Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Hardware Q&A
Register FAQ Calendar Mark Forums Read

Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections.


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 25-05-2010, 09:41 PM   #1 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default suggestions needed


hi guys,
my father is buying 2 new pcs for his office.
use - microsoft office and some other basic programmes
budget - 10k for each (proccy, mobo, ram, hard disk, cabinet+psu)

i thought about this -
Athlon II X2 250 3GHz @ 3K
Biostar A780G M2+SE @ 2.7k
Kingston Value RAM 1GB DDR2 @ 1.3k
WD 160GB @ 1.6k
cabinet + psu 300W @ 1k
total=9.6k

what do you think?
Jaskanwar Singh is online now  
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 25-05-2010, 10:00 PM   #2 (permalink)
Wise Old Owl
 
Cool Buddy's Avatar
 
Join Date: Mar 2006
Location: Milky way
Posts: 1,487
Default Re: suggestions needed

This is a good config, however it would be better to go for DDR3 RAM. And go for a 400W PSU, they don't consume more power but are safer.
Cool Buddy is offline  
Old 25-05-2010, 11:40 PM   #3 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,124
Default Re: suggestions needed

Quote:
Originally Posted by Jaskanwar Singh View Post
hi guys,
my father is buying 2 new pcs for his office.
use - microsoft office and some other basic programmes
budget - 10k for each (proccy, mobo, ram, hard disk, cabinet+psu)

i thought about this -
Athlon II X2 250 3GHz @ 3K
Biostar A780G M2+SE @ 2.7k
Kingston Value RAM 1GB DDR2 @ 1.3k
WD 160GB @ 1.6k
cabinet + psu 300W @ 1k
total=9.6k

what do you think?
Athlon II X2 250 3GHz @ 3K ---> should get cheap/ say 2.8k or so.

Biostar A780G M2+SE @ 2.7k ---> can go. or check if other manufacturers giving 740G or 760G based mobo for same pricing.

Kingston Value RAM 1GB DDR2 @ 1.3k ---> 2Gb DD2. A-Data will cost 1.9k or 2k.

WD 160GB @ 1.6k ---> 160Gb only? get 320Gb @ 1.7k

cabinet + psu 300W @ 1k ---> get slightly better 1. will cost 1.2k or so.
Sam is online now  
Old 26-05-2010, 03:37 PM   #4 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default Re: suggestions needed

@ sam
which mobo you recommend in 2.5k range
Jaskanwar Singh is online now  
Old 26-05-2010, 03:54 PM   #5 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,124
Default Re: suggestions needed

Quote:
Originally Posted by Jaskanwar Singh View Post
@ sam
which mobo you recommend in 2.5k range
here.. however its DDR3 based.
Sam is online now  
Old 26-05-2010, 04:03 PM   #6 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default Re: suggestions needed

ddr3 would then raise the cost
Jaskanwar Singh is online now  
Old 26-05-2010, 05:06 PM   #7 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,124
Default Re: suggestions needed

Quote:
Originally Posted by Jaskanwar Singh View Post
ddr3 would then raise the cost
yes, but mobo cost will come down. well, difference between DDR2 & DDR3 around 400-500 bucks only. not too bad i'll say.
Sam is online now  
Old 26-05-2010, 08:58 PM   #8 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default Re: suggestions needed

now which one of these-
Athlon II X2 250 @ 3K
Gigabyte GA-MA74GMT-S2 @ 2.7k
Transcend 1GB 1333MHz DDR3 @ 1.6k
WD 160GB @ 1.6k
cabinet + psu 300W @ 1.2k
total-10.1k

Athlon II X2 250 3GHz @ 3K
Biostar A780G M2+SE @ 2.7k
Transcend 2GB DDR2 @ 1.9k
WD 160GB @ 1.6k
cabinet + psu 300W @ 1.2k
total-10.4k
Jaskanwar Singh is online now  
Old 26-05-2010, 10:08 PM   #9 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,124
Default Re: suggestions needed

X2 250 price ok. the board should cost less. say 2.5k. 1Gb DDR3 will cost close to 1.9k maybe. also i feel 320Gb best choice now. it'll cost almost same as 160Gb.
Sam is online now  
Old 26-05-2010, 11:42 PM   #10 (permalink)
Apprentice
 
rkneo11's Avatar
 
Join Date: Sep 2004
Location: Mysore / Tirunelveli
Posts: 84
Default Re: suggestions needed

if you are not going to be using tally may i suggest you to use Ubuntu 10.04 with Firefox for browsing and OpenOffice.org instead of Office... It will run smother than windows on the above mentioned specs and will save you loads of cash too...
__________________
A day without laughter is a day wasted.-Charlie Chaplin.
rkneo11 is offline  
Old 27-05-2010, 01:14 PM   #11 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default Re: suggestions needed

Quote:
Originally Posted by Sam.Shab View Post
X2 250 price ok. the board should cost less. say 2.5k. 1Gb DDR3 will cost close to 1.9k maybe. also i feel 320Gb best choice now. it'll cost almost same as 160Gb.
so the first one is the better option???
Jaskanwar Singh is online now  
Old 27-05-2010, 01:28 PM   #12 (permalink)
Sam
will be back
 
Sam's Avatar
 
Join Date: Jan 2010
Location: Guwahati
Posts: 10,124
Default Re: suggestions needed

Quote:
Originally Posted by Jaskanwar Singh View Post
so the first one is the better option???
yes. go with first option.
Sam is online now  
Old 27-05-2010, 08:49 PM   #13 (permalink)
.
 
Jaskanwar Singh's Avatar
 
Join Date: Feb 2010
Location: Amritsar
Posts: 5,725
Default Re: suggestions needed

ok thanks
Jaskanwar Singh is online now  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Suggestions needed for power supply & cooling solution lubu Hardware Q&A 1 02-05-2010 06:39 PM
Need suggestions on buying a good cellphone.. Sid_gamer Buying Advice 34 15-04-2010 02:04 PM
Suggestions needed to buy a new DVD-Writer Yoda Hardware Q&A 10 18-03-2010 06:08 AM
Suggestions needed for purchase ajai5777 Hardware Q&A 11 12-02-2010 06:30 PM
Installing VLC in FC-6??? The Unknown Open Source 14 20-08-2007 06:39 PM

 
Latest Threads
- by trublu
- by Sujeet

Advertisement




All times are GMT +5.5. The time now is 08:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2