Problem with XFX 650i Ultra

jackal_79 · 24-10-2007, 07:10 PM

After seeing a lot of posts suggesting XFX 650i Ultra i bought the mobo.From day one iam facing issues.First it was shutting down suddenly without any warnings while system was working or sometime during the bootup .When restarting i will get a screen saying system is in safe mode, please reset your CPU frequency in the CMOS setup.But again it will shut down before i could do any thing.I tried with a different PSU and RAM with same result.I took the mobo to Rashi Peripherals from where i bought it.They did a BIOS update after which the mobo seemed to be some what stable.Then yesterday i was trying to install a game from cd during which system got hanged. I restarted the system up on which power was coming but POST was not happening.There was no message on the monitor.I shutdown the system for 1 minute and tried booting with same result.After resetting the bios it started working.But now whenever i try restarting the system or when i shutdown and start again the POST is not happening.I have to shutdown and start again after some time for the system to work.Iam getting a CMOS checksum error default value loaded message.Iam not able to do any save in the BIOS.Please help me in resolving the problem

Pathik · 24-10-2007, 07:18 PM

Did u try to overclock ur proccy???
and for the CMOS check sum error just remove ur cmos battery and reset ur cmos settings using a jumper..

jackal_79 · 26-10-2007, 04:16 PM

No i have not tried to overclock it.From yesterday night onwards it is not even booting.When i switch on ,all the fans are working and there is an LED glowing on the motherboard.But the monitor just keeps on blinking and nothing else is not happening.Even the system LEd on the Cabinet is not glowing.

The_Devil_Himself · 26-10-2007, 04:32 PM

^^get it replaced dude.and what PSU are you using?

jackal_79 · 26-10-2007, 07:10 PM

Zebronics 500W

john_the_ultimate · 27-10-2007, 01:43 AM

Man, just get it replaced. I had to replace mine XFX 650i three times before I finally got a good n working mobo. Ist one had a bad memory slot and the next two were DOA.

bikdel · 28-10-2007, 11:33 AM

^^^ whats DOA?

man ive one pc with via board.... it had 4 memory slots...
it worked fine when i had 512 MB single... but when i added a similar stick, not one of the remaining 3 slots were working...ha. and only slot that i had been using was working.......

should have tried all slot before buyin...lol

The_Devil_Himself · 28-10-2007, 12:08 PM

DOA: Dead On Arrival.

bikdel · 28-10-2007, 12:19 PM

^^^ thanx... quite new to these foruming stuff

24-10-2007, 07:10 PM	#1 (permalink)
jackal_79 Right Off the Assembly Line Join Date: Aug 2007 Posts: 44	Problem with XFX 650i Ultra After seeing a lot of posts suggesting XFX 650i Ultra i bought the mobo.From day one iam facing issues.First it was shutting down suddenly without any warnings while system was working or sometime during the bootup .When restarting i will get a screen saying system is in safe mode, please reset your CPU frequency in the CMOS setup.But again it will shut down before i could do any thing.I tried with a different PSU and RAM with same result.I took the mobo to Rashi Peripherals from where i bought it.They did a BIOS update after which the mobo seemed to be some what stable.Then yesterday i was trying to install a game from cd during which system got hanged. I restarted the system up on which power was coming but POST was not happening.There was no message on the monitor.I shutdown the system for 1 minute and tried booting with same result.After resetting the bios it started working.But now whenever i try restarting the system or when i shutdown and start again the POST is not happening.I have to shutdown and start again after some time for the system to work.Iam getting a CMOS checksum error default value loaded message.Iam not able to do any save in the BIOS.Please help me in resolving the problem

24-10-2007, 07:18 PM	#2 (permalink)
Pathik Google Bot Join Date: Aug 2005 Posts: 9,751	Re: Problem with XFX 650i Ultra Did u try to overclock ur proccy??? and for the CMOS check sum error just remove ur cmos battery and reset ur cmos settings using a jumper..

26-10-2007, 04:16 PM	#3 (permalink)
jackal_79 Right Off the Assembly Line Join Date: Aug 2007 Posts: 44	Re: Problem with XFX 650i Ultra No i have not tried to overclock it.From yesterday night onwards it is not even booting.When i switch on ,all the fans are working and there is an LED glowing on the motherboard.But the monitor just keeps on blinking and nothing else is not happening.Even the system LEd on the Cabinet is not glowing.

26-10-2007, 04:32 PM	#4 (permalink)
The_Devil_Himself die blizzard die! D3? Join Date: Aug 2007 Location: Event horizon Posts: 2,340	Re: Problem with XFX 650i Ultra ^^get it replaced dude.and what PSU are you using? __________________ Stealing your women and horses since 1843.

26-10-2007, 07:10 PM	#5 (permalink)
jackal_79 Right Off the Assembly Line Join Date: Aug 2007 Posts: 44	Re: Problem with XFX 650i Ultra Zebronics 500W

Popular Categories

Popular Articles

Content Categories

Sister Sites

Follow Us

Facebook Channels

Digit Magazine

	Advertisements. Register and be a member of the community to get rid of them.
Advertisement

27-10-2007, 01:43 AM	#6 (permalink)
john_the_ultimate No pain....No gain Join Date: May 2005 Location: Kolkata Posts: 1,198	Re: Problem with XFX 650i Ultra Man, just get it replaced. I had to replace mine XFX 650i three times before I finally got a good n working mobo. Ist one had a bad memory slot and the next two were DOA. __________________ --------------------------------------------------- Faith is the boast of a man who is too lazy to investigate. ---------------------------------------------------

28-10-2007, 11:33 AM	#7 (permalink)
bikdel Alpha Geek Banned Join Date: May 2007 Location: Dharan, Nepal Posts: 572	Re: Problem with XFX 650i Ultra ^^^ whats DOA? man ive one pc with via board.... it had 4 memory slots... it worked fine when i had 512 MB single... but when i added a similar stick, not one of the remaining 3 slots were working...ha. and only slot that i had been using was working....... should have tried all slot before buyin...lol __________________ I'm not a GEEk, i still use Windows!

28-10-2007, 12:08 PM	#8 (permalink)
The_Devil_Himself die blizzard die! D3? Join Date: Aug 2007 Location: Event horizon Posts: 2,340	Re: Problem with XFX 650i Ultra DOA: Dead On Arrival. __________________ Stealing your women and horses since 1843.

28-10-2007, 12:19 PM	#9 (permalink)
bikdel Alpha Geek Banned Join Date: May 2007 Location: Dharan, Nepal Posts: 572	Re: Problem with XFX 650i Ultra ^^^ thanx... quite new to these foruming stuff __________________ I'm not a GEEk, i still use Windows!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Overclock my xfx 650i ultra	nishantv2003	Overclocking	5	07-10-2007 07:45 PM
XFX 650i Ultra : Another look ! + Testing with Q6600	darklord	Hardware Q&A	30	08-08-2007 01:52 AM
SATA/Ultra-ATA HDD; Jumper problem...PLEASE HELP...	h_kunte	Hardware Q&A	2	06-04-2007 04:36 PM
power dvd 7.2 ultra latest audio problem....	mayneu	Software Q&A	4	24-01-2007 01:47 AM
XFX5700 Ultra TV-Out Flickering Problem (S-Video Cable Used)	quad master	QnA (read only)	5	01-09-2004 09:01 PM