** Post all your BSNL Dataone Related Queries Here **

[mohit]

Can somebody tell me how can I have BSNL connected as "Always On" ? I want it such that whenever I start my PC, BSNL should be connected already and I dont have to connect it manually. I just want that as soon as the PC loads windows, I can surf instantly. Is this possible ? I heard it was. Someone knowing how to do it, please post here.

Thanks.

[Help~Is~Here]

Can somebody tell me how can I have BSNL connected as "Always On" ? I want it such that whenever I start my PC, BSNL should be connected already and I dont have to connect it manually. I just want that as soon as the PC loads windows, I can surf instantly. Is this possible ? I heard it was. Someone knowing how to do it, please post here.

Thanks.

You can do that by setting up the modem to connect automatically by itself rather than you needing to click on the connection icon to connect. Please let me know the model no. of the modem you have so that I can give you the appropiate instructions.

[mohit]

You can do that by setting up the modem to connect automatically by itself rather than you needing to click on the connection icon to connect. Please let me know the model no. of the modem you have so that I can give you the appropiate instructions.

I am having Huwawei MT882.

[s18000rpm]

Can somebody tell me how can I have BSNL connected as "Always On" ? I want it such that whenever I start my PC, BSNL should be connected already and I dont have to connect it manually. I just want that as soon as the PC loads windows, I can surf instantly. Is this possible ? I heard it was. Someone knowing how to do it, please post here.

Thanks.

Open the Modem setting page by clicking here-> http://192.168.1.1/ & do as instructed in the pic.
http://s2.supload.com/thumbs/default/bc.JPG (http://s2.supload.com/free/bc.JPG/view/)

[mohit]

^^Not opening for me. How do you open it ?

[janitha]

^^Not opening for me. How do you open it ?
Same with me!

[s18000rpm]

ok forgot,:)) it might differ for other models.

read the DataOne Manual book, it wud be given there on how to access modem setting page.

try to open (copy paste it in adrrs. bar) in Internet Explorer.

http://192.168.1.1/

[janitha]

ok forgot,:)) it might differ for other models.

read the DataOne Manual book, it wud be given there on how to access modem setting page.

try to open (copy paste it in adrrs. bar) in Internet Explorer.

http://192.168.1.1/

Tried IE also with same result.

[gary4gar]

^^Not opening for me. How do you open it ?



Go start>control panel>network connection> local area connection>open properies>select TCP/IP>click properies

and set it as shown
http://img339.imageshack.us/img339/7818/defaultgatewaynm7.jpg

[cyber_ral]

how does one configure bsnl dataone on mandriva linux 2007??

[praka123]

^do ask in Open Source Section

[Help~Is~Here]

I am using BSNL's modem one a rental basis, and the day before yesterday, the modem's power adapter gave up on me! It refused to turn on the modem.

Now, what's the first thing you would think? Yes, take the thing and run to your telephone exchange to get it replaced because it's their modem and you still have warranty because you are still paying for it. That is what I also thought but sadly, that's where things took a turn for the bad.

As soon as the I took the modem and the adapter to the exchange, the officer in-charge plugged the modem with another adapter and voila! It turned on which again confirmed that the adapter I had was faulty. Now, you would think they are going to replace it for you. Atleast that's what I thought! But the officer told me that they don't have any stock and that there were a lot of adapters that were sent to Gujrat to get repaired, and she told me as soon as those adapter come, she'll give me one. And guess how long that is going to take? 3 months!!! The officer in-charge is asking me to wait for 3 months without a broadband connection!! Hell, I can't stay 3 hours without it!! It ticked me off, and I asked her if me buying another adapter would void the modem warranty to which she replied she wouldn't recommend me to do that, but if I'm willing, I can go get one.

Now, you would think, ok, hell with the replacement, I'll just go get a new adapter for 150~200 bucks. Again, atleast that's what I thought and voila, I was wrong again!! I searched my entire town in all the electrictronics shops for a replacement adapter, and hell, they ain't got one of the similar type!! I even went to the nearest city and no one has it!!

