My PC Case modding......

[john_the_ultimate]

Hello............good to be back at the forum after a week.

Now coming to the point.............
I was looking for a "good looking" cabinet, but was not able to find anything of my choice. Actually selected a few but unfortunately they are not available in India.
So thought of modding my existing cabby. Now u people comment on my effort...and one more thing sorry for the picture quality....clicked by cellphone camera.

This is how my chassis looked like:





What I did was first stripped the case to its "bone", then drilled holes, cut metal for the transparent side panel, took out the existing color (using sand paper) etc.
After all cutting,drilling and sanding..........coated the metal and plastic parts with primer and then hand painted each and every inch u are seeing.

O.K. now let me shut up and show some photos of my one weeks works.

WORK IN PROGRESS


PSU SLEEVING......or whatever u like to say.

[john_the_ultimate]

Continuing................
ROUNDING IDE CABLE


COLORING FANS......don't now how it helps but certainly looks cool.


Now finally it is complete..

FRONT VIEW


SIDE VIEW

[john_the_ultimate]

TOP VIEW


BACK VIEW


LET THERE BE LIGHT.




One more thing......I had a spare PSU so just modified the cabby to accomodate two SMPS's.

Well that's it and thanks u.

[go_gamez]

hey man loooks really kewl...can u plzz tell me how did u abt with the transperent thing ??
i have a simple i -box cabinet and want to make the side panel transperent..so how do i do it ?
did u just cut out some part of the side pannel and fixed it with some transperent material ? how much did it cost u ?(only trasperent pannel thing )...and what is the material used in the trasperent side pannel ?

[john_the_ultimate]

Just cut the side panel in the required size (take it to any local shop which does it or if u have a dremel/rotomatic u can do it urself....but use protective gear), then buy plexiglass.....fibre glass (try to keep away from the normal glass).
Now drill holes for the nuts & bolts in the glass(yes u can do it urself if u r using the above mentioned glass, just be careful) and the metal side panel.
Cover the cut portion (metal) with rubber gasket (tubing) available at local car repair shop. about the cost the glass cost me Rs.150 for 13*14 inch piece (2mm) and rest screws,fevikwik (for the rubber)......maybe total cost around Rs. 200-220.

[dOm1naTOr]

Really nice ..gud finishing..
what is the u use around the arylic panel [dat black lining?].
Also how did u paint the fan only in balde. The blade nd the fan body are too close or is it a standard coloured fan?
Also what kinda paint did u use. is ir ordinary or spray paint?
Did u buy any sleeving kit? or is it something elso u ise for sleeving?
Also I think painting the whole cab including back reduces heat decipation as simple alluminium body decipates more without any coating..or u dun care bout heat?
Anyway very nice wook man

[Rollercoaster]

amazing...

I want to do my pc mod so bad.. but i cant find a dremel here in dehradun

[go_gamez]

^^now whats a dremel and a sleeving kit ??

[john_the_ultimate]

@arvind_n20

That's rubber gasket/tubing......the thing u find around the glass in cars.
All the stuff r hand painted.....used the oil paint available in the market and applied with brush......no spray paint (tried to look for aerosol/ canned spray paint but no luck).
The sleeving thingy is called "loom" and can be found at any electrical shop, its made of plastic. And no sleeving kit here.
As for heating issue........my o'c venice (1.8GHz to 2.7GHz) still idles around 38C and loads at 51C. Just try to keep good air circulation and u will not face any problem.

@go_gamez
DREMEL is a tool which comes with many attachments for drilling, cutting,grinding etc. See this : http://en.wikipedia.org/wiki/Dremel
U can buy similar tool in India by the name ROTO-MATIC.
For more details on roto-matic http://www.telebrandsindia.com/Teleb...0Rotomatic.asp

[caleb]

Excellent work John the ultimate,

Looking at your amazing modifcation I'm tempted to mess with my chassis...very impressed with your simple solution for sleeving the cables...impressive. One question though:

How did you get the top modification done? pls reply with details. Thanks in advance.

[abhijit_reddevil]

Great work John, and I was wondering where you were all this while.... So you were busy with this. Now I do not think you will regret getting that Gigabyte chassis.

[hmmmmmmmmmmmmm]

u can get this cabinet in Hyd for jus 2K ...lol...wit DISPLAY too...

[dOm1naTOr]

How did ya make the coloured fan???or what did it cost?
__________
It would be more nice if such mods are done in cabs like Zebronics Antibiotic.

