Configuring Bsnl Dataone Broadband in Linux

View Poll Results: In which os are you using bsnl dataone broadband broadband

Voters
13. You may not vote on this poll
  • Windows XP

    6 46.15%
  • Macintosh

    0 0%
  • Linux

    7 53.85%
Results 1 to 2 of 2

Thread: Configuring Bsnl Dataone Broadband in Linux

  1. #1
    The Linux Man ! paragkalra's Avatar
    Join Date
    Jan 2006
    Location
    Nagpur, Maharashtra, India
    Posts
    217

    Default Configuring Bsnl Dataone Broadband in Linux

    CONFIGURING BSNL DATAONE BROADBAND IN REDHAT AND FEDORA VIA LAN-CARD

    I think BSNL people and HUAWEI (modem manufacturing company for BSNL) deserve a pat on their back for giving ample support for their broadband connection and modem drivers for all operating systems. Modem comes with a CD which contains drivers for Windows, Linux as well as for Mac Machines. You will need these drivers in case you want to connect Internet via USB. In case you want to connect Internet via Lan-Card then you don't need to do any thing. Just follow the steps prescribed bellow and wallah!!!!!! you are online on Linux. Lan-Cards are detected 9 out of 10 times in Linux. In case you want to check whether your lan-card is detected or not go to Applications --> System Settings --> Network. Then a window would pop up. In that window click the HARDWARE tab and check the status of Ethernet. The status should be OK. This documentation is for Redhat Enterprise Linux 4, Rehat Linux 9 and Fedora core 4 Underlined instructions in BOLD, ITALICS and curly BRACKET are comments. Its for your help and understanding. Don't type them in terminal.


    {First thing you need to do is that open the terminal and in terminal type}
    [root@localhost ~]# adsl-status

    {You must see the following message.}
    /sbin/adsl-status: Cannot read configuration file '/etc/ppp/pppoe.conf'

    {Then type following command.}[root@localhost ~]# adsl-setup

    {You will see something like this.}

    Welcome to the ADSL client setup. First, I will run some checks on
    your system to make sure the PPPoE client is installed properly...


    LOGIN NAME

    {Enter your login /user name provided by BSNL. I did something like this.}

    Enter your Login Name (default root): pollengrain

    INTERFACE

    {We generally have one lan-card. So just press enter key. In case you have multiple lan-cards then you type eth0 or eth1 or eth2 so on and so forth as may be the case}

    Enter the Ethernet interface connected to the ADSL modem
    For Solaris, this is likely to be something like /dev/hme0.
    For Linux, it will be ethX, where 'X' is a number.
    (default eth0):

    {Just press enter key for the following event as well.}

    Do you want the link to come up on demand, or stay up continuously?
    If you want it to come up on demand, enter the idle time in seconds
    after which the link should be dropped. If you want the link to
    stay up permanently, enter 'no' (two letters, lower-case.)
    NOTE: Demand-activated links do not interact well with dynamic IP
    addresses. You may have some problems with demand-activated links.
    Enter the demand value (default no):

    DNS

    {In this case you need to give the IP address of the DNS server to which your machine should connect. I entered primary DNS as 61.1.96.69 and secondary DNS as 61.1.96.71 as shown below. You cannot use any IP address. You need to use these only.}
    Please enter the IP address of your ISP's primary DNS server.
    If your ISP claims that 'the server will provide dynamic DNS addresses',
    enter 'server' (all lower-case) here.
    If you just press enter, I will assume you know what you are
    doing and not modify your DNS setup.
    Enter the DNS information here: 61.1.96.69
    Please enter the IP address of your ISP's secondary DNS server.
    If you just press enter, I will assume there is only one DNS server.
    Enter the secondary DNS server address here: 61.1.96.71

    {Now it will ask you to enter you password. Remember while typing password it won't show you any thing, just don't panic, It is accepting your password.}
    PASSWORD

    Please enter your Password:
    Please re-enter your Password:

    USERCTRL

    {It means whether you want to give the permission to local user apart from root user to access broadband. I allowed the local user by just typing yes.}
    Please enter 'yes' (two letters, lower-case.) if you want to allow
    normal user to start or stop DSL connection (default yes): yes

    FIREWALLING

    {Enabling firewall sometimes may be quite troublesome. So its just better to disable it by typing 0 as shown bellow.}

    Please choose the firewall rules to use. Note that these rules are
    very basic. You are strongly encouraged to use a more sophisticated
    firewall setup; however, these will provide basic security. If you
    are running any servers on your machine, you must choose 'NONE' and
    set up firewalling yourself. Otherwise, the firewall rules will deny
    access to all standard servers like Web, e-mail, ftp, etc. If you
    are using SSH, the rules will block outgoing SSH connections which
    allocate a privileged source port.

