| Forum |
|
|||||||
| Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
In The Zone
Join Date: Mar 2008
Posts: 246
|
I go to bios and enable system fan fail warning and saving to cmos. It gives me a continuous beep. And today when i see my pc health status cpu temp is 127.. After going on windows i had installed software speed fan 4.35 it also shows temp 3 (127 degree) while temp1 & temp2 is under 45 after successfully shutting down the pc . Pc goes off but psu & heat sink fan spins what should i do plz reply me urgent |
|
|
| Advertisements. Register and be a member of the community to get rid of them. | |
|
Advertisement
|
|
|
|
#2 (permalink) |
|
Bond, Desi Bond!
Join Date: Oct 2007
Location: Bangalore
Posts: 9,822
|
Looks like you may need to check the CPU fan. if possible apply thermal paste and reinsert CPU cooler properly.
btw, what's the config?
__________________
My first blogspace: http://desiibond.blogspot.com |
|
|
|
|
#3 (permalink) |
|
BSD init pwns System V
Join Date: Sep 2006
Location: atapi.sys as Stuxnet
Posts: 1,076
|
abey speed fan is wrong.. its not detecting the sensors well.. mera bhi 127 Deg hi dikhata hai.. but if in doubt then go to your friend's home and see whether his CPU is also running at 127 Deg according to speed fan..
__________________
My blog :- www.openenclave.wordpress.com |
|
|
|
|
#4 (permalink) |
|
In The Zone
Join Date: Mar 2008
Posts: 246
|
I had put thermal paste but that doesnt works..
intel dual core 1.6ghz (2.5 years old) gigabyte GA G31M S2L (7 months old) 1gb ram 800mhz Transcend (7 months old) i ball 400w (7 months old) ----------------------------------------- Posted again: ----------------------------------------- I had put thermal paste but that doesnt works.. intel dual core 1.6ghz (2.5 years old) gigabyte GA G31M S2L (7 months old) 1gb ram 800mhz Transcend (7 months old) i ball 400w (7 months old) Last edited by soyab0007; 03-09-2009 at 11:34 PM. Reason: Automerged Doublepost |
|
|
|
|
#5 (permalink) | |
|
Super Moderator
Join Date: May 2008
Location: New Delhi
Posts: 5,072
|
Quote:
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V 2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255 Test your spoiler tags before submitting |
|
|
|
|
|
#8 (permalink) | |
|
Super Moderator
Join Date: May 2008
Location: New Delhi
Posts: 5,072
|
Quote:
Please do not do this. This is the last fail-safe you have, to protect the chip. For sure you will burn it/short it.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V 2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255 Test your spoiler tags before submitting |
|
|
|
|
|
#10 (permalink) |
|
Super Moderator
Join Date: May 2008
Location: New Delhi
Posts: 5,072
|
could you change that huge image...to a smaller version. Cannot read it.
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V 2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255 Test your spoiler tags before submitting |
|
|
|
|
#11 (permalink) |
|
Right Off the Assembly Line
Join Date: Sep 2009
Posts: 14
|
127 degrees is wrong....its an erroneous reading speedfan is posting.
Check for other stuff....are you saying the cpu fan n psu fan spins but u dont get a display and the monitor light keeps on blinking?? @127 degrees things would be burning. Check if u have inserted the rams properly.....clean the slots with soft cotton cloth...reinsert.. |
|
|
|
|
#13 (permalink) |
|
Bond, Desi Bond!
Join Date: Oct 2007
Location: Bangalore
Posts: 9,822
|
you better apply thermal paste and insert cpu heatsink and fan properly. that should fix the problem.
__________________
My first blogspace: http://desiibond.blogspot.com |
|
|
|
|
#14 (permalink) |
|
Super Moderator
Join Date: May 2008
Location: New Delhi
Posts: 5,072
|
Can you do the two things FIRST:
1. Use RealTEMP to report your temperature. Set TJMax = 100. Post a screen shot of the temperature here, running Prime95 via RealTEMP. If you cross 100C, stop the test. But do make the screen shot first. 2. As all have been suggesting replace your HSF apply TIM. Clean the previous application with isopropyl alcohol. Then try (1).
__________________
MSI P45 Platinum(BIOS v1.7B)|Q9550[E0]@3.85Ghz@1.320V[453x8.5]MCH@1.184V|ICH@1.55V|DDR_V_Ref_A_B@1.05V|NH-D14|Corsair TWIN2X4096-8500C5(5-5-5-15)@1089Mhz@2.14V 2xHD4890[Xfire]@1000/900[MEM/GPU]|Corsair 650TX|Seagate180GB+80GB+WD1TB|SONY-DVD-R|CM690|2x120mm Scythe Ultra Kaze|DELL S2409W|APC 1100VA|Scythe Kaze Server Windows 7 Ultimate RTM - 64BIT|Catalyst 10.5 (8.14.10.0753) forced with RadeonPRO|PS3 160GB|Sony 40EX520|AC Ryan POHD Mini|APC 800VA|APC 800VA|D425KT|CM100 Elite|2TB WD|Acer D255 Test your spoiler tags before submitting |
|
|
|
|
#15 (permalink) |
|
Right Off the Assembly Line
Join Date: Sep 2009
Posts: 14
|
Temps cant be 127degrees...the chip would have been burnt off by now it if was...
@op u saying u have disabled the thermal shutdown from the bios even then ur pc shutsdown from windows?? |
|
|
|
|
#16 (permalink) |
|
Hanging, since 2004..
Join Date: Aug 2004
Location: hanging..
Posts: 3,253
|
I too get 127 deg as wrong reading, dont worry.
__________________
Digit forum without nagging ads and with new features = http://www.thinkdigit.com/forum/showthread.php?p=945285 |
|
|
|
|
#17 (permalink) |
|
Intel OCer
Join Date: Feb 2008
Location: Bangalore
Posts: 1,101
|
Do a BIOS update
__________________
My site: collegeclassroom.org intel core i7-920||eVGA x58 sli||G-skill 6GB DDR3-1600| ZOTAC GTX480||Tagan BZ700||Antec 900||Logitech G15||Razer Death Adder and Megalodon |
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|