Now, you would think that not getting one is impossible!! but trust me, the adapter that the modem needs is not the one you would normally find in electronics shops. The adapter the modem uses is a 9V AC 1000mA. First of all, you don't get an AC to AC adapter normally in electronic shops. You can find a million varieties of AC to DC adapters. And on top of that, this adapter need 1000mA of power! Even if you found and AC to AC adapter, they aren't anymore powerful than 500mA. You just can't find one!! Even if you found one, it is not easily accessible! Finally I ran out of choice and the only option was to repair the bloody thing!! And thankfully one of the shop keepers directed me to a very remote location, you can't even call that place a town, on going there, there is this one place where a couple of electronic geeks repair anything possible! And thankfully once again, they promised to repair my adapter but they said it would take 3 days!! I begged them and tried to make them understand the importance of the adapter and finally agreed to repair it within a day for 110 bucks!

So, I went again to the remote place today and finally got the adapter back and got online and I'm writing this post!

The moral of the story is: DON"T GET A BSNL MODEM!! Looking back at my posts, I certainly did support the modems they supply because they are considerably good quality but lack of support and BSNL's ignorance has promted me to take an alternative route!! So, when you get a modem/router make sure the accessories are easily available in the market no matter which brand it is! I've even told the guy to make me another adapter just in case this one gives up again! Atleast it's just a matter of 110bucks than 3 days or 3 months without a connection to the outside world!!:D

[janitha]

Any 9V 1000 ma adapter is not such a big deal, whether AC or DC. If AC, it is only a matter of a 9V 1000 ma step down transformer, wires and the pin.

[gary4gar]

I am using BSNL's modem one a rental basis, and the day before yesterday, the modem's power adapter gave up on me! It refused to turn on the modem.

Now, what's the first thing you would think? Yes, take the thing and run to your telephone exchange to get it replaced because it's their modem and you still have warranty because you are still paying for it. That is what I also thought but sadly, that's where things took a turn for the bad.

As soon as the I took the modem and the adapter to the exchange, the officer in-charge plugged the modem with another adapter and voila! It turned on which again confirmed that the adapter I had was faulty. Now, you would think they are going to replace it for you. Atleast that's what I thought! But the officer told me that they don't have any stock and that there were a lot of adapters that were sent to Gujrat to get repaired, and she told me as soon as those adapter come, she'll give me one. And guess how long that is going to take? 3 months!!! The officer in-charge is asking me to wait for 3 months without a broadband connection!! Hell, I can't stay 3 hours without it!! It ticked me off, and I asked her if me buying another adapter would void the modem warranty to which she replied she wouldn't recommend me to do that, but if I'm willing, I can go get one.

Now, you would think, ok, hell with the replacement, I'll just go get a new adapter for 150~200 bucks. Again, atleast that's what I thought and voila, I was wrong again!! I searched my entire town in all the electrictronics shops for a replacement adapter, and hell, they ain't got one of the similar type!! I even went to the nearest city and no one has it!!

Now, you would think that not getting one is impossible!! but trust me, the adapter that the modem needs is not the one you would normally find in electronics shops. The adapter the modem uses is a 9V AC 1000mA. First of all, you don't get an AC to AC adapter normally in electronic shops. You can find a million varieties of AC to DC adapters. And on top of that, this adapter need 1000mA of power! Even if you found and AC to AC adapter, they aren't anymore powerful than 500mA. You just can't find one!! Even if you found one, it is not easily accessible! Finally I ran out of choice and the only option was to repair the bloody thing!! And thankfully one of the shop keepers directed me to a very remote location, you can't even call that place a town, on going there, there is this one place where a couple of electronic geeks repair anything possible! And thankfully once again, they promised to repair my adapter but they said it would take 3 days!! I begged them and tried to make them understand the importance of the adapter and finally agreed to repair it within a day for 110 bucks!

So, I went again to the remote place today and finally got the adapter back and got online and I'm writing this post!

The moral of the story is: DON"T GET A BSNL MODEM!! Looking back at my posts, I certainly did support the modems they supply because they are considerably good quality but lack of support and BSNL's ignorance has promted me to take an alternative route!! So, when you get a modem/router make sure the accessories are easily available in the market no matter which brand it is! I've even told the guy to make me another adapter just in case this one gives up again! Atleast it's just a matter of 110bucks than 3 days or 3 months without a connection to the outside world!!:D
so Planning to Buy a Dlink 502T?? :p

[Help~Is~Here]

Any 9V 1000 ma adapter is not such a big deal, whether AC or DC. If AC, it is only a matter of a 9V 1000 ma step down transformer, wires and the pin.

