How-to configure a PPPoE Broadband Internet Connection in OpenSuSE 11.0

[NucleusKore]

Hi everyone,
I have written a tutorial for BSNL and Airtel users in India to configure their PPPoE broadband connections in bridging mode (like you use a dial-up connection in Windows). This should work for users of other broadband providers in India and abroad who use the same protocol. If you are using an "unlimited" broadband internet plan this tutorial is not for you. You are better off configuring your internet directly from your router (routing mode) - router on internet on, router off internet off.

Now let's get cracking........

1. Press Alt and F2
Type yast (yast2 for GNOME users) and press ENTER

http://img146.imageshack.us/img146/7006/pppoe1vt9.th.png (http://img146.imageshack.us/my.php?image=pppoe1vt9.png) http://img127.imageshack.us/img127/3585/g1cn6.th.png (http://img127.imageshack.us/my.php?image=g1cn6.png)

Key in your root password and press ENTER
You will then get the YaST2 control panel

http://img365.imageshack.us/img365/8913/pppoe2dc1.th.png (http://img365.imageshack.us/my.php?image=pppoe2dc1.png) http://img127.imageshack.us/img127/9492/g2kt5.th.png (http://img127.imageshack.us/my.php?image=g2kt5.png)

2. Click on Network devices on the left

http://img134.imageshack.us/img134/811/pppoe20sm8.th.png (http://img134.imageshack.us/my.php?image=pppoe20sm8.png)

Click on Network Settings in the right pane. The Network Settings panel will open

http://img183.imageshack.us/img183/1461/pppoe21gi2.th.png (http://img183.imageshack.us/my.php?image=pppoe21gi2.png) http://img395.imageshack.us/img395/6786/g3oc6.th.png (http://img395.imageshack.us/my.php?image=g3oc6.png)

Normally you will have just one card which you can configure by selecting it, clicking edit and going to Step 3.

But if you have more than one like I do, three in my case, it becomes tricky. As you can see above, eth0 is configured with DHCP, and the others are not configured. So how do I know whether SuSE has detected the right card? I press Alt and F2, type konsole (or gnome-terminal in GNOME) and press ENTER, then type su and press ENTER, give my root password and become root as shown below

http://img183.imageshack.us/img183/9776/pppoe22nm7.th.png (http://img183.imageshack.us/my.php?image=pppoe22nm7.png) http://img134.imageshack.us/img134/8142/pppoe23yv0.th.png (http://img134.imageshack.us/my.php?image=pppoe23yv0.png)

Then at the # prompt type ifconfig and press ENTER
You will get an output like this

http://img183.imageshack.us/img183/6121/pppoe24ec6.th.png (http://img183.imageshack.us/my.php?image=pppoe24ec6.png) http://img127.imageshack.us/img127/4407/g4ad4.th.png (http://img127.imageshack.us/my.php?image=g4ad4.png)

Note that eth0 has got no ip address, where as eth1 (which is not configured according to yast above) has an ip 192.168.1.2
Also note the hardware address (HWAddr) of eth1 (or whichever it is in your pc)

[NucleusKore]

3. Now go to the Network Settings window and select the correct card matching the hardware address you noted above and click edit, and configure with dynamic ip->DHCP as shown below

http://img238.imageshack.us/img238/2671/pppoe25hf2.th.png (http://img238.imageshack.us/my.php?image=pppoe25hf2.png) http://img134.imageshack.us/img134/6595/pppoe26vl9.th.png (http://img134.imageshack.us/my.php?image=pppoe26vl9.png) http://img184.imageshack.us/img184/4121/g5or3.th.png (http://img184.imageshack.us/my.php?image=g5or3.png)

Click next and then click Finish

http://img183.imageshack.us/img183/2479/pppoe27hn9.th.png (http://img183.imageshack.us/my.php?image=pppoe27hn9.png) http://img134.imageshack.us/img134/3250/pppoe28kn6.th.png (http://img134.imageshack.us/my.php?image=pppoe28kn6.png) http://img127.imageshack.us/img127/93/g6et9.th.png (http://img127.imageshack.us/my.php?image=g6et9.png)

