BIOS to default by using Jumper or remove battery and wait till 5 to 30 minutes depending on ur mobo, let the BIOS set to defaults ie 100MHz, then boot and set it to 133MHz