Browsing net via FC4

[startmenu]

Undetered by the problems I faced to configure my internet connections in KUBUNTU
I installed FC4 to learn linux and here i am with the problem of net accessing in FC4 . I use broadband internet connection, the modem provided by my service provider is " Terayon eMTA DOCSIS Modem " and i use USB connector in Windows XP . Though ethetnet connector
is also provided I am unsure of my NIC card presence. I hope I am clear about the problem. Any help from tux gurus are welcome.

[digen]

If you are using the USB version of the modem then for it to work in GNU/linux you need to find its Linux drivers first.Now if you ask me I would rather install a ethernet card if it isnt present & connect your FC4 to the internet with ease.

But hey thats just my opinion,if you would like to take the other route then wait for the linux gurus to post.

You've said you are un-aware by the ethernet card's presence,can you tell me which motherboard you got there?

[mehulved]

Have look here www.cables.org.il/linux/CableUSBLinuxEn.pdf. See if this helps. I don't know about your knowledge of networking and computers but hope you will be able to get on with this guide and it will solve your problems. It can very well apply with Kubuntu if you're still using it.

[mehulved]

As digen said and that PDF says, buying an ethernet card is the best option. It will cost you about Rs. 400 approx., if I remember right. It will save you a lot of headache. Anyways, if you want to go ahead with your present setup you can try out the pdf I've posted in the previous post and see if it works. Maybe I can try that out later with my modem and see if it works.

[startmenu]

Surely , I have ASUS motherboard ( Intel 865 chipset ) along with Intel P4.

[digen]

If its a fairly recent motherboard then most often than not it will have atleast one ethernet controller onboard.

Check the back side of your cabinet,it looks like the normal port which the usual PSTN telephones have albeit large in size.Registered Jack 45 (RJ45) to be precise.

Here is a picture of how it looks : http://ncsudesign.org/content/images...jack/plug2.gif

[desertwind]

Originally Posted by startmenu

Surely , I have ASUS motherboard ( Intel 865 chipset ) along with Intel P4.

That doesn't help. You should've quoted the exact model.

Or you can check it yourself. Try to find a socket like the one in right (RJ-45). The socket Left is a telephone socket(RJ-11), don't confuse it with RJ-45.

[startmenu]

Hey guys , I am writing this post in Fire Fox , configured my modem in "system Settings -> Network Configuration" and presently using USB cable to connect the modem . And yes I have ethernet port .
It was said that it will be difficult to configure USB system than a ethernet system , but I only copied IP address , Subnet Mask and Default Gateway address in the proper location and Voila !! Though I am not complaining but surprised . Thank you all for your inputs. FC4 is gonna rock for me.

[mehulved]

Hmm that's great. This would have been possible in Kubuntu too if someone woild have managed to find where the networking option is located. Do have a great time with FC.
Also, I'd suggest you to get yum or apt for package management. it makes life eaiser.
Do some google searches for them and install whichever you like.

[mehulved]

Your post prompted me to try out using my cable modem from USB. After trying for 1/2 hour atlast I got it to work. Right now my modem is connected via USB and its working fine. It was great fun trying out and learning something new.

[startmenu]

Wow , it was amazing to know that u used d method , it is always nice to see that your
seniors learn a thing or two from you

[mehulved]

Everyone has something to teach each other be it seniors, juniors or peers. It is always good to learn from other's experience what you've missed out.

[QwertyManiac]

Hell it isnt working for me I tried copying all I had into Ubuntu but still it refuses to connect, the modem is linked and ready but the OS refuses connecting

[mediator]

Hmmmm.I'll try it toooo! I had given up hope on Knoppix......but seeing ur success revived my determination again to do so.
Just ip,subnet etc na? Or anything else u did?

[mehulved]

I don't really remember the exact steps but I followed that pdf and googled for the drivers. I do remember being able to find the drviers for my modem in Mandriva. But, it wasn't auto detected. I had to manually select it. I don't really have time for now to try it out and give you the exact steps but if you look around for a bit you may find it. If you are able to successful then you can write a tutorial on it.
Best of luck.

[vignesh]

Why don`t you try systemsettings command.It will open a control center and in that choose networking and manually enter the ip addrs.. It should work.

[mediator]

@startmenu........Bro can u please explain every step u did? PLease!
I have DSL Router and wanna connect via USB!

[mehulved]

I don't really think he's around anymore. He hasn't been active for a long time.

[~Phenom~]

hey guys , I have FC5 and dataone connection with USB modem smartax mt882.
how should i proceed to get internet working in FC5????

