Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Hardware Q&A
Register FAQ Calendar Mark Forums Read

Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections.


Reply
 
LinkBack Thread Tools Display Modes
Old 11-12-2010, 08:39 AM   #1 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot Itself


Hello,

(1) When I Switch ON UPS, then PC Restart (Boot) automatically.

(2) When I put PC to Standby Mode, even then then it Restart (Boot) automatically.

What is the problem
jbohaj is offline   Reply With Quote
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 11-12-2010, 11:30 AM   #2 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,545
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

System configuration.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is offline   Reply With Quote
Old 11-12-2010, 08:12 PM   #3 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

dear, following is system config: -

Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family

Today another problem arise i.e. After shutting down, PC start automatically.

Where is fault?, why these problems appearing one by one. Please tell solution.
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family
jbohaj is offline   Reply With Quote
Old 11-12-2010, 08:43 PM   #4 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,545
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Powersupply..?
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is offline   Reply With Quote
Old 11-12-2010, 09:07 PM   #5 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

sorry, are your asking or telling?
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family
jbohaj is offline   Reply With Quote
Old 11-12-2010, 09:14 PM   #6 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,545
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

^^
Asking.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is offline   Reply With Quote
Old 11-12-2010, 09:40 PM   #7 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,119
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

@jbohar, what is the SMPS you having?

@asingh, can't it be cause of some setting in BIOS? some motherboard have option in BIOS that turn PC on as soon as they get power. can't it be same case with OP?
Sam is online now   Reply With Quote
Old 18-12-2010, 09:25 AM   #8 (permalink)
Never give up!!
 
jerrin_ss5's Avatar
 
Join Date: Dec 2009
Posts: 182
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

check whther ur power supply is delivering proper power !!
if ur mo-bo has on-board LED's use that to gauge it !!!
__________________
AMD Phenom-II X4-810:| || Zotac 8200 A-E :sad:||OCZ PC2 6400 -2GB + 1GB (platinum + gold edition ):-) || Segate 250GB & WD green 500GB :||| ZOTAC GTX 460 1Gb DDR5 :grin:|| Cooler Master GX550W Bronze:||| AOC 2236VW:grin:.
jerrin_ss5 is offline   Reply With Quote
Old 19-12-2010, 10:40 AM   #9 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks but problem is still arising. while running, sometime PC start automatically. Also PC Starts on Shut Down & if putting on Standby.

@ Sam: Power Supply is Tech-Com, Model - PSP 4500 (450 Watt).
Where in BIOS this setting is situated?

@ Jerrin: Please tell how proper distribution of Power Supply can be checked?
Also, IF mo-bo has on-board LED', then where it situated & on mo-bo & how to gauge it?

Please tell how to create a Image with Norton Ghost at this Post: -
With NortonGhost, HowToCreate ImageOf 'Installed Software Only'To Solve Wndws Problms
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family

Last edited by jbohaj; 19-12-2010 at 10:43 AM. Reason: Automerged Doublepost
jbohaj is offline   Reply With Quote
Old 19-12-2010, 03:09 PM   #10 (permalink)
Never give up!!
 
jerrin_ss5's Avatar
 
Join Date: Dec 2009
Posts: 182
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

the led placement for mo-bo differ for each brand !!
but in ur case i think ther's no LED on ur mo-bo!!
so now the only option is to check ur mo-bo with someone else's power supply !!!
__________________
AMD Phenom-II X4-810:| || Zotac 8200 A-E :sad:||OCZ PC2 6400 -2GB + 1GB (platinum + gold edition ):-) || Segate 250GB & WD green 500GB :||| ZOTAC GTX 460 1Gb DDR5 :grin:|| Cooler Master GX550W Bronze:||| AOC 2236VW:grin:.
jerrin_ss5 is offline   Reply With Quote
Old 19-12-2010, 05:36 PM   #11 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks jerrin.. I'll test mo-bo with other Power Supply. But from last 2-3 years, PC is running on 450 Watt power Supply. My friend has Power Supply of 650 watts, if I test mo-bo with that (650 Watt Power Supply). Can it cause harm to mobo or to HDD??