4. Now in YaST, click on Network devices on the left

http://img238.imageshack.us/img238/6619/pppoe3gy9.th.png (http://img238.imageshack.us/my.php?image=pppoe3gy9.png) http://img127.imageshack.us/img127/9734/g7gl9.th.png (http://img127.imageshack.us/my.php?image=g7gl9.png)

Click on DSL

http://img397.imageshack.us/img397/8359/pppoe4ec0.th.png (http://img397.imageshack.us/my.php?image=pppoe4ec0.png) http://img213.imageshack.us/img213/2120/g8th0.th.png (http://img213.imageshack.us/my.php?image=g8th0.png)

5. Click on Add. If you already have something in that window, select it, click delete, and then click on Add

http://img261.imageshack.us/img261/1410/pppoe5vl5.th.png (http://img261.imageshack.us/my.php?image=pppoe5vl5.png) http://img395.imageshack.us/img395/8966/g9dh0.th.png (http://img395.imageshack.us/my.php?image=g9dh0.png)

You will see the DSL configuration window. Now both BSNL and Airtel use PPPoE, so select everything as shown in the picture below. Note that the PPP Mode-dependent settings are greyed out as they are already fed in your router/modem.

http://img516.imageshack.us/img516/7178/pppoe6wc3.th.png (http://img516.imageshack.us/my.php?image=pppoe6wc3.png) http://img184.imageshack.us/img184/2541/g10fd6.th.png (http://img184.imageshack.us/my.php?image=g10fd6.png)

Very important: Make sure that "Enable Device Control for Non-root User via KInternet" is checked as shown..

In case you have more than one lan card click on configure network cards and select the correct card
http://img365.imageshack.us/img365/3313/g11ut1.th.png (http://img365.imageshack.us/my.php?image=g11ut1.png)

Click Next

[NucleusKore]

6. You will now get an error message, dismiss this and click Custom Providers

http://img397.imageshack.us/img397/6333/pppoe7bd0.th.png (http://img397.imageshack.us/my.php?image=pppoe7bd0.png) http://img187.imageshack.us/img187/6107/g12ru3.th.png (http://img187.imageshack.us/my.php?image=g12ru3.png)

Type the Provider name as Airtel or BSNL (donkey or monkey will also do as long as you know it's your ISP)
Type in the user name and password

http://img397.imageshack.us/img397/2198/pppoe8wv1.th.png (http://img397.imageshack.us/my.php?image=pppoe8wv1.png) http://img76.imageshack.us/img76/4199/pppoe9by0.th.png (http://img76.imageshack.us/my.php?image=pppoe9by0.png)

7. Set Connection Parameters as shown below

http://img146.imageshack.us/img146/5050/pppoe10tg8.th.png (http://img146.imageshack.us/my.php?image=pppoe10tg8.png) http://img365.imageshack.us/img365/3381/g13pz0.th.png (http://img365.imageshack.us/my.php?image=g13pz0.png)

Now this is what you'll finally get, click finish

http://img373.imageshack.us/img373/3494/pppoe11dc6.th.png (http://img373.imageshack.us/my.php?image=pppoe11dc6.png) http://img187.imageshack.us/img187/9695/g14rc3.th.png (http://img187.imageshack.us/my.php?image=g14rc3.png)

GNOME users will get this message

http://img511.imageshack.us/img511/6462/g15ao1.th.png (http://img511.imageshack.us/my.php?image=g15ao1.png)

Pop in your OpenSuSE 11.0 DVD and click ok and install kinternet via yast->software management, then go to the next step.

8. Press Alt and F2
Type kinternet and press ENTER

http://img373.imageshack.us/img373/9620/pppoe12kz0.th.png (http://img373.imageshack.us/my.php?image=pppoe12kz0.png)

You will see the following error message

http://img516.imageshack.us/img516/5044/pppoe13sp2.th.png (http://img516.imageshack.us/my.php?image=pppoe13sp2.png)

Click OK

9. Now go to YaST as before, and Click on System (in the left pane) and System Services in the right pane; this is what you will get

http://img516.imageshack.us/img516/6369/pppoe14vu9.th.png (http://img516.imageshack.us/my.php?image=pppoe14vu9.png)

Look for and click on smpppd as shown. Observe that the enabled column will be marked as No. Click on the Enable button below. This is the message you should get

http://img373.imageshack.us/img373/5379/pppoe15wv5.th.png (http://img373.imageshack.us/my.php?image=pppoe15wv5.png)

Click OK and close all the panels.