It's quite easy to say that, and myself being an electronic & electrical hobbyist understand the point that you are trying to make. But just take a step back at walk the path again but this time in the form of a layman who knows nothing about these things. How do you think they are going to react?

The reason I got it fixed in the first place is because I knew it could be fixed and I knew the procedure that involves in fixing it and I knew who could do it at the earliest. Otherwise, why do you think I went in search of that shop? It's just because I didn't have the accessories to fix it myself and knew it could be done elsewhere.

But that's not the case with everyone. The point that I tried to make was that it is not something that is easily accessible unlike primary AC and secondary DC adapters available commercially.:(

[janitha]

It's quite easy to say that, and myself being an electronic & electrical hobbyist understand the point that you are trying to make. But just take a step back at walk the path again but this time in the form of a layman who knows nothing about these things. How do you think they are going to react?

The reason I got it fixed in the first place is because I knew it could be fixed and I knew the procedure that involves in fixing it and I knew who could do it at the earliest. Otherwise, why do you think I went in search of that shop? It's just because I didn't have the accessories to fix it myself and knew it could be done elsewhere.

But that's not the case with everyone. The point that I tried to make was that it is not something that is easily accessible unlike primary AC and secondary DC adapters available commercially.:(

Any local technician anywhere in India will do it for you and it won't take much time or cost.

But regarding the customer care of BSNL, I agree.

[arnab2kool]

I am using BSNL's modem one a rental basis, and the day before yesterday, the modem's power adapter gave up on me! It refused to turn on the modem.

Now, what's the first thing you would think? Yes, take the thing and run to your telephone exchange to get it replaced because it's their modem and you still have warranty because you are still paying for it. That is what I also thought but sadly, that's where things took a turn for the bad.

As soon as the I took the modem and the adapter to the exchange, the officer in-charge plugged the modem with another adapter and voila! It turned on which again confirmed that the adapter I had was faulty. Now, you would think they are going to replace it for you. Atleast that's what I thought! But the officer told me that they don't have any stock and that there were a lot of adapters that were sent to Gujrat to get repaired, and she told me as soon as those adapter come, she'll give me one. And guess how long that is going to take? 3 months!!! The officer in-charge is asking me to wait for 3 months without a broadband connection!! Hell, I can't stay 3 hours without it!! It ticked me off, and I asked her if me buying another adapter would void the modem warranty to which she replied she wouldn't recommend me to do that, but if I'm willing, I can go get one.

Now, you would think, ok, hell with the replacement, I'll just go get a new adapter for 150~200 bucks. Again, atleast that's what I thought and voila, I was wrong again!! I searched my entire town in all the electrictronics shops for a replacement adapter, and hell, they ain't got one of the similar type!! I even went to the nearest city and no one has it!!

Now, you would think that not getting one is impossible!! but trust me, the adapter that the modem needs is not the one you would normally find in electronics shops. The adapter the modem uses is a 9V AC 1000mA. First of all, you don't get an AC to AC adapter normally in electronic shops. You can find a million varieties of AC to DC adapters. And on top of that, this adapter need 1000mA of power! Even if you found and AC to AC adapter, they aren't anymore powerful than 500mA. You just can't find one!! Even if you found one, it is not easily accessible! Finally I ran out of choice and the only option was to repair the bloody thing!! And thankfully one of the shop keepers directed me to a very remote location, you can't even call that place a town, on going there, there is this one place where a couple of electronic geeks repair anything possible! And thankfully once again, they promised to repair my adapter but they said it would take 3 days!! I begged them and tried to make them understand the importance of the adapter and finally agreed to repair it within a day for 110 bucks!

So, I went again to the remote place today and finally got the adapter back and got online and I'm writing this post!

