long beeps....booting prob!!!

archillies · 12-03-2007, 11:19 PM

I recently built a budget pc with s754 mobo....I used it for a month and changed the new cabinet.....for this I moved all the parts frm old to new one...... while moving the mobo and video card they were applied some stress/force (due to tight screws)...now after installing everythng I hear continuous long beeps with a gap of 2-3 seconds....is it a mobo issue?

I found in some article that its Dram error code but guess its mobo one......I replaced ram/graphics card/hdd to hear the same beep......experts here plz suggest me wot to do now apart frm replacing mobo as I cant replace it frm the site I bought?

thanks in advance

my rig
==========================================
BIOSTAR NF325-A7 Socket 754 NVIDIA nForce3 250 ATX AMD Motherboard
AMD Athlon 64 3200+ Venice 2.2GHz 512KB L2 Cache Socket 754 Processor
3DFuzion 1GB 184-Pin DDR SDRAM DDR 400 (PC 3200) Desktop Memory
Maxtor 60GB HDD 5400 rpm
Creative Labs ATI Radeon 9600XT 256MB 600Mhz DDR AGP DVI
ARCTIC COOLING ALPINE64 92mm CPU Cooler
Ultra Wizard Black Mid Tower Case
===========================================

The Unknown · 12-03-2007, 11:23 PM

First Check All the parts in the box that whether they are connected properly or not. Mostly such problem occurs due to RAM. I also had this once when the RAM freqs. not matched and after replacing it, comp. started working.

archillies · 12-03-2007, 11:28 PM

No luck dude.....ram was new one too!!!

The Unknown · 12-03-2007, 11:29 PM

^^ How many RAM chips have you inserted?

archillies · 12-03-2007, 11:52 PM

just one see my rig

techtronic · 13-03-2007, 05:20 PM

Try to remove your graphics card and use the onboard video bus to insert the monitor's address bus

Also check the graphic card and motherboard for bent pins, capacitors or transistors