| Forum |
|
|||||||
| Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Right Off the Assembly Line
Join Date: Dec 2006
Posts: 46
|
Its one year old PC , AMD 3000+ 64 bit venice core , 512 ram , MSI rs482 motherboard , zebrinics cabinet and 740N samsung monitor . This morning when I started , nothing came onto the monitor , its blue light blinking . I open the signal cord and turned up the monitor . It is working , No probs with the monitor because as I have disconnected the signal cord it said connect the signal cord and the blue light was not blinking . while turning on , fans are running , even the HDD is ok as in the front of the cabinet the red light is on .( zebronics antibiotic cabinet ) . now what I should do ? |
|
|
| Advertisements. Register and be a member of the community to get rid of them. | |
|
Advertisement
|
|
|
|
#2 (permalink) |
|
Wise Old Owl
Join Date: Sep 2005
Posts: 1,486
|
looks like some ram or some cables are facing loose contact...and try running ur pc without the hdd(this had happened in my old pc , but this prob cant possibly come to newer ones..) . and try removing and re-connecting all cables.. it should work . & try a bios refresh as well , if that doesnt help..
|
|
|
|
|
#3 (permalink) |
|
Right Off the Assembly Line
Join Date: Dec 2006
Posts: 46
|
no I already ckecked the cable , there is no fault .
when I am turning it on, the 3 lEds in my keyboard turning on for 1 time as usual , only nothing in the monitor ....its light only blinking . is it a BIOS problem ? or a virus? I do use NOD32 . should I change the CMOS battery? while booting I tried to goto the bios so pressed Del but nothing happened . |
|
|
|
|
#4 (permalink) |
|
a_g = JPKN
Join Date: Mar 2006
Posts: 5,049
|
take out the RAM, clean its contacts with a pencil rubber & install it again.
now check & report back.
__________________
★----------�----------★ _ ★----------�----------★ |
|
|
|
|
#5 (permalink) | |
|
shadow hunter
Join Date: Mar 2007
Posts: 267
|
Quote:
im afraid....give a look here problem with motherboard Booting Problem with P4P800-VM
__________________
knowledge can be shared & must be BUT intelligence CAN'T be |
|
|
|
|
|
#6 (permalink) |
|
Alpha Geek
Join Date: Jun 2007
Location: Ichapore,West Bengal
Posts: 512
|
[quote=pkt3000]until last night my PC was fully OK . problem started this morning .
Its one year old PC , AMD 3000+ 64 bit venice core , 512 ram , MSI rs482 motherboard , zebrinics cabinet and 740N samsung monitor . This morning when I started , nothing came onto the monitor , its blue light blinking . I open the signal cord and turned up the monitor . It is working , No probs with the monitor because as I have disconnected the signal cord it said connect the signal cord and the blue light was not blinking . while turning on , fans are running , even the HDD is ok as in the front of the cabinet the red light is on .( zebronics antibiotic cabinet ) . this thing happened with my older monitor.it may not be a cabble problem or ram problem.mite be probs in the monitor itself. i had to send the monitor to the service centre.they got it repaired. |
|
|
|
|
#8 (permalink) |
|
Fast 'N' Furious
Join Date: Jul 2006
Location: Geek's Heaven
Posts: 9,119
|
same thing happend with my new xfx 650 mobo. got it replaced and now the replaced is working fine.
__________________
ToPsPeEeD = FaSt BuT StEaDy AMD Radeon HD 6850 OverClocked to 1 Ghz !!! Blog : http://topgeartopspeed.wordpress.com/ ---------------------------------------------------- Never buy viewsonic products : http://tinyurl.com/ykwx4oa |
|
|
|
|
#9 (permalink) |
|
troubleshooter
Join Date: Jun 2007
Location: Pune
Posts: 55
|
do u installed or uninstalled something the last night?
do u hav UPS or spikeguard? the prob is most probably with RAM or Moniter cable; chek for any broken contacts wher u connect the pin !! |
|
|
|
|
#10 (permalink) |
|
Right Off the Assembly Line
Join Date: Dec 2006
Posts: 46
|
no I didnt install / uninstalled anything last time and I have APC ups . how u can say prob in cable ? I told u the reasons " No probs with the monitor because as I have disconnected the signal cord it said connect the signal cord and the blue light was not blinking . "
well I forget to mention that CD drive is working too..I mean there are lights on LED and tray is working |
|
|
|
|
#11 (permalink) |
|
Wise Old Owl
Join Date: Sep 2005
Posts: 1,486
|
ya man . u got problem in mobo or ram mostly . if u disconnect the monitor completely , ur pc shud boot and u shud hear that beep sound on booting and num lock (usually) turns on . u see hdd activity loading ur os. also , hear ur windows ( if u're using it ) , logon sound. .
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New IRC channel started | The Unknown | Chit-Chat | 2 | 16-06-2007 08:19 PM |
| can to SMPS be started automatically? | digiFriend | Hardware Q&A | 11 | 21-01-2007 01:44 AM |
| Getting started with a new PC. | anandk | Tutorials | 6 | 09-01-2007 09:23 PM |
| Getting started with Linux for nOObs! | rakeshishere | Tutorials | 3 | 07-11-2006 10:12 PM |
| How to delete a thread that you have started? | aditya.shevade | QnA (read only) | 6 | 07-09-2006 10:58 PM |