Also please see above Post URL Link regarding Norton Ghost.

Thanks.
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family

Last edited by jbohaj; 19-12-2010 at 05:42 PM.
jbohaj is offline   Reply With Quote
Old 19-12-2010, 08:15 PM   #12 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,545
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

At OP. For starters try to reset CMOS. Remove the PSU cable, and press the chassis on/off button for 2-3 seconds. Then remove the CMOS battery for 2 minutes. Plug it back ion and see if you can boot it normally.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is offline   Reply With Quote
Old 20-12-2010, 02:11 PM   #13 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks Asingh.
1st Step: Are you talking about removing PSU cable from mo-bo??. if yes, this step is ok.

2nd Step: But my PSU have not On/Off button. Should I On/off UPS button at this point.

3rd Step: Pluck CMOS for 2 minutes.
4th Step: Fix CMOS in mo-bo.
5th Step: Fix PSU Cable.

Actually I am new to hardware so asking this. are you talking about these steps??.
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family
jbohaj is offline   Reply With Quote
Old 20-12-2010, 02:47 PM   #14 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,545
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Just do 3,4,5. Keep the power outlet connection remove.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is offline   Reply With Quote
Old 20-12-2010, 04:45 PM   #15 (permalink)
Never give up!!
 
jerrin_ss5's Avatar
 
Join Date: Dec 2009
Posts: 182
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Quote:
Originally Posted by jbohaj View Post
Thanks jerrin.. I'll test mo-bo with other Power Supply. But from last 2-3 years, PC is running on 450 Watt power Supply. My friend has Power Supply of 650 watts, if I test mo-bo with that (650 Watt Power Supply). Can it cause harm to mobo or to HDD??

Also please see above Post URL Link regarding Norton Ghost.

Thanks.
generally higher watts PSU won't damage ur mo-bo but make sure the PSU ur gonna use is a branded one !!!
__________________
AMD Phenom-II X4-810:| || Zotac 8200 A-E :sad:||OCZ PC2 6400 -2GB + 1GB (platinum + gold edition ):-) || Segate 250GB & WD green 500GB :||| ZOTAC GTX 460 1Gb DDR5 :grin:|| Cooler Master GX550W Bronze:||| AOC 2236VW:grin:.
jerrin_ss5 is offline   Reply With Quote
Old 27-12-2010, 07:52 PM   #16 (permalink)
Apprentice
 
Join Date: Feb 2009
Posts: 93
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks guys, your suggestions works.
Booting problems were due to faulty power supply, replaced it & all gone.
@ Jerrin: Now Champion named Power supply is running. Is it fine??.
__________________
Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family
jbohaj is offline   Reply With Quote
Old 27-12-2010, 09:03 PM   #17 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,119
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

^^ please stay away from PSU that reads: extreme, champion or super, etc. these names are used to fool the user to buy. drop that PSU & get a good one like Corsair (if your pocket deep) or FSP (for 2k & below). if you'll upgrade your PC to a better one, get Corsair or at least buy FSP Saga II 350W. its low cost & will keep your PC safe.
Sam is online now   Reply With Quote
Old 28-12-2010, 10:13 AM   #18 (permalink)
Never give up!!
 
jerrin_ss5's Avatar
 
Join Date: Dec 2009
Posts: 182
Default Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Quote:
Originally Posted by jbohaj View Post
Thanks guys, your suggestions works.
Booting problems were due to faulty power supply, replaced it & all gone.
@ Jerrin: Now Champion named Power supply is running. Is it fine??.
well never heard of such a PSU go for a branded one such as cooler master or corsair !!
__________________
AMD Phenom-II X4-810:| || Zotac 8200 A-E :sad:||OCZ PC2 6400 -2GB + 1GB (platinum + gold edition ):-) || Segate 250GB & WD green 500GB :||| ZOTAC GTX 460 1Gb DDR5 :grin:|| Cooler Master GX550W Bronze:||| AOC 2236VW:grin:.
jerrin_ss5 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
Latest Threads
- by kool
- by Sujeet
- by ax3
- by ico
- by Who

Advertisement




All times are GMT +5.5. The time now is 11:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2