The moral of the story is: DON"T GET A BSNL MODEM!! Looking back at my posts, I certainly did support the modems they supply because they are considerably good quality but lack of support and BSNL's ignorance has promted me to take an alternative route!! So, when you get a modem/router make sure the accessories are easily available in the market no matter which brand it is! I've even told the guy to make me another adapter just in case this one gives up again! Atleast it's just a matter of 110bucks than 3 days or 3 months without a connection to the outside world!!:D

No man you are right. But in my town I got 2 adapters defected due to high voltage and they replaced it twice. For the 2nd adapter replacement they dint had any spare adapter and adviced me to purchase an adapter from market and that wouldn't void my warranty. I purchased an adapter according to the voltage specifications (9v or 12v, I dont remember) and used for 2 months, and after that they gave me another adapter and its working fine. Try to use a voltage stabilizer for using ur pc and modem adapter. Take out a common power output from ur voltage stabilizer and connect ur UPS to it and plugin ur adapter into it, that will save ur adapter for rest of ur life. I am doing so and I havent faced any problems from that time.

Thank you.

Hello,

I want connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.

Hello,

I want to connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.

No man you are right. But in my town I got 2 adapters defected due to high voltage and they replaced it twice. For the 2nd adapter replacement they dint had any spare adapter and adviced me to purchase an adapter from market and that wouldn't void my warranty. I purchased an adapter according to the voltage specifications (9v or 12v, I dont remember) and used for 2 months, and after that they gave me another adapter and its working fine. Try to use a voltage stabilizer for using ur pc and modem adapter. Take out a common power output from ur voltage stabilizer and connect ur UPS to it and plugin ur adapter into it, that will save ur adapter for rest of ur life. I am doing so and I havent faced any problems from that time.

Thank you.

Hello,

I want connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.

Hello,

I want to connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.

OOps posted twice by mistake! Sorry everybody for this. Moderators dont mind. But I need help with the wireless issue.

Thank you.

[Help~Is~Here]

Listen mate, the wireless you are referring to is of 2 types. One is Wi-Fi and the other bluetooth. The modem you have has Wi-Fi while your USB dongle supports bluetooth. Both of them are different technologies and cannot connect with each other. So, you can't try connecting a bluetooth device to another device that only supports Wi-Fi. So, all you need to do is just get a wireless LAN card for you PC and you should be able to connect wirelessly. If you have a laptop, just check the configuration to see it alredy has a wireless LAN card(WLAN).

[gary4gar]

No man you are right. But in my town I got 2 adapters defected due to high voltage and they replaced it twice. For the 2nd adapter replacement they dint had any spare adapter and adviced me to purchase an adapter from market and that wouldn't void my warranty. I purchased an adapter according to the voltage specifications (9v or 12v, I dont remember) and used for 2 months, and after that they gave me another adapter and its working fine. Try to use a voltage stabilizer for using ur pc and modem adapter. Take out a common power output from ur voltage stabilizer and connect ur UPS to it and plugin ur adapter into it, that will save ur adapter for rest of ur life. I am doing so and I havent faced any problems from that time.

Thank you.

Hello,

I want connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.

Hello,

I want to connect my BSNL modem (Quidway WA 1003A) via Bluetooth. I have tried number of times, but dint got it working. I asked the BSNL people that whether I have the wireless facility in my modem or the aerial and wireless indicator are just in the modem to add a bit beauty to it? They answered me "no your modem has this facility and you connect wirelessly with the help of Bluetooth, all you need is a Bluetooth Dongle". Now can anybody tell me how I can make my connection working between the Bluetooth Dongle and the modem, so that I can connect to net without wires also.

Help needed, please.

Thank you.



OOps posted twice by mistake! Sorry everybody for this. Moderators dont mind. But I need help with the wireless issue.

Thank you.
THese bsnl babu's are misleading you
bluethoth & wi-fi are separate protocols and and arent't compatible with each other.

you can use a wi-fi card(PCI) on destop which comes for 1200/-
and on lappy u will have it inbuilt

[Help~Is~Here]

Anyone facing any routing problems with the connection today?

I haven't been able to access several sites after 8pm today(08/07/07). Further diagnostics show that routing is failing on BSNL server nodes for several websites and I.P addresses. :( :mad:

Please let me know if anyone else if facing similar issues today. I've already sent a mail to BSNL's routing admin. No reply though! Maybe it's too much to expect a prompt response from BSNL. :D

[janitha]

Anyone facing any routing problems with the connection today?

