Motherboard or processor

soyab0007 · 10-11-2008, 10:34 PM

when i power on pc.
with just ram, power supply, processor and motherboard attach.intel bios screen comes and after it crash, different screen comes like white or mix color.
and sometimes no screen comes.when i attach harddisk sometime it loads into windows and get crashed what should i do.i had done bios update successfully.but still not working. Harddisk and ram i had check to the nearest service shop it works properly.
Whether a motherboard or Processor problem what should i do.....

RMN · 10-11-2008, 10:49 PM

the prob could be with your PSU too....try getting that checked.

soyab0007 · 11-11-2008, 10:55 AM

when i on Pc after intel screen i get different screen (see attachment). Ram and harddisk working properly. And not able to switch off manually i have to off directly with switch. please give me some suggestions

soyab0007 · 12-11-2008, 04:45 PM

Please suggest me what should i do

jit_devil2 · 13-11-2008, 11:57 PM

try starting it in safe mode...................(press f5 or f6......when bios loads)if it starts..............dere shudnt be a hardware prob........juz reload your os

realdan · 14-11-2008, 12:36 AM

i assume you are using integrated graphics
oh wait!
it would do a great deal of good to those who wanted to help if you would at least specificy what config u have..
general terms like ram, processor, motherboard...nobody know what exactly your model is?

jit_devil2 · 14-11-2008, 01:10 AM

my theory is dat if ur hdd iz fyn whn dey test it dey test da data via da os in their machine..............................not wid da 1 on ur hdd................did dey try n boot up wid ur hdd's os?????????????????????????

ancientrites · 14-11-2008, 01:28 AM

in my opinion the the sata cable(i dont know what others call it)the thin cable joining the sata hdd and mobo is loose or else it could be RAM problem.you did say ram and hdd is working now try to get a new sata cable and check if your pc hangs or not.
i had similar problem in 2006 and found out that joining of sata cables on each ends was loose.it was particularly loose on sata hdd.

RMN · 14-11-2008, 07:04 AM

yeah make sure the the power cables connected are tight enough....mainly the one connected to your GFX card....a faulty converter of my GFX card gave me red and green patches at BIOS and crashed.

best of luck!

soyab0007 · 14-11-2008, 10:43 AM

Harddisk, ram and power supply working fine and not able to boot in safe mode what should i do

squid · 14-11-2008, 10:48 AM

this problem may also due to failure of L1 or L2 cache on your processor. You can try memtest86+ to find any fault in memory. you can download it in http://www.memtest.org/

ancientrites · 14-11-2008, 11:17 AM

Quote:

Originally Posted by soyab0007

Harddisk, ram and power supply working fine and not able to boot in safe mode what should i do

dude.... did you understand what RMN and myself said.

soyab0007 · 14-11-2008, 06:29 PM

I had connected only ram, power supply and motherboard. And again it give me red and green crash screen.
And power supply chord has been plugged properly.

I had downloaded the memtest 86 V2.01 bootable file now what should i do.

squid · 14-11-2008, 06:54 PM

Before doing a memory test goto BIOS and disable both L1 & L2 Cache. Then Boot the system. If the system boots normally then the fault is with processor cache memory.
You can burn the ISO image of memtest onto the disk and boot from this disk.

ancientrites · 14-11-2008, 08:40 PM

Quote:

Originally Posted by soyab0007

I had connected only ram, power supply and motherboard. And again it give me red and green crash screen.
And power supply chord has been plugged properly.

I had downloaded the memtest 86 V2.01 bootable file now what should i do.

oh god i dont know why is it so difficult for you to understand.i am not talking about power supply chord but i am talking about sata cable have a look at the below

get the new one and then see if you system hangs or defreezes.