| Forum |
|
|||||||
| Hardware Q&A Discuss basic Hardware problems, find solutions to your hardware queries which don't fit in the other sections. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
15.0 GHz
Join Date: May 2008
Location: Beside A Road
Posts: 913
|
I was facing a problem with my DVD-RW that it was not reading DVD's. Now one more problem has raised, I have Nero 9 which was provided by Digit In December 2008, till last week my writer was fine, but today when i wen't to write a DVD, only one percent completed and it showed an error "Burning Disc Failed At 16x" and "Power Calibration Error". What to do guys??? Is it the time to change the drive?
__________________
PC(Intel Core2 Duo E4500 2.2GHz + Intel D946GZis + Dynet 2GB + 1GB DDR2 + 500GB WD Caviar + 250GB WD My Passport) iPod Touch 4th Generation - 64GB |
|
|
| Advertisements. Register and be a member of the community to get rid of them. | |
|
Advertisement
|
|
|
|
#3 (permalink) |
|
15.0 GHz
Join Date: May 2008
Location: Beside A Road
Posts: 913
|
i have IDE drive which i had brought in May 2007, I have windows XP SP2
__________________
PC(Intel Core2 Duo E4500 2.2GHz + Intel D946GZis + Dynet 2GB + 1GB DDR2 + 500GB WD Caviar + 250GB WD My Passport) iPod Touch 4th Generation - 64GB |
|
|
|
|
#4 (permalink) |
|
Wise Old Owl
Join Date: May 2008
Posts: 1,587
|
Go to bios and change the dvd drive settings to DMA mode. After that go to IDE/ATAPI controller under device manager and change the settings to DMA. restart system and give it a try again
OR After changing/confirming that the dvd drive settings on the bios is on DMA, install this: http://tinyurl.com/5w7yqt and restart. See if the dvd is getting burnt. If not try on 8x. If that doesnt work try using cd burner xp. Let us know how it goes from here. |
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|