 |
29-01-2007, 02:10 PM
|
#1 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Hi
I have a fully fine working AMD 64 bit PC with ASUS M2NPV-VM Socket AM2 MB. It has 1394 port enabled in BIOS as well as cable is connected inside the ATX cabinet too...still it cant recognize my canon MV850i camcorder ...by firewire cable 
Can anybody help plzzzzz....
|
|
|
|
Advertisements. Register and be a member of the community to get rid of them.
|
|
Advertisement
|
|
|
29-01-2007, 02:31 PM
|
#2 (permalink)
|
|
Wise Old Owl
Join Date: Jun 2004
Location: Delhi
Posts: 1,466
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Not sure, but does it require a driver to be installed? If so them that might be the problem.
Install the driver.
|
|
|
|
|
29-01-2007, 02:46 PM
|
#3 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
maybe...lemme chk
|
|
|
|
|
29-01-2007, 03:02 PM
|
#4 (permalink)
|
|
In The Zone
Join Date: Jun 2006
Posts: 372
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
^^Does the firewire port show up in network connections?
__________________
C2D E8400@3.8, P5N32-E SLI, 2GB Cellshock DDR2 1000(4-4-4), 8800 Ultra SLI, 2.7TB storage, CM Stacker 830, TT 1200W, Dell 2005FPW, Lots of Audio HW.
|
|
|
|
|
29-01-2007, 03:55 PM
|
#5 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
No Chaos.it doesnt show in network connections .......
|
|
|
|
|
29-01-2007, 04:38 PM
|
#6 (permalink)
|
|
Wire muncher!
Join Date: Nov 2003
Posts: 6,173
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
must be a driver issue. check the driver and see if resourcers (like irq etc.) are available to the controller. also check if the cable from the port to the motherboard is connected correctly. many a times it may haf many individual connectors not connected correctly! use a software like everest to see the system properties and whether it detects it. also configure ur video capturing software to search for the device on firewire port. many a times the default is usb.
__________________
"The true measure of a man is how he treats someone who can do him absolutely no good."
http://phoenix-ani.blogspot.com
|
|
|
|
|
29-01-2007, 04:51 PM
|
#7 (permalink)
|
|
In The Zone
Join Date: Mar 2006
Posts: 266
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
check in "device manager". and it will also show in "network connection"
__________________
you never know what you can do until you try
|
|
|
|
|
29-01-2007, 04:53 PM
|
#8 (permalink)
|
|
In The Zone
Join Date: Mar 2006
Posts: 266
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
network connection image
__________________
you never know what you can do until you try
|
|
|
|
|
05-02-2007, 03:15 PM
|
#9 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
bhai logo..i tried everywhere..it shows in n/w connections as well as device manager "TEXAS INSTRUMENTS OHCP 1394 NET ADAPTER" still when I connect my canon MV850i camcorder ...it doesnt detect anything...
same is the result when I tried it on my friend's PC
plz help
|
|
|
|
|
05-02-2007, 08:17 PM
|
#10 (permalink)
|
|
Wise Old Owl
Join Date: Jun 2004
Location: Delhi
Posts: 1,466
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
seems that you may have some switch/mode to change on the camera to make it detected as a device, I remember my friend having such problem on usb port, later I found that there is a mode on the camera which if not selected it wont show & get detected as a USB device.
Is the same applicable with ur camcorder?
__________________
E6300@3.304Ghz,P5B-Dlx Wifi, 4GB Transcend DDR2 800Mhz, XFX 7600GT,Lenovo 20"Widescreen LCD, Seagate SATA2 HDD 1.5TBx2,Sony DVDRW,Creative 4.1 speakers,APC UPS 800VA,Logitech wireless mouse.
|
|
|
|
|
05-02-2007, 11:04 PM
|
#11 (permalink)
|
|
The High 5 Flyer
Join Date: Jun 2005
Location: New Delhi
Posts: 1,772
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Originally Posted by ranjan2001
seems that you may have some switch/mode to change on the camera to make it detected as a device, I remember my friend having such problem on usb port, later I found that there is a mode on the camera which if not selected it wont show & get detected as a USB device.
Is the same applicable with ur camcorder?
|
He is connecting using IEEE and not USB.
__________
Quote:
|
Originally Posted by esumitkumar
bhai logo..i tried everywhere..it shows in n/w connections as well as device manager "TEXAS INSTRUMENTS OHCP 1394 NET ADAPTER" still when I connect my canon MV850i camcorder ...it doesnt detect anything...
same is the result when I tried it on my friend's PC
plz help |
Try connecting on a different port or changing cable. Which IEEE cable are you using.......4-6
Check this thread out might help.....
Camcorder USB to Firewire to Video Capture/Editing: Possible?
Last edited by sam9s; 05-02-2007 at 11:07 PM.
Reason: Automerged Doublepost
|
|
|
|
|
06-02-2007, 07:56 AM
|
#12 (permalink)
|
|
Wise Old Owl
Join Date: Jun 2004
Location: Delhi
Posts: 1,466
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
He is connecting using IEEE and not USB
|
Yes I know, I gave that specific USB example of my friends camera.
Point I am making, does the camera has switch to make it detected as a device then that has to be switched on.
