Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Hardware Q&A
Register FAQ Calendar Mark Forums Read

Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections.


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 21-05-2010, 11:27 AM   #1 (permalink)
Dreaming is THE art...
 
Dreamer's Avatar
 
Join Date: Mar 2006
Location: DreamWorld.
Posts: 60
Question Port forwarding on MTS MBlaze


Hi,

I have just bought MTS MBlaze in New Delhi as wired broadband was not available in my area. I tried to forward port for torrents as I had done previously for many years in my Airtel connection, but was unable to do so as the default gateway shown is 0.0.0.0, so there are no advanced options which I can tweak. After much searching, I laid my hands on a software, AUTAPF Port Forwarder, which many claim to have successfully used to forward ports on usb modems. I followed up the tutorial on the website of the developer, but to no avail. Some people have also claimed to have done it successfully by PortMapper.

Can someone please try to work it out? Or if someone has successfully forwarded ports on MTS MBlaze by any other method, or on Reliance Broadband+, Tata Photon+ (they should work the same way, isn't it?), can they please share the information?

Thanks for your efforts. Hope someone is successful, or else my money has gone down the drain
__________________
back to dreams for now...
Dreamer is offline  
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 21-05-2010, 11:48 AM   #2 (permalink)
Alpha Geek
 
Join Date: Jun 2009
Posts: 841
Default Re: Port forwarding on MTS MBlaze

I Think you need to ask your ISP (MTS) to forward the ports
Aspire is offline  
Old 21-05-2010, 12:13 PM   #3 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,547
Default Re: Port forwarding on MTS MBlaze

I have TATA Photon+ (USB), and it worked out-of-the-box for torrents. No port forwarding. The Torrent client started DL'ing, as soon as the connection went active over the network.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is online now  
Old 21-05-2010, 12:35 PM   #4 (permalink)
Dreaming is THE art...
 
Dreamer's Avatar
 
Join Date: Mar 2006
Location: DreamWorld.
Posts: 60
Default Re: Port forwarding on MTS MBlaze

Quote:
Originally Posted by asigh View Post
I have TATA Photon+ (USB), and it worked out-of-the-box for torrents. No port forwarding. The Torrent client started DL'ing, as soon as the connection went active over the network.
Does ur torrent client show that port forwarding is on? And are u able to get full speeds on well seeded torrents? If yes, then I'll have to switch to Photon+, as I'm unable to do so on MTS. I'm able to download on MTS, but unable to get good dl speeds even though the torrent is seeded pretty well.
__________________
back to dreams for now...
Dreamer is offline  
Old 21-05-2010, 02:13 PM   #5 (permalink)
Super Moderator
 
asingh's Avatar
 
Join Date: May 2008
Location: New Delhi
Posts: 5,547
Default Re: Port forwarding on MTS MBlaze

Well, I have that "green check box" at the bottom. Speeds are decent. It is weird to be honest. At times over 100kbps and then 32-34, irrespective of the seeds. But be careful, this USB connections account for UL+DL = total data. And you are charged for total data.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V
2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server
Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255

Test your spoiler tags before submitting
asingh is online now  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PORT FORWARDING for D-Link DSL-502T Router,for MTNL users ashu888ashu888 Tutorials 30 02-12-2008 02:16 AM
Due Kernel I/O error, system refuses to boot randomly gary4gar Open Source 33 04-05-2008 10:22 AM
help.about blue screens.random messages.no hibernation hippi QnA (read only) 7 05-01-2006 07:52 PM

 
Latest Threads
- by trublu
- by Sujeet

Advertisement




All times are GMT +5.5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2