10. Now press Alt and F2, and type kinternet and press enter. You may get this message.

http://img516.imageshack.us/img516/8034/pppoe16ay1.th.png (http://img516.imageshack.us/my.php?image=pppoe16ay1.png)

[NucleusKore]

Click OK, right click on kinternet near the clock and quit. Then press Alt and F2, type kinternet and press enter. You will see it in your system tray again. Right click on it and select dial-in

http://img261.imageshack.us/img261/8499/pppoe19jd1.th.png (http://img261.imageshack.us/my.php?image=pppoe19jd1.png)

Enjoy your broadband internet !!! To disconnect, right click on the kinternet icon in your system try and select hang-up

http://img341.imageshack.us/img341/6697/pppoe18sy7.th.png (http://img341.imageshack.us/my.php?image=pppoe18sy7.png)

What if I have used Gnome live cd to install ?
Hmmm I did not think of that. A user asked me :p Anyway, download this package

http://www.mediafire.com/?ofwogjuhtyy

Extract the contents to a folder, say kinternet, in your home directory

Press Alt and F2, type gnome-terminal, and press enter

type
cd kinternet
and press ENTER to go to that folder

Type
su
and press ENTER
key in your root password
and press ENTER

Now type
rpm -ihv *
and press ENTER

KInternet will be installed to your system. Restart your PC and then continue with the next step of this tutorial above.

[rohan_shenoy]

Very good NucleusKore. I really appreciate that you really put efforts to spread FOSS by writing such tutorials.

And to other fanboys, please try to put some efforts on similar lines instead of simply pulling news from linux blogs and starting a new thread in the news section or defecating every thread with words like 'Winblows' or 'M$haft' or 'Ballmar sux', etc.

No matter whether you propagate Windows, Linux, Mac or any other OS, be an asset, not a a$$hole to this forum.

[NucleusKore]

Thanks Rohan

[rahimveron]

Thanks a lot NukleusKore :)

Now as I am on BSNL 1350 Unlimited Plan , how should i go about configuring in the modem itself as suggested by you in the post.

[hellknight]

hey thanx dude, i'm about to install openSUSE 11 tomorrow.. its almost 90% downloaded

[NucleusKore]

Welcome

[Ecko]

Someproblem here
I've a net connection with BSNL that's always on
How to configure that so that i can change(enable) them whenever I require

Gr8 Tutorial BTW :)

[New]

Good tut..Thanks..

[NucleusKore]

Someproblem here
I've a net connection with BSNL that's always on
How to configure that so that i can change(enable) them whenever I require

Gr8 Tutorial BTW :)

Thanks

I really do not understand your query
Please tell me
1) Which broadband plan are you on
2) How are you billed for usage - for the amount of data you use or is it unlimited
3) In Windows, how do you connect to the internet, through a dialer, or by just switching on your router?

[praka123]

well ,@ ecko : you have to enable dhcp using yast for router connection.

@doc :he meant router dialer :p

[Ecko]

Thanks

I really do not understand your query
Please tell me
1) Which broadband plan are you on
2) How are you billed for usage - for the amount of data you use or is it unlimited
3) In Windows, how do you connect to the internet, through a dialer, or by just switching on your router?
I've 2 connections
BSNL & Connect
I've just to Enable/Disable the LAN connection in my windows for switching b/w 2
Connect is started(connected) enabling LAN conncection(no dialing) & its unlimited
BSNL u know well

I've 2 modems & 2 LAN cards 4 it

[NucleusKore]

You have to use the network manager applet, enable it from YaST->Network Devices->Network Settings

http://img70.imageshack.us/img70/1372/net1hl6.th.png (http://img70.imageshack.us/my.php?image=net1hl6.png)

Click Global Options Tab

http://img127.imageshack.us/img127/2125/net2jq2.th.png (http://img127.imageshack.us/my.php?image=net2jq2.png)

Click User controlled with Network Manager
Click Finish

[hellknight]

Hey that method is working but the connection gets disconnected in between.. this didn't happened on Ubuntu.. I don't wanna wake up in the morning and see that the download is still unfinished due to disconnection.. what should i do to resolve it.. I've BSNL unlimited plan..

