 |
21-01-2009, 04:55 PM
|
#1 (permalink)
|
|
Right Off the Assembly Line
Join Date: Jan 2009
Location: Pune
Posts: 8
|
Computer Not Booting
Me have 2.4ghz p4-processor with 845gvsr board ,
firstly me have display problem but it solved by my vendor
after recconnection system when me started comp it will start
and after some time goes in freezz condition , but now when i am
try to start it it just start with one blink of keyboard lights and
it not shows any screen on moniter , no beep sound comes frm RAM....its a any serious problm....
Please help me..............
|
|
|
|
Advertisements. Register and be a member of the community to get rid of them.
|
|
Advertisement
|
|
|
21-01-2009, 06:23 PM
|
#2 (permalink)
|
|
TechTin.com
Join Date: Jun 2005
Location: www.TechTin.com
Posts: 4,090
|
Re: Computer Not Booting
It can be any problem.. like problem with RAM or motherboard or heating problem or anything. I will suggest you to take to any local hardware repair center.
|
|
|
|
|
21-01-2009, 08:40 PM
|
#3 (permalink)
|
|
15.0 GHz
Join Date: May 2008
Location: Beside A Road
Posts: 962
|
Re: Computer Not Booting
jst try to reset u r BIOS
__________________
PC(Intel Core2 Duo E4500 2.2GHz + Intel D946GZis + Dynet 2GB + 1GB DDR2 + 500GB WD Caviar + 250GB WD My Passport)
iPod Touch 4th Generation - 64GB :D
|
|
|
|
|
21-01-2009, 09:39 PM
|
#4 (permalink)
|
|
Apprentice
Join Date: Mar 2008
Location: Mumbai
Posts: 86
|
Re: Computer Not Booting
might as well try re seating your heatsink.
could be that its not making proper contact..
__________________
Q8200 @2.8Ghz,MSI p45 plat,2*1GB transcend DDR2 ram,Xfx 8800gt, 160+640 GB storage
My lappy
Acer 5930 G
c2d p8400 2.26, 4 Gb DDR2 ram,Nvidia 9600 gt (512 - gddr3),250Gb Hdd.
*********
|
|
|
|
|
22-01-2009, 10:25 AM
|
#5 (permalink)
|
|
Right Off the Assembly Line
Join Date: Jan 2009
Location: Pune
Posts: 8
|
Re: Computer Not Booting
Quote:
Originally Posted by Varad Dilip Choudhari
jst try to reset u r BIOS
|
thax varad but how to reset my systems BIOS , and it is not a problem with CMOS Battery?? , Please Tell Me How much Cost To Be For Reset BIOS.
|
|
|
|
|
22-01-2009, 10:40 AM
|
#6 (permalink)
|
|
Wise Old Owl
Join Date: May 2008
Posts: 1,726
|
Re: Computer Not Booting
^^ What cost  .
Switch off the system completly and pres the power button 3-4 times to drain any power on the system. Then remove the cmos battery are around 5 minutes, plug it back in and then power it on.
Once you manage to get the system up, google for orthos and download the software. run blend test for 3-4 hours and let us know if the blend test gives any error, freezes or restart the system. Do the following and let us know so we can continue further if required.
|
|
|
|
22-01-2009, 04:51 PM
|
#7 (permalink)
|
|
Right Off the Assembly Line
Join Date: Jan 2009
Location: Pune
Posts: 8
|
Re: Computer Not Booting
thanx
if I Remove CMOS Battery It Lose Its Contain i.e.Setting , then how to gt it.... when i place it again and (google for orthos and download the software) which soft...(run blend test what is its meaning me not getting that one.....) Please help me....
please reply ...
|
|
|
|
|
23-01-2009, 08:01 AM
|
#8 (permalink)
|
|
Fast 'N' Furious
Join Date: Jul 2006
Location: Geek's Heaven
Posts: 11,135
|
Re: Computer Not Booting
When you place the cmos battery again the bios will loads it's default settings automatically.
But you have to enter the current date, 1st boot device setting maually.
Take out your Ram sticks. Remove the CMOS Battery. Re-insert the CMOS battery after 5 or 10 minutes. Reinsert your ram sticks firmly. Your system should boot.
Orthos stress or blending test will test your system ( mainly CPU and Ram ) for stability.
|
|
|
|
|
24-01-2009, 11:00 AM
|
#9 (permalink)
|
|
Right Off the Assembly Line
Join Date: Jan 2009
Location: Pune
Posts: 8
|
Re: Computer Not Booting
Hello Dear ,
I Was Done As U Said , I remove CMOS Battery And Re-insert it But When I Start Comp. Again Same Prob. Occur Heatsinkfan of processor and SMPS Fan Run Normally without any screen on monitor(just like monitor is off), but green light of moniter blink continuosly,i was kept system run for upto half hr. to see that whether it is restarted automatically but it not restated...... my moniter is ok when i was unplugged it show me msg like 'no singnal' i.e.it is ok whats the prob. please help me .......
reply fast dear me wating....plz help guys....
Hi Guys Plz Help Me...............................
Plz.................  For My - Comp Not Booting Prob
Last edited by sagarkolhe777; 24-01-2009 at 03:56 PM.
Reason: Automerged Doublepost
|
|
|
|
|
25-01-2009, 05:40 AM
|
#10 (permalink)
|
|
Fast 'N' Furious
Join Date: Jul 2006
Location: Geek's Heaven
Posts: 11,135
|
Re: Computer Not Booting
Have you remove the ram sticks & reinsert them properly. Dpo these :
1. Remove Ram stick from each slot.
2. Reinsert the ram sticks again firmly. ( if you have only try inserting it in different slot )
3. Try with another Ram stick.
BTW, How much ram do you have installed in your system.
Quote the capacity of every single stick of Ram.
|
|
|
|
|
26-01-2009, 02:24 PM
|
#11 (permalink)
|
|
Right Off the Assembly Line
Join Date: Jan 2009
Location: Pune
Posts: 8
|
Re: Computer Not Booting
In My System Only One RAM (Dynet D333) Is Installed,its of a 256MB And I Inserted it in another slot ,
by 2-3 times i insert RAM in different Slot ... But Yet System Not Started...
due Can be another problem... i was put thermal paste bet heatsink and cpu so there is no problem of heating..... i asked to another vendor it says it is a problem with KBC(key boared controller) but when cpu started keyboared light blink and off .
whats the problem..... plz reply...
|
|
|
|
|
26-01-2009, 08:53 PM
|
#12 (permalink)
|
|
Fast 'N' Furious
Join Date: Jul 2006
Location: Geek's Heaven
Posts: 11,135
|
Re: Computer Not Booting
Can you try with another ram module ?
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
