Forum     

Go Back   Digit Technology Discussion Forum > Hardware > Graphic cards
Register FAQ Calendar Mark Forums Read

Graphic cards News, discussions, queries and problems related to Graphic cards.

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 05-01-2006, 07:19 PM   #1 (permalink)
Broken In
 
gauravnawani's Avatar
 
Join Date: Sep 2004
Location: Bangalore, India
Posts: 154
Default Nvidia 6600 having trouble during game runs

Hi,

I just bought the Nv6600, the problem is during the game run like the demo of quake4 it runs fine uptill the interface but as soon as you hit start after a few seconds of loading the computer shutsdown abruptly.

I am of the opinion that this has more to do with the SMPS power supply, does any one know whats the minimum requirement for it. Currently I have 300W.

Will replacing the SMPS with upto 350W will suffice?? I faintly recall reading some where that the minimum was 400w is this true. More importantly will replacing the SMPS will have any ill effects on the other hardware component, (I think the answer is no but just want to be sure) I have older Km400Mother Board with Sempron 2500, two HDD 40+80, Sony DVD-Rw and one CDROM drive.

One more query for the nerds does higher power supply means that when I am playing games I am consuming lots of power (electricity), any ideas how does this compares to NV5200
gauravnawani is offline  
Advertisements. Register and be a member of the community to get rid of them.
Advertisement

Old 05-01-2006, 11:18 PM   #2 (permalink)
I draw every day
 
yash's Avatar
 
Join Date: Feb 2005
Location: oakville
Posts: 554
Default

i also need to know about a similar error that i have, my pc used to just restart before even the windows boot screen showed up.then i disconnected one of my cdrom drives and now, occasionally it starts successfully.other times ,the light on my monitor goes orange instead of green.like its in standby or shut down.i have the same config as gaurav
__________________
Kisne roba mera tobat.
yash is offline  
Old 06-01-2006, 02:02 AM   #3 (permalink)
No pain....No gain
 
john_the_ultimate's Avatar
 
Join Date: May 2005
Location: Kolkata
Posts: 1,198
Default

Minimum for 6600 as recommended by NVIDIA is 300W SMPS. So to be on a safer side go for a good brand such as ANTEC,POWERSAFE, VIP of 400-450W.
Power consumption of 6600 is certainly higher than 5200.
To calculate ur approximate power consumption see this: http://www.jscustompcs.com/power_supply/
__________________
---------------------------------------------------
Faith is the boast of a man who is too lazy to investigate.
---------------------------------------------------
john_the_ultimate is offline  
Old 06-01-2006, 06:42 AM   #4 (permalink)
Broken In
 
gauravnawani's Avatar
 
Join Date: Sep 2004
Location: Bangalore, India
Posts: 154
Default

Thanks John, consumption for my computer was around 290, but only problem there was that there was no graphics card selection there for 6600. So I have to get one new SMPS.
__________________
----------------------------------------------------
Blender India forums
http://www.bestfreeforums.com/forums/blenderindia.html
gauravnawani is offline  
Old 06-01-2006, 11:21 AM   #5 (permalink)
No pain....No gain
 
john_the_ultimate's Avatar
 
Join Date: May 2005
Location: Kolkata
Posts: 1,198
Default

U are welcome and do get a SMPS of a reputed brand.
__________________
---------------------------------------------------
Faith is the boast of a man who is too lazy to investigate.
---------------------------------------------------
john_the_ultimate is offline  
Old 06-01-2006, 11:27 PM   #6 (permalink)
In The Zone
 
jay4u's Avatar
 
Join Date: Mar 2005
Location: Mumbai
Posts: 319
Default

i would sugest a powersafe 400 watt for budgeted option and antec for the extremesssss....
__________________
Passwords are like underwear... Change them often...
jay4u is offline  
Old 06-01-2006, 11:48 PM   #7 (permalink)
In The Zone
 
