Best performance from RAM

[mananknl]

I have a Intel P4 2.8 Ghz with 2x512 PC3200 RAM.My mobo is intel 915gav.
Now i bought the second ram today only.Should i use this ram in dual mode or single mode?Also timings of my previous ram do not match with that of new ram.what should i do? given below r the timings shown by cpu-z.please help







Free Photo Hosting - PicTiger

[codename_romeo]

From the pics it is evident that both the rams belong to 2 different manufacturer. So it is quite obvious that they dont match. AFAIK not much can be done about it.

[mananknl]

so which mode should i use(single or dual)???

[samrulez]

Don't run it in Dual Channel...coz the timings don't match....and your ram is not working at 400MHz ...its @320MHz ...

[codename_romeo]

ya use it in single mode.

[mananknl]

I shifted to single channel but cpu-z is still showing 160 Mhz


Also i benchmarked my memory using Performance Test application nd it showed better performance when i used it in dual channel???

[deathvirus_me]

For a Pentium i'd always suggest Dual Channel , even for mismatched modules .. the mobo should be smart enough to detect the ideal latency combination for the modules .. from what i can see u may try the 2.5,4,4,8 for all the modules ..

Also , the strange thing is that the FSB:RAM ratio is 5:4 in default ... it should be 1:1 .. see if u can manually select the RAM freq. from the bios .. if so then set it to ddr400 (i think even Intel Originals will let u do this) ...