[mehulved]

Well read thru the thread and try it out. If you get it working that will be great.
__________
OK just try this out http://www.linuxforums.org/forum/lin...onnection.html.
Or just connect via USB and check the first line of

dmesg | tail

Above should be typed in the terminal.
See if anything is detected. If it is maybe we can proceed further.
__________
Also try this http://www.linuxquestions.org/questi...d.php?t=455721

[~Phenom~]

i typed this in terminal
dmesg | tail

and got this:


[root@localhost ~]# dmesg | tail
[drm] Initialized i915 1.4.0 20060119 on minor 0
audit(1159032030.129:2): avc: granted { execstack } for pid=2250 comm="metaci ty" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unc onfined_t:s0-s0:c0.c255 tclass=process
audit(1159032030.129:3): avc: granted { execmem } for pid=2250 comm="metacity " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159032031.705:4): avc: granted { execstack } for pid=2258 comm="nautil us" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unc onfined_t:s0-s0:c0.c255 tclass=process
audit(1159032031.705:5): avc: granted { execmem } for pid=2258 comm="nautilus " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159032031.705:6): avc: granted { execmem } for pid=2258 comm="nautilus " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159032031.781:7): avc: denied { use } for pid=2286 comm="bluez-pin" na me="[7819]" dev=pipefs ino=7819 scontext=root:system_r:bluetooth_helper_t:s0-s0: c0.c255 tcontext=system_u:system_rdm_t:s0-s0:c0.c255 tclass=fd
audit(1159032031.781:8): avc: denied { use } for pid=2286 comm="bluez-pin" na me="[7819]" dev=pipefs ino=7819 scontext=root:system_r:bluetooth_helper_t:s0-s0: c0.c255 tcontext=system_u:system_rdm_t:s0-s0:c0.c255 tclass=fd
audit(1159032033.957:9): avc: granted { execmem } for pid=2258 comm="nautilus " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159032033.957:10): avc: granted { execmem } for pid=2258 comm="nautilu s" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unco nfined_t:s0-s0:c0.c255 tclass=process
[root@localhost ~]#










whats next????

[mehulved]

Oops sorry forgot to mention. Remove it and then connect. Just after connecting post the output of dmesg | tail.

[~Phenom~]

done as u said , here is what i got:


[root@localhost ~]# dmesg | tail
audit(1159033095.616:6): avc: granted { execmem } for pid=2218 comm="nautilus " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159033095.724:7): avc: denied { use } for pid=2235 comm="bluez-pin" na me="[7657]" dev=pipefs ino=7657 scontext=root:system_r:bluetooth_helper_t:s0-s0: c0.c255 tcontext=system_u:system_rdm_t:s0-s0:c0.c255 tclass=fd
audit(1159033095.724:8): avc: denied { use } for pid=2235 comm="bluez-pin" na me="[7657]" dev=pipefs ino=7657 scontext=root:system_r:bluetooth_helper_t:s0-s0: c0.c255 tcontext=system_u:system_rdm_t:s0-s0:c0.c255 tclass=fd
audit(1159033097.104:9): avc: granted { execmem } for pid=2218 comm="nautilus " scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:uncon fined_t:s0-s0:c0.c255 tclass=process
audit(1159033097.104:10): avc: granted { execmem } for pid=2218 comm="nautilu s" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unco nfined_t:s0-s0:c0.c255 tclass=process
audit(1159033097.624:11): avc: granted { execmem } for pid=2218 comm="nautilu s" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unco nfined_t:s0-s0:c0.c255 tclass=process
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #2 chosen from 2 choices
eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, 00:0f:a3: 8e:10:72
usbcore: registered new driver cdc_ether
[root@localhost ~]#




whats next????

[mehulved]

Good. It's being detected. See below

usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #2 chosen from 2 choices
eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, 00:0f:a3: 8e:10:72
usbcore: registered new driver cdc_ether

Now let me see if I can find more info. Googling so far, suggests that it is possible with mt880 not with 882. Still I will search for more and see if it's possible to get something.
@Mediator or qwerty if you'll are using this modem can you'll compile a new kernel with CDCEther enabled. And then check if it works via USB.

[~Phenom~]

I m waiting for ur reply...

[mediator]

@tech_your_future...........I guess ur the only mod who keeps on helping actively!
Neways I also googled a lot, issue some commands "dmesg | tail","lsusb"! The output od "dmesg | tail" is like u quoted but without "cdc_ether". From the "lsusb" I found that my D-Link modem was being detected!

Neways from another forums someone said that all u have to do is point the network adapter to the USB modem. But he didnt say anything else. These are the only clues I have gathered so far.

Lets see. This has become a challenging problem. My exams are over so I'll look into this thoroughly now! U two try ur best and lets hope to crack this!

Neways I tried this on Knoppix 4.0.2 so far on mah lappy. I think I'll be upgrading to 5.0.1 now. If it doesnt works still then at last I'll try on mah main OS -> FC5!
So best of luck to u too and keep this thread updated for all the latest discoveries!

[praka123]

For u ppl,in debian and ubuntu,there is ``modconf`` tool which allows u too probe modules by viewing all those avialble in current kernel.

[~Phenom~]

Hurray ,Finally I m connected to internet in linux FC5.
I used lan card for this.
I just noticed in windows that I was having a lan card on board intel 845GVSR. When earlier I asked people here that I have intel 845GVSR , does it have onboard lan card, everybody said no.
But I noticed it in windows tray.
So just bought the wire and used adsl-setup and net is running fine.

Mp3 also playing now , just installed xmms.