Join Date: Jul 2005
Location: Hyderabad
Posts: 231
Default

@gauravnawani
What is the temperature of ur graphic card(thats after like 1hr of hight graphic game play?????i have a XFX 6600 256mb and i recorded the temp of the graph9ic card using Riva tuner,,, when i start the computer the initial temperature is around 45c but after few hrs of game play it rises to 78-82c is it normal to have such temperatures???? or is riva tuner giving me wrong readings???or will i have to exchange the graphic card for a new 1 or get a fan for it(my card did not come with a fan it came only with a heatsink) or are there ne other softwares that i should try to record the temperatures at present i am using Riva tuner v2.0 RC 15.8
__________________
fighting for peace is like ****ing for virginity
cryptid is offline  
Old 07-01-2006, 01:37 AM   #8 (permalink)
No pain....No gain
 
john_the_ultimate's Avatar
 
Join Date: May 2005
Location: Kolkata
Posts: 1,198
Default

The temperature at max load (78-82C) seems to be a bit high but as it fanless see that proper ventilation is provided for ur components. I have a leadtek 6600gt pci-e and it never goes beyond 50C at max load. Install the latest forceware 81.98 driver, it has in-built temperature reading option. Download it from here: http://www.nvidia.com/object/winxp_2k_81.98.html . I am using it and its fine.
__________________
---------------------------------------------------
Faith is the boast of a man who is too lazy to investigate.
---------------------------------------------------
john_the_ultimate is offline  
Old 07-01-2006, 02:18 AM   #9 (permalink)
Broken In
 
gauravnawani's Avatar
 
Join Date: Sep 2004
Location: Bangalore, India
Posts: 154
Default

You guys will find it bit wierd but the problem that I had was not exactly the power shortage but actualy I had not properly installed the heatsink of the processor, there was a little gap I acidently looked upon the after (abrupt shutdown) remperature of the Processor at bios on next boot and realised it, anyway I did installed a 400watt smps none the less.

Cryptid I have Leadtek 6600 AGP with fan, I haven't checkd the temprature of it after heavy work but it starts from 38C.

78-82 is near burning you should consider some seperate fan attachment. May be you can attach some old CPU fans over the heatsink as a replacement for the actual fan, you will have additional system fan plugs on MOBO. I have done that with my older 5200 without any problems, yeah it wont be that effecient but atlease it might reduce the temprature to 10-15 degrees'
__________________
----------------------------------------------------
Blender India forums
http://www.bestfreeforums.com/forums/blenderindia.html
gauravnawani is offline  
Old 09-01-2006, 02:33 PM   #10 (permalink)
I draw every day
 
yash's Avatar
 
Join Date: Feb 2005
Location: oakville
Posts: 554
Default

i finally got a compatible navtech smps of 450watts fo 950 here in akola today.still have to wait to test it though...no electricity till 4 pm...
__________________
Kisne roba mera tobat.
yash is offline  
Old 19-02-2006, 05:23 PM   #11 (permalink)
I draw every day
 
yash's Avatar
 
Join Date: Feb 2005
Location: oakville
Posts: 554
Default

hey guys I just found out(my cousin told me) that the ups`es that we have dont output power above 250 watts or something...so getting a newer smps wont make a difference if u`re using the same ups. is it true? because I tested my graphics card on two other pc`s and there also its giving the same kind of problem
__________________
Kisne roba mera tobat.
yash is offline  
Old 19-02-2006, 09:54 PM   #12 (permalink)
Learner
 
Kniwor's Avatar
 
Join Date: Sep 2005
Location: Chicago
Posts: 1,946
Default

Bull-****, I have run 2-3 PC's on a single UPS at some time when i got the college comp room electricity messed up......
Kniwor is offline  
Old 21-02-2006, 11:11 PM   #13 (permalink)
I draw every day
 
yash's Avatar
 
Join Date: Feb 2005
Location: oakville
Posts: 554
Default

ok he also realised that was stupid...and hey the graphics card is still having problems running normally. it hangs aafter a little while on the windows desktop. novatech 450watts is also not helping me here.
__________________
Kisne roba mera tobat.
yash is offline  
Old 22-02-2006, 08:27 AM   #14 (permalink)
Wise Old Owl
 
Join Date: Dec 2004
Location: South Side Crater, Mars
Posts: 1,038
Default

i have installed Riva tuner but iam unable to find any temp/sensor tab or button...whrere the hell is it ???
grinning_devil is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +5.5. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.

Search Engine Optimization by vBSEO 3.3.2