Virtual memory LOW :( (help)

tinku dhar · 23-02-2007, 06:43 AM

well ... ,

can anyone tell me y my Virtual memory LOW i have 20 + 80 GB HDD

and now i want to increase Virtual Memory Space plz tell me How much will be PErfect

My now INitial Size is = 400 MB
and MAX is 725 MB

Regards

sridatta · 23-02-2007, 07:25 AM

generally.. 1.5 times the size of your RAM is sufficient... If you are facing problems with VM, then there is no harm to increase it. Since, you say that u have two HDD, I would suggest you to allocate the virtual memory in the hard-disk on which windows is NOT installed which will slightly boost your systems' performance...

Any more queries?

dOm1naTOr · 23-02-2007, 08:05 AM

While setting size set the initial ns max at same value. In that case windows is relieved from the task of expanding the size from initial to max during load times.
Also first full defrag ur partition in which u gonna set the VM.

piyush gupta · 23-02-2007, 03:08 PM

there is no harm in increasing ur VM

u can increase also tell me whats ur RAM size

tinku dhar · 23-02-2007, 09:23 PM

Well my Ram is 256 MB SDRAM

Tech Geek · 23-02-2007, 09:28 PM

empty up ur drive where ever your OS is installed

tinku dhar · 23-02-2007, 09:30 PM

Quote:

Originally Posted by sridatta

generally.. 1.5 times the size of your RAM is sufficient... If you are facing problems with VM, then there is no harm to increase it. Since, you say that u have two HDD, I would suggest you to allocate the virtual memory in the hard-disk on which windows is NOT installed which will slightly boost your systems' performance...

Any more queries?

Plz give the detail of to do it

Tech Geek · 23-02-2007, 09:32 PM

Buy another 256MB stick

tinku dhar · 23-02-2007, 09:33 PM

Quote:

Originally Posted by Tech Geek

empty up ur drive where ever your OS is installed

Wat u mean by tht ?
__________
Well ... ,

i think this 256 MB is good tooo i will buy but now its not possible to Soo gemme some trick i got it be4 but dunno the link forgot

sridatta · 24-02-2007, 02:18 AM

Quote:

Originally Posted by tinku dhar

Plz give the detail of to do it

Right click on my computer, go to properties --> Advanced --> Settings under performance -> Advanced
Click change beside virtual memory
select the drive of harddisk on which ur windows is not installed and enter custom size as 384 mb to 500 mb suppose... You can also allocate more.. change the 384 to more..
click on SET
Now, deallocate the virtual memory buy choosing "no paging file" option for your drive on which ur windows is installed..(i.e. removing previous allocation) and save changes..

shantanu · 24-02-2007, 02:34 AM

IF you have 256 MB then set your Virtual memory to 512 512 in both initial and max.

s18000rpm · 24-02-2007, 02:46 AM

Quote:

Originally Posted by sridatta

select the drive of harddisk on which ur windows is not installed

a point to NOTE tinku

allocate the VM in non OS HDD, to gain better performance.
__________
this pic might be helpful

select "No Paging File" for C: Drive & allocate some space for Page File in other non OS Drive.

select the CustomSize (marked with blue circle), & set the desired size. (always keep both minimum & maximum as same)

shantanu · 24-02-2007, 02:48 AM

@s18000RPM are you saying that we should have the PF in another drive then root drive...

s18000rpm · 24-02-2007, 02:54 AM

yes. its reccomended in Microsoft's Support Page itself

Quote:

To enhance performance, it is good practice to put the paging file on a different partition and on a different physical hard disk drive.

That way, Windows can handle multiple I/O requests more quickly. When the paging file is on the boot partition, Windows must perform disk reading and writing requests on both the system folder and the paging file. When the paging file is moved to a different partition, there is less competition between reading and writing requests.

read the whole quote, very imp. stuff.

for those having two+ HDD

source: Microsoft Support - Article 314482

shantanu · 24-02-2007, 02:58 AM

I thought you were saying that multiple PF for each drive

my mistake

deathvirus_me · 24-02-2007, 09:31 AM

Infact PF extended over multiple drives is recommended too ..

tinku dhar · 24-02-2007, 05:07 PM

Quote:

Originally Posted by s18000rpm

a point to NOTE tinku

allocate the VM in non OS HDD, to gain better performance.
__________
this pic might be helpful

select "No Paging File" for C: Drive & allocate some space for Page File in other non OS Drive.

select the CustomSize (marked with blue circle), & set the desired size. (always keep both minimum & maximum as same)

Dude i gave Reputation hehe

well now tell me wat suld be the MB in INTIAL and MAX ?

i mean how much suld be Good ?

s18000rpm · 24-02-2007, 05:40 PM

500 is enough, but if you have PhotoShop, then make it 1GB

wizrulz · 24-02-2007, 05:48 PM

The recommended minimum size is equivalent to 1.5 times the RAM on your computer, and 3 times that figure for the maximum size.For best performance, do not set the initial size to less than the minimum recommended size under 'Total paging file size for all drives'

Just a suggestion...

tinku dhar · 24-02-2007, 05:55 PM

I will keep 800 MB both for initial as well as MAX is it ok ?

i have 40 Gb of space in one Drive and my ram is 256 MB

s18000rpm · 24-02-2007, 05:58 PM

no problem.

caleb · 24-02-2007, 06:01 PM

^^That'll do tinku, that'll do.

shantanu · 24-02-2007, 06:03 PM

No @ wizrulz its not recommended.. in Xp blue screen error become frequent by that..

wizrulz · 24-02-2007, 06:04 PM

Quote:

Originally Posted by shantanu_webmaster

No @ wizrulz its not recommended.. in Xp blue screen error become frequent by that..

by what can u explain????

shantanu · 24-02-2007, 06:09 PM

ok ... When multiple PF is placed in different partitions .. windows xp uses it for the programs stored in that drive only.. and copies that data back to the main system PF whether stored in C or after that in any drive like : if PF is not in C then it will check D..

SO now if a program in F drive runs it will be copied to the master PF and then will run.. so the thing is when you run a game or heavy app. then two pf's will be used and DATA transfer rates will vary among partitions... so they will reproduce a blue screen error or that error which says.........

The memory could not be read or write...

that STOP x0xxxxx one..... read HELP and SUPPORT OF WINDOWS XP also you will see it there also....

wizrulz · 24-02-2007, 06:10 PM

aree baba when i said to have multiple PF is placed in different partitions ???

this is from microsoft site

Quote:

Notes• To have Windows select the best paging file size, click System managed size. The recommended minimum size is equivalent to 1.5 times the RAM on your computer, and 3 times that figure for the maximum size. For example, if you have 256 MB of RAM, the minimum size is 384 MB, and the maximum size is 1152 MB.
• For best performance, do not set the initial size to less than the minimum recommended size under Total paging file size for all drives. The recommended size is equivalent to 1.5 times the RAM on your computer. It is good practice to leave the paging file at its recommended size. However, you may increase its size if you frequently use programs that use much memory.
• To delete a paging file, set both the initial size and the maximum size to zero, or click No paging file. We strongly recommend that you do not disable or delete the paging file.