realtek 5.1 problem

sujeet2555 · 01-03-2011, 05:23 PM

my pc config is:
asus m3a78 em, amd 9650 x4.2gb ram,500gb hd .5.1 audio system and running win7.
my pc was running fine untill i decided to clean it.i just switched it off,removed cover and blow out all the dust and closing it.while doing it i had unplugged all the cable from the back.after attaching all the cables and starting up.
my bios get reset to default by it's own.i just set the settings in bios as previous.after getting in to window.i checked all the connection .but while checking through realtek audio manager,i found out front speakers are not working.all the cables are connected ok.there is a unusual thing i noticed as

green one is front out,as i plug front audio cable in it ,it becomes center/subwoofer out.while yellow one also the same .i that's why i am getting no audio from front.cables are fine [check by plugging it into side speakers]
can anyone tell why realtek is showing this weird thing.

d3p · 02-03-2011, 04:09 PM

Connect everything back properly & map the audio outputs in Realtek Audio manger.

sujeet2555 · 03-03-2011, 04:58 PM

Quote:

Originally Posted by d3p5kor

Connect everything back properly & map the audio outputs in Realtek Audio manger.

I have posted here after doing every type of troubleshooting as known to me.its simple isn't it,i connected rear audio cable to rear out [connection OK],center/sub cable to center/sub out [OK], but when i connect front audio cable to front out[green one],it shows center/sub in audio manager.when i play subwoofer i my sub+front right both plays.similarly when i play center my front left play.
likewise when i plug front audio cable into side speaker out and change my config to 7.1 in audio manager both speakers plays ok.but won't work in front out.

**asingh** · 03-03-2011, 05:01 PM

Remove the Realtek chipset drivers. Restart. Install again, and restart.

sujeet2555 · 06-03-2011, 01:17 AM

thank you for all your replies,just fiddled some settings in bios and also reinstalled drivers.solved the problem by trial and error.
also i saved this profile in the bios and i tried to load previous profile but that didn't work.
once again thanx.