My system was unable to boot on my first try

[nanda]

I am new for this forum:

And i thank to all the members and administrators for helping by this site.

My config is:

Q6600
Biostar tp35 - A2d7
2 x 1 Gb Trans 800 Mhz
320 gb WD SATA II
CM 500w
Xfx 8600GT 512 (DDR2)
Viewsonic VX2255WMH
Antec Tx1150 Cabinet

I have a problem from last month, that my system was unable to boot on my first try.(AND THE LEDS IN MY MOBO WAS NOT LIGHTING).......

After many restarts, then the mobo LED'S (1 for memory test & another for VGA test) blinks and my system is start to BOOT.

In sometimes, it boots on first try and then hangs while loading the WINXP LOGO Screen.

What's the problem, if any users faced like this problem please share with me.?

PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!

[k_blues24]

Check those ram modules and clean edges. If ur mobo is under warrenty ask them 2 check every component chip
Write again 2 us

[nanda]

I done it already, but no use.

Any other Suggestions.