__________________
E6300@3.304Ghz,P5B-Dlx Wifi, 4GB Transcend DDR2 800Mhz, XFX 7600GT,Lenovo 20"Widescreen LCD, Seagate SATA2 HDD 1.5TBx2,Sony DVDRW,Creative 4.1 speakers,APC UPS 800VA,Logitech wireless mouse.
|
|
|
|
|
06-02-2007, 10:09 AM
|
#13 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Try connecting on a different port or changing cable. Which IEEE cable are you using.......4-6
|
Ya I am using 4-6 cable ...I will try changing the cable ..but I wonder same cable was working fine with my old PC...
Quote:
|
Point I am making, does the camera has switch to make it detected as a device then that has to be switched on.
|
No yaar..camera doesnt have any switch like this..You have to turn it on and just play the movie recorded ...thats it..
Thanks for all suggestions...
|
|
|
|
|
06-02-2007, 03:51 PM
|
#14 (permalink)
|
|
The High 5 Flyer
Join Date: Jun 2005
Location: New Delhi
Posts: 1,772
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Originally Posted by ranjan2001
Yes I know, I gave that specific USB example of my friends camera.
Point I am making, does the camera has switch to make it detected as a device then that has to be switched on.
|
Nope camm doent have to switch to any mode to be detectable. You just switch it on and should be detected.
Quote:
|
Ya I am using 4-6 cable ...I will try changing the cable ..but I wonder same cable was working fine with my old PC...
|
mmmmm so you were able to use the camm with your old PC. Any drastic h/w or s/w changes, like maybe XP SP2, just trying to narrow down things.....
Try reinstalling the driver through your mobo cd as well........
|
|
|
|
|
07-02-2007, 01:02 AM
|
#15 (permalink)
|
|
Coming back to life ..
Join Date: Nov 2003
Location: A bit closer to heaven
Posts: 1,997
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
There was one patch for FireWire for Windows XP Sp2 .. Try installing that and see if that helps.
http://support.microsoft.com/kb/885222
Also search MS KB for FireWire ..
__________________
Sleight of hand and twist of fate...
On a bed of nails she makes me wait...
And I wait without you ...
With or without you ..
----
Batty = Too Busy Now !!!
|
|
|
|
|
07-02-2007, 11:53 AM
|
#16 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Any drastic h/w or s/w changes, like maybe XP SP2, just trying to narrow down things.....
|
Ya I had changed my whole PC...Its AMD 64 bit 3600 + , 1 GB RAM, ASUS M2v NVVM MB and Win XP Pack 3.....Earlier it was P-III 700 MHz, 810 MB and 128 MB RAM with Win 98 ...
Also I have SATA 2 disk now and I think I cant install Win 98 on it
|
|
|
|
|
07-02-2007, 02:28 PM
|
#17 (permalink)
|
|
In The Zone
Join Date: Mar 2006
Posts: 266
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Originally Posted by esumitkumar
bhai logo..i tried everywhere..it shows in n/w connections as well as device manager "TEXAS INSTRUMENTS OHCP 1394 NET ADAPTER" still when I connect my canon MV850i camcorder ...it doesnt detect anything...
same is the result when I tried it on my friend's PC
plz help |
then your question should be "camcorder not detected".
as your ieee 1394 port is already recognized.
some camcorder has to select output in its Menu " USB 2.0 or Firewire"
try to restart pc after camcorder is connected.
__________________
you never know what you can do until you try
Last edited by digiFriend; 07-02-2007 at 02:42 PM.
|
|
|
|
|
20-02-2007, 04:53 PM
|
#18 (permalink)
|
|
Call me Sumit
Join Date: Feb 2004
Posts: 1,418
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
I have tried everything..there is no driver on canon site for XP...plz help
|
|
|
|
|
20-02-2007, 07:06 PM
|
#19 (permalink)
|
|
Banned
Join Date: Oct 2006
Location: Durgapur
Posts: 1,785
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Didnt they supply a driver cd along with the cam when u bought it?
|
|
|
|
|
20-02-2007, 07:18 PM
|
#20 (permalink)
|
|
Wise Old Owl
Join Date: Jun 2004
Location: Delhi
Posts: 1,466
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Contact ur local canon dealer /service center , they should be able to help out for sure.
__________________
E6300@3.304Ghz,P5B-Dlx Wifi, 4GB Transcend DDR2 800Mhz, XFX 7600GT,Lenovo 20"Widescreen LCD, Seagate SATA2 HDD 1.5TBx2,Sony DVDRW,Creative 4.1 speakers,APC UPS 800VA,Logitech wireless mouse.
|
|
|
|
|
21-02-2007, 10:57 AM
|
#21 (permalink)
|
|
The High 5 Flyer
Join Date: Jun 2005
Location: New Delhi
Posts: 1,772
|
Re: IEEE 1394 port not recognized in new ASUS M2NPV-VM Socket AM2
Quote:
|
Originally Posted by esumitkumar
Ya I had changed my whole PC...Its AMD 64 bit 3600 + , 1 GB RAM, ASUS M2v NVVM MB and Win XP Pack 3.....Earlier it was P-III 700 MHz, 810 MB and 128 MB RAM with Win 98 ...
Also I have SATA 2 disk now and I think I cant install Win 98 on it
|
cant seem to narro down.......there is a complete overhall in the system.......I guess you were using a dedicated firewire card in your old system, coz a P-III board would not be having an inbiult one. Try plugging that IEEE card in your new system. Disable the onboard one from bios install the new one. I dont think you would even be needing drivers for the dedicated card as you already have xp sp2, still keep in hand, incase needed. After card instillation try plugging the camm and see if it gets detected on the dedicated card.............
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