    The firewall choices are:
    0 - NONE: This script will not set any firewall rules. You are responsible
    for ensuring the security of your machine. You are STRONGLY
    recommended to use some kind of firewall rules.
    1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
    2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
    for a LAN
    Choose a type of firewall (0-2): 0

    Start this connection at boot time

    {Now it will ask you whether you want to connect to Internet during booting. Allow it to avoid pain in your neck.}

    Do you want to start this connection at boot time?
    Please enter no or yes (default no):yes

    {It will now present you a summary of your entries. Check it and accept the changes by just typing y.}

    ** Summary of what you entered **

    Ethernet Interface: eth0
    User name: pollengrain
    Activate-on-demand: No
    Primary DNS: 61.1.96.69
    Secondary DNS: 61.1.96.71
    Firewalling: NONE
    User Control: yes
    Accept these settings and adjust configuration files (y/n)? y
    Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
    Adjusting /etc/resolv.conf
    Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
    (But first backing it up to /etc/ppp/chap-secrets.bak)
    (But first backing it up to /etc/ppp/pap-secrets.bak)



    Congratulations, it should be all set up!

    Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
    to bring it down.
    Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
    to see the link status.

    {Now check the status by using following command.}[root@localhost ~]# adsl-status

    {It will show you following message.}

    adsl-status: Link is down (can't read pppoe PID file /var/run/pppoe-adsl.pid.pppoe)

    {Now you need to connect to your BSNL server. Execute following command in terminal. If everything goes well you won't see any message or error.}

    [root@localhost ~]# adsl-start

    {Now again check the status and make out the difference}

    [root@localhost ~]# adsl-status

    adsl-status: Link is up and running on interface ppp0
    ppp0 Link encapoint-to-Point Protocol
    inet addr:59.95.67.165 P-t-P:59.95.64.1 Mask:255.255.255.255
    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
    RX packets:5 errors:0 dropped:0 overruns:0 frame:0
    TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:126 (126.0 b) TX bytes:182 (182.0 b)

    {You will notice that your machine has been provided a dynamic IP. Next time when you would login this IP would be different one. This IP may also change automatically after some time during same login as well. Now check the connectivity using ping command. If you see something like show bellow then your connection has been successful. Press control key and c key simultaneously to come out.

    [root@localhost ~]# ping www.google.com
    PING www.l.google.com (66.102.7.104) 56(84) bytes of data.
    64 bytes from 66.102.7.104: icmp_seq=0 ttl=252 time=321 ms
    64 bytes from 66.102.7.104: icmp_seq=1 ttl=252 time=333 ms
    64 bytes from 66.102.7.104: icmp_seq=2 ttl=252 time=332 ms
    64 bytes from 66.102.7.104: icmp_seq=3 ttl=252 time=330 ms
    64 bytes from 66.102.7.104: icmp_seq=4 ttl=252 time=331 ms
    64 bytes from 66.102.7.104: icmp_seq=5 ttl=252 time=330 ms
    64 bytes from 66.102.7.104: icmp_seq=6 ttl=252 time=331 ms
    64 bytes from 66.102.7.104: icmp_seq=7 ttl=252 time=330 ms
    64 bytes from 66.102.7.104: icmp_seq=8 ttl=252 time=331 ms
    64 bytes from 66.102.7.104: icmp_seq=9 ttl=252 time=332 ms
    64 bytes from 66.102.7.104: icmp_seq=10 ttl=252 time=333 ms

    --- www.l.google.com ping statistics ---
    11 packets transmitted, 11 received, 0% packet loss, time 9998ms
    rtt min/avg/max/mdev = 321.612/330.776/333.217/3.089 ms, pipe 2
    [root@localhost ~]#

    {Go to your web browser and surf the net. Enjoy!}

    {To disconnect from Internet use this.}

    [root@localhost ~]#adsl-stop
    Popular Gadget Deals
    Parag.A.Kalra, The Linux Man
    http://www.paragkalra.com/
    In this world without WALLS and GATES who need WINDOWS! USE LINUX! STOP PIRACY! GO OPEN SOURCE!

  2. #2
    Burning Bright anantkhaitan's Avatar
    Join Date
    May 2006
    Location
    NIT, Bhopal
    Posts
    266

    Talking Re: Configuring Bsnl Dataone Broadband in Linux

    Configuring BB in Fedora/Redhat is easiest Job:

    1> system-config-network
    System>Admistration>Network

    2>Click New>xDSL Connection

    3>Fill the box with appopiate information i.e.
    Provider Name -> of ur choice
    Username & Password

    Thats it, point ur provider and click on Activate.
    ..::Fedora ::.. Freedom + Infinity + Speech
    Registered Linux User #447318

    GNUger was here.... Grrr....

    Maah! Blog
    http://brightedges.blogspot.com/


Similar Threads

  1. Replies: 3
    Last Post: 16-04-2012, 08:06 PM
  2. Replies: 1
    Last Post: 07-10-2006, 05:21 AM
  3. Configuring BSNL dataone Broadband in SOLARIS 10.
    By paragkalra in forum Open Source
    Replies: 1
    Last Post: 30-08-2006, 11:41 AM
  4. Replies: 2
    Last Post: 07-08-2006, 09:10 PM
  5. configuring bsnl broadband in linux
    By paragkalra in forum Tutorials
    Replies: 2
    Last Post: 06-01-2006, 07:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Close