[topgear]

@ NucleusKore
Great Tutorial, Thanks a lot.

[Pat]

Hey that method is working but the connection gets disconnected in between.. this didn't happened on Ubuntu.. I don't wanna wake up in the morning and see that the download is still unfinished due to disconnection.. what should i do to resolve it.. I've BSNL unlimited plan..

You may need to set timeout to 0 for the connection!

[hellknight]

@ Pat
Thanx dude, you made my day.. I was silly enough to miss that option..

Yaar that method is not working too.. it gets disconnected in between..could you suggest me some other way..

[NucleusKore]

Gnome live CD users see the end of the tutorial for more information on installing kinternet.

[hellknight]

Hey nucleus buddy..
The problem is that the browsing stops but the torrents and downloads, they work yaar.. I even edited the /etc/resolv.conf file and pasted the DNS address there.. but still now success and then I even tried to set the timer to 0 but no success.. Help me out yaar.. I don't wanna re-install ubuntu again..

[NucleusKore]

Hey nucleus buddy..
The problem is that the browsing stops but the torrents and downloads, they work yaar.. I even edited the /etc/resolv.conf file and pasted the DNS address there.. but still now success and then I even tried to set the timer to 0 but no success.. Help me out yaar.. I don't wanna re-install ubuntu again..

If the torrents and downloads work and browsing doesn't it's probably just a bandwidth issue. In any case, just try this, go to YaST->Network Devices->Network settings
Click on Hostname/DNS tab

And enter the following DNS numbers

208.67.222.222
208.67.220.220

as Nameserver 2 and Nameserver 3

Make sure that the Routing tab contains the IP of your modem/router, which is usually 192.168.1.1
Click on Global options and ensure that Enable IPv6 is not checked.
Click Finish

[praka123]

^if you have iptables already configured before ,you may like to allow those DNS entries to communicate :) else it will stand still.
iptables -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 208.67.222.222 --sport 53 -d 0/0 -j ACCEPT
iptables -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 208.67.220.220 --sport 53 -d 0/0 -j ACCEPT

^from lokkit entry of ubuntu.

[NucleusKore]

^if you have iptables already configured before ,you may like to allow those DNS entries to communicate :) else it will stand still.
iptables -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 208.67.222.222 --sport 53 -d 0/0 -j ACCEPT
iptables -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 208.67.220.220 --sport 53 -d 0/0 -j ACCEPT

^from lokkit entry of ubuntu.

Ty Praka, but if I am not mistaken, SuSE automatically adjusts it each time you save your network configuration, see this

http://img59.imageshack.us/img59/1774/f2vo0.th.png (http://img59.imageshack.us/my.php?image=f2vo0.png)

[a_k_s_h_a_y]

hey in DSL Router page, that is 192.168.1.1 DHCP is disabled. How should i then fix it...???

should i enable DHCP now ?? see screen shot... and then will your method work ??
http://img33.picoodle.com/data/img33/3/9/19/t_hellm_cda37ed.jpg (http://www.picoodle.com/view.php?img=/3/9/19/f_hellm_cda37ed.jpg&srv=img33)

i wanted to configure an always on connection like in windows/ubuntu..

[NucleusKore]

hey in DSL Router page, that is 192.168.1.1 DHCP is disabled. How should i then fix it...???

Select Enable
Start IP address 192.168.1.2
End IP address 192.168.1.x
where x is any number from 3 to 254

[a_k_s_h_a_y]

yeah done. working. thanks.
but i am having other probs.. damn man... !! the windows don't move smoothly !! installed gfx drivers through zypper..! through yast2 it fails..

[NucleusKore]

yeah done. working. thanks.
but i am having other probs.. damn man... !! the windows don't move smoothly !! installed gfx drivers through zypper..! through yast2 it fails..

Make a new post in the relevant section (Open Source), giving a detailed description. I cannot answer you here