Kindly help regarding DVD Burner Firmware Flash gone wrong

[shivaranjan.b]

I have a lite On dvd burner. Its model No: SOHW-1633s

Some times when i burn i get a session fixation error and nero says it cannot do disc at once.

I use nero 6.3

Please see the Log file i have pasted.


LOG FILE



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 2:49:52 PM
Nero version: 6.3.0.0
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0K - HA 3 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0K - HA 3 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV1204H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 494MB (506604kB)
Free physical memory: 270MB (277268kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.11.2004
ISO compilation
8:43:23 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:43:23 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

8:43:23 PM #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

8:43:23 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

8:43:23 PM #5 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

8:43:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2293359 (509:38.09)

8:43:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

8:43:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

8:43:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:43:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2293360 (2293360) = #2293360/509:38.10
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293360 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

8:43:24 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4696801280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2293360 | lead-out | 1 | 0x00 | 0x41

8:43:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

8:43:24 PM #13 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

8:43:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

8:43:24 PM #15 Phase 32 File dlgbrnst.cpp, Line 1800
Simulation started at 4x (5,520 KB/s)

8:43:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:43:24 PM #17 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:12,890 (852890ms) -> OK

8:43:24 PM #18 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

8:43:24 PM #19 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON , SMART-BURN : ON

8:43:24 PM #20 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

8:43:24 PM #21 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:43:26 PM #22 Text 0 File Cdrdrv.cpp, Line 1276
20:43:26.656 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later

9:00:12 PM #23 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2293360 (22FE70h), lenght 0 blocks

9:00:12 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:00:12 PM #25 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 2293359

9:00:36 PM #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:00:36 PM #27 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:00:41 PM #28 Phase 33 File dlgbrnst.cpp, Line 1800
Simulation completed successfully at 4x (5,520 KB/s)

9:00:43 PM #29 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

9:00:43 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:00:43 PM #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:12,890 (852890ms) -> OK

9:00:43 PM #32 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

9:00:43 PM #33 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON , SMART-BURN : ON

9:00:43 PM #34 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

9:00:43 PM #35 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:01:22 PM #36 Text 0 File Cdrdrv.cpp, Line 1276
21:01:22.156 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later

9:15:39 PM #37 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2293360 (22FE70h), lenght 0 blocks

9:15:39 PM #38 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:15:39 PM #39 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 2293359

9:17:13 PM #40 SCSI -1176 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

9:17:13 PM #41 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:17:13 PM #42 CDR -1176 File ThreadedTransferInterface.cpp, Line 1659
Session fixation error

9:17:13 PM #43 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659
Could not perform end of Disc-at-once

9:17:13 PM #44 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was -1

9:17:13 PM #45 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:17:13 PM #46 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:17:13 PM #47 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:32:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1164 (xpsp2.021217-1051), size=87040 bytes, created 1/31/2003 3:43:30 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Edited Batty] For making relevant the subject

[ishaan]

try using some other software like roxio also

if its fine then it was a software prob

or else mebe hardware prob or mebe drivers not installed properly

[vysakh]

are u trying to copy a cd/dvd
may be copy protection

[archzillanx]

hey bud ,
i think the danger is with your drive.becoz some time ago my drive SONY also gave me the same problem .i gave it for servicing as i didn't wanna play with it and everything is fine now.

[theraven]

Originally Posted by vysakh

are u trying to copy a cd/dvd
may be copy protection

aahhh vysakh we meet again
if the disc was copy protected it would read for a very long time .. and give read errors at every track/minute.... which would show up in the log
hes gettin a session error .. and a disc@once error

@shivaranjan
what dvd are u trying to write ?
any problem i can think off that could cause this error doesnt exist in ur log file
ur dma is turned off ... so is ur multisession etc .
so i finally did a search on google ... everything points to only one thing ... a faulty dvdrw drive
even tho it was workin fine 2 days back
what u can do while i rack my brains a lil more is that ... take the drive to a friends pc and check if it works there

also i see ur using a princo DVDrw ...
u can try using another companies DVDrw ... maybe samsung ... cuz sometimes media does have a problem with the writer ... or rather vice versa

if uve successfully written on nero before ... ignore the above

also try using another burnin software. .. for some ppl this has worked ..
if it doesnt work well with any software ... like i said it could be the media or the drive
if it works with other software .. then theres this known problem in nero due to something
anyways it'll be fixed in version 6.6.0.2 and 6.3.1.27C !!!

one MORE thing u can try is CREATE a multisession disc. .. and then CLOSE it ...see if that works !!

[Kannan]

archzillanx is right

even the Benq writer in my office faced the same problem and still coughing

[perk_bud]

yeah u r right the disk is copy protected

[xenkatesh]

Copy proteced CD/DVDs give the problem.....

[IG]

also tryusing a older version of nero

[theraven]

??WHAT IS WRONG WITH U GUYS ?
copy protection cd's give READ errors man !!
fixation errors are HARDWARE problems !!

[Kannan]

Yeah theraven is correct and I am keep on saying the same.

It's Hardware problem.

Please check the Drive with a hardware engineer.

[archzillanx]

ha ha ha ,
My solution was correct.