Problem with dataone router

[keep_it_rl]

hey guys
i am using dataone bb 900ul plan
with adsl modem utsatrcom 300r2u
sometimes during surfing my modem hangs
and thn i have to restart my computer and modem to connect to net
plz help

[n2casey]

Originally Posted by keep_it_rl

hey guys
i am using dataone bb 900ul plan
with adsl modem utsatrcom 300r2u
sometimes during surfing my modem hangs
and thn i have to restart my computer and modem to connect to net
plz help

R u using ADSL splitter or not?

[Choto Cheeta]

also check the modem config, ADSL modulation if it is G.Dmt option it is ok if not set it G.Dmt option save it and reboot it

[~Phenom~]

offtopic: I use DATAONE BB and I have SmartAX MT882 modem / router.
I wanna know if its a modem or a router. whats the difference between modem and router ????
If its a router , how the data gets transferred without the use of modem ???

[techtronic]

^^ Officially the ADSL Router is a router/modem

It acts as a router by forwarding the required routes from your PC to the internet

It acts as an ADSL Modem by using PPPoE (Point to Point Protocol over Ethernet)

[keep_it_rl]

Yes dude m usin adsl router ,for first 40 days my modem was workin fine im havin this prblm from past 4-5 days....

Lemme Xplain u the Prblms In Detail
Its like evrything is going smoothly but suddenly the web pages stop loading.
But i can see the lan icon on the taskbar showing tht am still connected to the net.But practically its disconnected coz pages rnt loading anymore.
Now i try to disconnect the net by right clicking on the lan icon but it doesnt disconnect.Now i try double clickng the broadband dialer,but nothing heppens i retry double clicking it but still no result..
Now with no other way left i restart my modem and computer and then try to connect thn only i can connect....
But somtimes i evn have to restrt my computer several times...
is it due to my modem ,pc or isp
__________
__________
hey saurav i did tht and wht does g.dmt means dawg

[~Phenom~]

Originally Posted by techtronic

^^ Officially the ADSL Router is a router/modem

It acts as a router by forwarding the required routes from your PC to the internet

It acts as an ADSL Modem by using PPPoE (Point to Point Protocol over Ethernet)

Thanx bro.
Now when We used to use dial up connection via 56Kbps modem , what used to act as router ????

[dissel]

Originally Posted by keep_it_rl

Yes dude m usin adsl router ,for first 40 days my modem was workin fine im havin this prblm from past 4-5 days....

Lemme Xplain u the Prblms In Detail
Its like evrything is going smoothly but suddenly the web pages stop loading.
But i can see the lan icon on the taskbar showing tht am still connected to the net.But practically its disconnected coz pages rnt loading anymore.
Now i try to disconnect the net by right clicking on the lan icon but it doesnt disconnect.Now i try double clickng the broadband dialer,but nothing heppens i retry double clicking it but still no result..
Now with no other way left i restart my modem and computer and then try to connect thn only i can connect....
But somtimes i evn have to restrt my computer several times...
is it due to my modem ,pc or isp
__________
__________
hey saurav i did tht and wht does g.dmt means dawg

First check your modem statics/info page by entering 192.168.1.1.....Hope all values are normal....if not the problem is from the ISP side or in the Telephone line....or if you have dual boot OS try with a different OS....It will clear that if you have any problem(virus attack) in your OS or not ?

AFAIK
G.dmt modulation can deliver high-speed data communications at
rates up to 8 Mbps on the downstream, 864 Kbps on the upstream.
G.DMT [full-rate ADSL] expands the useable bandwidth of existing
copper telephone lines [Correct me if i am wrong]

[keep_it_rl]

Transmit
Align Error Count 0
Single Collisn Frame Count 0
SQE Test Errors Count 0
Late Collisn Count 0
Internal MAC Rx Errs count 0
Carrier Sense Errs count 0
Tx count 320031
Control Pause count 0
Receive
FCS Error count 0
Two Collisn Frame count 0
Deferred Transaction count 0
Excess Collisn count 0
Internal MAC Tx Errs count 0
Frame Too Long count 0
Rx count 315281
Total Collisn count 0




ADSL Status
ADSL status shows the ADSL physical layer status.
ADSL Firmware Version: E.37.5.3
Line State: Showtime/Data
Modulation: G.dmt
Local/Remote Tx Power: 1.17 dB / 1.99 dB



Item Downstream Upstream Unit
SNR Margin 34.0db 14.0db dB
Line Attenuation 28.5db 12.5db dB
Loss of Signal 0 0
CRC Errors 8 0
Data Rate 2048 Kbps 512 Kbps kbps
Latency Fast Fast
Dude these are the stats are they normal

[techtronic]

Originally Posted by ~Phenom~

Thanx bro.
Now when We used to use dial up connection via 56Kbps modem , what used to act as router ????

^^ Enlighten Yourself.Wake Up

Source : http://www.cadvision.com/blanchas/In...v2/56kbps.html

[dissel]

Though my modem is different, here is the screen shot

Originally Posted by keep_it_rl

Item Downstream Upstream Unit
SNR Margin 34.0db 14.0db dB
Line Attenuation 28.5db 12.5db dB
Loss of Signal 0 0
CRC Errors 8 0
Data Rate 2048 Kbps 512 Kbps kbps
Latency Fast Fast
Dude these are the stats are they normal

As far as i know.....

It seems
your upstream & downstream SNR is problematic.
though attenuations are somehow ok.
Your modem UTStar 300R,so you can't get this field value like MT882.


and how you get 512kbps/2048kbps ??????
This is highly questionable...Earlier you mention you have 900ul plan....
so your value must be 256kbps/2048kbps.
Possible cause....BSNL's local router can't synchronize your connection.
(correct me if i am wrong)

Check your line with BSNL's guys.

[keep_it_rl]

hey dissel
thx a lot for ur support
rite
yesterday i tried this , vn the something occured i dint resboot the modem i rebooted the computer thn i got connected
so i reinstalled xp ,after reinstalling xp the modem worked fine for bout 17 hours...thn the same bullshit occured
I am vry confused wht is it actully i dnt even understand if this the way modem hangs or nt