Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Hardware Q&A
Register FAQ Calendar Mark Forums Read

Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections.

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 15-03-2007, 01:13 PM   #1 (permalink)
Always Questioning?
 
emailaatif786's Avatar
 
Join Date: Feb 2006
Location: Srinagar
Posts: 351
Question Components neded for Vista

My System Configuration is mentioned below:
System Manufacturer: "INTEL_"
System Model: "D865GBF_ Model 2004"
On-Board Video memory: "64Mb"
System Type: "X86-based PC"
Processor: "x86 Family 15 Model 2 Stepping 9 "
"GenuineIntel ~2793 Mhz"
BIOS Version/Date: "Intel Corp. BF86510A.86A.0060.P16.0404121116, 4/12/2004"
SMBIOS Version: "2.3"

Boot Device: "PATA1 80GB \Device\HarddiskVolume1"
Total Physical Memory: "Slot1 DDR1 256.00 MB"

I know that Windows vista will NOT run on my System, until I upgrade the system. If I will change only the below mentioned items in my system, will Vista run on it?
1):- One DDR1 RAM of 256Mb, ie; upgrade from 256Mb to 512Mb.
20:-One 256Mb Graphics Card, ie; upgrade from Onboard,64Mb to 64+245= 317Mb.

One dealer told me that I have to change my D865GBF Motherboard and also Family 15 Model 2 processor to Vista compitiable. I know that my board is NOT Vista Compitiable, but if I upgrade the RAM to 512 Mb and VideoCard to 256Mb, will'nt Vista run on my computer?
Also what will be the LOWEST cost of the Upgrade, ie; RAM & AGP VideoCard?
__________
__________________
Love Digit

Last edited by emailaatif786; 15-03-2007 at 01:13 PM. Reason: Automerged Doublepost
emailaatif786 is offline  
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 15-03-2007, 01:18 PM   #2 (permalink)
Human Spambot
 
Arsenal_Gunners's Avatar
 
Join Date: May 2005
Posts: 3,055
Default Re: Components neded for Vista

Reported double post
Components needed for Vista
Arsenal_Gunners is offline  
Old 16-03-2007, 03:23 PM   #3 (permalink)
Right Off the Assembly Line
 
Join Date: Mar 2007
Posts: 13
Default Re: Components neded for Vista

buy a geforce 6 class gcard along with 512 mb ram.
dominatorcs is offline  
Old 16-03-2007, 05:40 PM   #4 (permalink)
Be CoOl rAp RuLeZ !!!
 
krates's Avatar
 
Join Date: Feb 2007
Posts: 1,968
Default Re: Components neded for Vista

Hey I Am Already Running Vista On This Configuration I Think It' The Lowest

My System Configuration is mentioned below:
System Manufacturer: "Asus_"
System Model: "P4GE-MX"
On-Board Video memory: "64Mb"
Processor: "P-4 "
"2400 MHZ"
BIOS Version/Date: Asus 101001.BIN 2006
Ram 768
__________________
iPhone 3G 16GB + Samsung I450 + Sennheiser CXL 400 + PSP Phat + Samsung NC10

Previous phones: N73ME , W810I , Asus P320
krates is offline  
Old 16-03-2007, 07:56 PM   #5 (permalink)
In The Zone
 
Shasanka_Gogoi's Avatar
 
Join Date: Jan 2007
Location: NCR
Posts: 289
Default Re: Components neded for Vista

With ur config u can easily run the Home Basic edition of Vista, however , don't expect to see aero on it but maybe u could as u would be upgrading ur graphics but then it would be slower!
Shasanka_Gogoi is offline  
Old 16-03-2007, 08:10 PM   #6 (permalink)
The G-Axe Effect
 
gxsaurav's Avatar
 
Join Date: Jan 2007
Location: New Delhi
Posts: 5,579
Default Re: Components neded for Vista

Quote:
One dealer told me that I have to change my D865GBF Motherboard and also Family 15 Model 2 processor to Vista compitiable. I know that my board is NOT Vista Compitiable, but if I upgrade the RAM to 512 Mb and VideoCard to 256Mb, will'nt Vista run on my computer?
Also what will be the LOWEST cost of the Upgrade, ie; RAM & AGP VideoCard?
:rofl

Yo, Intel 865G & above chipsets are officially supported by Intel for Windows Vista, means there are official & proper drivers for it. No need to upgrade the CPU & motherboard, just get 1 GB RAM & A Geforce 6200 graphics card with 128 MB RAM as minimum. If you have the budget then go for AGP Geforce 7300GT with atleast 128 MB RAM.

With 512 MB RAM & a graphics card, Vista will run fine but 1 GB is recomended these days anyway. 865GBF has 4 RAM slots so you can increse RAM easily.

I m right now using it on 865GBF motherboard with 1 GB RAM & Geforce FX 5900XT graphics card.

The lowest config I have installed Vista home basic is Pentium 4 2.4 GHz with Intel 845GEBV2 motherboard with onboard graphics & 512 MB RAM. It runs fine with the default drivers in Windows Vista for the chipset etc.
__________________
Graphics & Web Designer - SlideShare
Portfolio & Blog : http://gxsaurav.com
gxsaurav is offline  
Old 01-05-2008, 10:25 AM   #7 (permalink)
Right Off the Assembly Line
 
Join Date: May 2008
Location: Mumbai, India
Posts: 2
Default Re: Components neded for Vista

You all talking about the lowest configuration??

Check this out:
  1. Intel Pentium 4 Processor 1.7GHz
  2. VIA VT8233A Motherboard
  3. PC133 512MB SDRAM (480MB after sharing)
  4. Onboard S3 ProSavageDDR 32MB Graphics (Shared)
  5. Samsung SV4012H 40GB PATA HDD
  6. LG HL-DT-ST DVD-RAM GSA-H55N
I have used the following operating systems on this PC:
  1. Windows 98 Second Edition
  2. Windows NT
  3. Windows 2000 Professional
  4. Windows XP (Build 2600) with Service Pack 2
  5. Windows Vista Starter Edition
  6. Windows Vista Home Basic Edition
  7. Windows Vista Ultimate Edition
As the topic of discussion goes, Windows Vista works "OK" on this configuration. As the different versions of Vista are concerned, Ultimate worked better than the Basic and Starter versions, I still can't configure how???

Anyways my ancient PC is still running fine. Upgraded it with a XFX GeForce 6200 256MB AGP Graphics Card recently to play some games. I am also going to buy a 512MB SDRAM so that my RAM increases to 1GB and I can turn on Aero Graphics (My current card supports Aero) on this ancient PC...
pankaj981 is offline  
Old 01-05-2008, 10:52 AM   #8 (permalink)
No pain....No gain
 
john_the_ultimate's Avatar
 
Join Date: May 2005
Location: Kolkata
Posts: 1,198
Default Re: Components neded for Vista

Look at the date of the first post people.

Even "saurav" has completely overhauled his system.
__________________
---------------------------------------------------
Faith is the boast of a man who is too lazy to investigate.
---------------------------------------------------
john_the_ultimate is offline  
Old 04-05-2008, 02:19 AM   #9 (permalink)
Right Off the Assembly Line
 
Join Date: May 2008
Location: Mumbai, India
Posts: 2
Default Re: Components neded for Vista

Aero works well on my p4 1.7ghz, xfx geforce 6200 256mb agp, 512mb sdram.
pankaj981 is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +5.5. The time now is 06:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2