[john_the_ultimate]

@caleb
The top portion is simple paint job and blowhole to accomodate a 120mm fan.

@digitized
Thanks....buddy.

@hmmmmmmmmmmmmmmmmmm
Ya can surely get many cabby with transparent side panel.....but that's the easy way and u don't get it customized to ur needs. This is an IBALL GRABIT full tower case which I have modified.

@arvind_n20
Just color the blade with oil paint using a brush. To get better color first coat the blades with white plastic primer or white paint.

[samrulez]

@go_gamez: U can get a acrylic sheet for 60 bucks......


@john.....awesome work.....how did u get such a smooth finish on the plastic body after painting?

[hmmmmmmmmmmmmm]

Hey can u make same cabinet for me....wht u say ???

[abhijit_reddevil]

Originally Posted by hmmmmmmmmmmmmm

Hey can u make same cabinet for me....wht u say ???

Nothing comes free, will be chargeable I think.... What does John have to say to this? .

By the way, just to inform you people, I know John personally and have been following his case modding plans for quite a while...

[john_the_ultimate]

@sam
Well now it seems that those 6 years training in fine arts does come handy..........what do u say? By the way just try to apply thin coats for better result, usually thick coat of color takes longer to dry and doesn't give the smooth finish.

@hmmmmmmmmmmmmmmmmmm
Well it depends.......... and most importantly where do u stay? Since I am in Kolkata so if u r from here then something could be done. Next question is what r ur requirments etc. But must say thanks to u for appreciating my work. And as digitized mentioned cost thingy........I think, it can come later into consideration.
But even if r not from my place then also we cud discuss so that u cud do the mod urself. What d'ya say?

[samrulez]

Originally Posted by john_the_ultimate

@sam
Well now it seems that those 6 years training in fine arts does come handy..........what do u say? By the way just try to apply thin coats for better result, usually thick coat of color takes longer to dry and doesn't give the smooth finish.

6yrs!!!....wow......I had fine arts from 5th std to the 8std (now i'm in 9th).......I used to always get ''C'' in all terms .... ........so I know how tough fine arts is!

[Rollercoaster]

@hmm:
these thing are hobbies and not services..
how odd u even asked.. modding is a hobby that can on be enjoyed but doing it yourself.

@john: nice stuff man. hey how much did u buy that dremil for? the link u posted says 2000 bucks? in the real market do u know costs and company?
really appriciate man!!

[john_the_ultimate]

No man, no idea what it costs in the local market..............The DREMEL was gifted to me by my friend and it was bought in USA, so u can guess.

One more thing u can do is buy a drill machine and get cutting attachments/bits/wheel for it, it will work the same.

The crude way doing is get a hammer and cutting chissel/cheni and no I am not joking........it can be done this way.

Or the easiest way is to take it to a welding/cutting shop and get it done there.

But most important thing, do wear protective gears, if u r planning to do it urself.

[Rollercoaster]

well yes i know u r not jokin with the cheni-hathoda combo, that is been my method till now

but it is too crude and inaccurate.. i think i will do more research and buy one... i have been wanting it a long time now. btw 2000 seems a nice price..

and people say that attachments are real good quality...

[john_the_ultimate]

Do post some pics.......and what r ur plans of modding/what have u planned to do.......since u have a better knowledge of LED lighting and circuits. Ur mod wud be awesome. Good luck.

[coolpepe]

hello guys, i am also modifying my cabinet and soon post the pics of it. As for cutting the side panel was a painful job, so i have decided to buy a jig saw. I used both drill and rotomatic but both are not capable to do the job. As for chinni hatoda the edges are very uneven. Can someone please help me on the led and lightining part. THANX in advance.

[n2casey]

@ john_the_ultimate

Nice work friend.
I have also done such work for my friendbut I never tried for me coz I think it's just wasting of time.
Well, don't go on my view, just keep it up.

[pra_2006]

wow man really good work i have this cabinet but not modded anyone from delhi can do this pls reply me

[john_the_ultimate]

@ n2casey
For some it's waste of time and for some its hobby. As for me, just wanted to find out if I cud do it or not.

@pra_2006
thanks.

[n2casey]

@ john_the_ultimate

I m not trying to demoralize U. I m just telling my view (coz I spent all my time in programming). Sorry but don't take it seriously. U have done a nice art work.

[coolpepe]

helloooooo guys can someone help me on lighting part of the cabinet as i dont have any knowledge on this part.

[samrulez]

^^
Sure what do u want to know??