PDA

View Full Version : converting from IDE to SATA/RAID controller

blackleopard92
14-06-2006, 09:15 AM
I had a SATA drive and bought another SATA one recently.
I connect the drive with the other free SATA port.

However, WindowsXP didn't recognise the drive.ON inspection I found that the assembler had configured the controller as IDE controller, not SATA/RAID controller.

However, before choosing SATA controller, I wanted to ask whether would it format my HD's or would my data be lost.

I have to convert to SATA controller, and a answer would help me find judge the amount of backup I would have to make.
janitha
15-06-2006, 09:20 PM
I had a SATA drive and bought another SATA one recently.
I connect the drive with the other free SATA port.

However, WindowsXP didn't recognise the drive.ON inspection I found that the assembler had configured the controller as IDE controller, not SATA/RAID controller.

However, before choosing SATA controller, I wanted to ask whether would it format my HD's or would my data be lost.

I have to convert to SATA controller, and a answer would help me find judge the amount of backup I would have to make.

You have not given the system specifications especially the Mobo. From what you have written, it seems you are already using one SATA disk.

So from what you have written, the problem is not clear.
blackleopard92
17-06-2006, 07:04 PM
You have not given the system specifications especially the Mobo. From what you have written, it seems you are already using one SATA disk.

So from what you have written, the problem is not clear.
Sorry,
I have MSI RS480 motherboard.ANd I am using one SATA disk, but the assembler had it on a IDE controller.
deathvirus_me
17-06-2006, 08:24 PM
Well .. just go to the bios and enable the second SATA port ... well .. u can't really configure anything as only IDE or anything ... ur mobo should do it automatically .... just make sure the particular channel ur connecting to has detection enabled from the bios (like i've PATA 3,4 and SATA 3,4 disabled coz i don't use them) ...
janitha
17-06-2006, 10:06 PM
So you are going to use only two SATA disks. I feel you just need to enable SATA in the Bios.
blackleopard92
18-06-2006, 02:28 PM
wouldn't it do anything to my data?
janitha
18-06-2006, 08:12 PM
If you are using a SATA disk and it is working, it should be working as SATA.
From what I understand from your post is that you mean that it is listed in the device manager under "IDE ATA/ATAPI controllers", which I think is normal even in case of SATA.
blackleopard92
19-06-2006, 09:21 AM
If you are using a SATA disk and it is working, it should be working as SATA.
From what I understand from your post is that you mean that it is listed in the device manager under "IDE ATA/ATAPI controllers", which I think is normal even in case of SATA.
True
but XP doesn't allow me to use disk space of the second SATA disk, even though it detects it.