Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Hardware Q&A
Register FAQ Calendar Mark Forums Read

Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections.


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 20-12-2006, 10:46 PM   #1 (permalink)
Apprentice
 
Join Date: Mar 2005
Location: Mars
Posts: 72
Red face dual channel query


hi
what is dual channel memory? i have 1*512 ram, would it have made any difference if it was 2*256? does dual channel speed things up?
nd if i make total ram upto 1gb, will it give a huge performance gain over 512mb? i hav athlon xp 3000+ nd asus a8-nvm....
Omsck is offline  
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 21-12-2006, 12:22 AM   #2 (permalink)
Human Spambot
 
Arsenal_Gunners's Avatar
 
Join Date: May 2005
Posts: 3,112
Default Re: dual channel query

to know details about dual channel go here http://en.wikipedia.org/wiki/Dual-channel
yes it would make a difference if you had 2*256mb rams but only a slight one
i have tried both 2*512 and single 1 gb sticks.but didnt notice any significant increase in performance.in short no huge performance gains.
Arsenal_Gunners is online now  
Old 21-12-2006, 02:59 AM   #3 (permalink)
Broken In
 
gsmsikar's Avatar
 
Join Date: Feb 2004
Location: india
Posts: 162
Default Re: dual channel query

Quote:
Originally Posted by Omsck
hi
what is dual channel memory? i have 1*512 ram, would it have made any difference if it was 2*256? does dual channel speed things up?
nd if i make total ram upto 1gb, will it give a huge performance gain over 512mb? i hav athlon xp 3000+ nd asus a8-nvm....
do u want to try or u need exact answer ?
if u want to try then try it yourself or else
go according to ur motherboard ....
if it says that it support dual channel then u should use two memory sticks of same speed with the motherboard .., as u say that u r using AMD then u should go for Dual-channel architecture DDR/DDR2 SDRAM,
and for better result go for Dual-Channel DDR400,
gsmsikar is offline  
Old 09-01-2007, 01:16 AM   #4 (permalink)
Broken In
 
gsmsikar's Avatar
 
Join Date: Feb 2004
Location: india
Posts: 162
Default Re: dual channel query

how to know which RAM module is dual channel capable or not ?

i am getting a
UMAX DDR DIMM 512MB module with 8 chips (U2S12D30TP-5) in a single side and the other side is empty ...

is that dual channel not?
gsmsikar is offline  
Old 09-01-2007, 02:33 AM   #5 (permalink)
Learner
 
Kniwor's Avatar
 
Join Date: Sep 2005
Location: Chicago
Posts: 2,008
Default Re: dual channel query

Quote:
Originally Posted by gsmsikar
how to know which RAM module is dual channel capable or not ?

i am getting a
UMAX DDR DIMM 512MB module with 8 chips (U2S12D30TP-5) in a single side and the other side is empty ...

is that dual channel not?
A double sided ram,and a set of ram running in dual channel is 2 diffrent things. It seems that you are confusing them

Last edited by Kniwor; 09-01-2007 at 02:46 AM.
Kniwor is offline  
Old 09-01-2007, 11:33 AM   #6 (permalink)
Broken In
 
gsmsikar's Avatar
 
Join Date: Feb 2004
Location: india
Posts: 162
Default Re: dual channel query

Quote:
Originally Posted by Kniwor
A double sided ram,and a set of ram running in dual channel is 2 diffrent things. It seems that you are confusing them
i am not confusing them , for them i had given the reply correctly ,,

but in my second post i wanted to know that how to know if a RAM module is Dual Channel or not?
gsmsikar is offline  
Old 09-01-2007, 11:51 AM   #7 (permalink)
The Devil
 
blackpearl's Avatar
 
Join Date: Feb 2006
Location: 0x02AE88C6FF
Posts: 983
Default Re: dual channel query

RAM modules are not dual channel, its the way you install them on your mobo that makes it dual channel. Basically, there are 2 channels on your mobo (provided your mobo supports dual channel) throught which data is transfered to and fro the processor and the RAM. If you place 2 RAM sticks on 2 different channels you are increasing data transfer thoroughput by double. One analogy to this is 1 lane road and 2 lane road. 1 lane road is similar to single channel mode where only one line of cars can move at one time. In a 2 lane road, 2 lines of cars can move at the same time therby increasing traffic throughput. On a 2 lane road you will reach your office faster, similarly your PC will speed up when on a dual channel mode.
blackpearl is offline  
Old 09-01-2007, 12:05 PM   #8 (permalink)
The High 5 Flyer
 
sam9s's Avatar
 
Join Date: Jun 2005
Location: New Delhi
Posts: 1,772
Default Re: dual channel query

Quote:
Originally Posted by Omsck
hi
what is dual channel memory? i have 1*512 ram, would it have made any difference if it was 2*256? does dual channel speed things up?
nd if i make total ram upto 1gb, will it give a huge performance gain over 512mb? i hav athlon xp 3000+ nd asus a8-nvm....
Dual channel memory are designed to use both channels of your motherboard memory controller. Though you can have 1*512 you are not utilizing the true data throughput from the memory controller, for that memory should be installed on both the channels of the motherboard. Usually the chanels are color coded. It usually written on the mobo as well.

About the performance gain, practically speaking you would only notice difference in heavy multitasking or during game level load time.
__________
Quote:
Originally Posted by gsmsikar
how to know which RAM module is dual channel capable or not ?

i am getting a
UMAX DDR DIMM 512MB module with 8 chips (U2S12D30TP-5) in a single side and the other side is empty ...

is that dual channel not?
All DDR ram support dual channel configuration. You just need to set them up correctly on a dual channel supporting mobos.

Last edited by sam9s; 09-01-2007 at 12:05 PM. Reason: Automerged Doublepost
sam9s is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
Latest Threads
- by icebags
- by trublu
- by Sujeet

Advertisement




All times are GMT +5.5. The time now is 10:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2