I haven't been able to access several sites after 8pm today(08/07/07). Further diagnostics show that routing is failing on BSNL server nodes for several websites and I.P addresses. :( :mad:

Please let me know if anyone else if facing similar issues today. I've already sent a mail to BSNL's routing admin. No reply though! Maybe it's too much to expect a prompt response from BSNL. :D

Yes, here also it was the case. Some sites were not opening while some others were.

[almighty]

hi frnds
yesterday i formated my pc
can ne1 plz tell me how to install driver for my modem
when am trying to install driver which came along with modem from bsnl
i get an error message
i ve xp pro service pack 2
plz guide me

[s18000rpm]

^if you have LAN Cable Modem, then you dont need any Drivers.

you need Drivers for USB/WiFi modem.

[almighty]

no i don have lan
what abt usb? how to install driver for it

[Help~Is~Here]

Dude, it's better you invest in a LAN card, just about 250~350 bucks... no hassles of driver installation/reinstallation. Power problems, speed problems and so on.

I would certainly say it's worth having a LAN card than you going through all the other hassles.

[almighty]

^^^
thanx for suggestion
but recently wat sud i do to connect with usb?
my 6020 is also not connecting with pc otherwise i check for driver online for modem :(
plz help me out

[gary4gar]

^^^
thanx for suggestion
but recently wat sud i do to connect with usb?
my 6020 is also not connecting with pc otherwise i check for driver online for modem :(
plz help me out
just pop in the driver CD & run setup.exe & click NEXT,NEXT,NEXT,NEXT,NEXT,NEXT.............

lol just joking:D
please tell what error do u get & if possible post screenshot.
and here at my place LAN card comes just for 180 bucks

[mozodingdong]

i used id and password of one of my friend to connect dataone and surprisingly i got connected. do anyone know wheather BSNL knows that the particular id and password is loged from a particular fone number?? do they have records that so and so user id was used from a particular fone no. ?

[Help~Is~Here]

i used id and password of one of my friend to connect dataone and surprisingly i got connected. do anyone know wheather BSNL knows that the particular id and password is loged from a particular fone number?? do they have records that so and so user id was used from a particular fone no. ?

Unfortunately although they do, it's not public and it's going to get charged on the phone number on which the original id has been registered and not from which you are using it.

[mozodingdong]

if i ask dataone for the usage detail of my broadband will they b able to give the information that from which tele no. the used id was used to login??

[Help~Is~Here]

if i ask dataone for the usage detail of my broadband will they b able to give the information that from which tele no. the used id was used to login??

Nope they wont! and if you ask BSNL for the usage details, they will ask you to use the dataone website to check the details where you wouldn't find any telephone no. If you think someone else is using your login details, then change your password immediately, however, if your usage is showing higher in your bill than what it shows on the dataone website, then someone else's id is clipped wrongly to your no. You need to give a complaint where they will investigate and see if any other id is being wrongly billed on your no.

[Manshahia]

i m getting download speed more than 50 KBps these days..
can anyone help me telling whom i sud contact in BSNL abt this problem?
i m on Home 500

[gary4gar]

i used id and password of one of my friend to connect dataone and surprisingly i got connected. do anyone know wheather BSNL knows that the particular id and password is loged from a particular fone number?? do they have records that so and so user id was used from a particular fone no. ?
enojy as much as you can but the party will be soon over and you won't be able to use other people id's from your phone line

[Help~Is~Here]

i m getting download speed more than 50 KBps these days..
can anyone help me telling whom i sud contact in BSNL abt this problem?
i m on Home 500

You say you are getting above 50KBps, then what is the problem?

[Manshahia]

but for the past 5 months i hav been getting a speed of 150-170 KBps on torrents which came down to 50 KBps and 60-70 KBps on rapidshare which came down to 1-2 KBps... I cant download anything from rapidshare...

[Help~Is~Here]

but for the past 5 months i hav been getting a speed of 150-170 KBps on torrents which came down to 50 KBps and 60-70 KBps on rapidshare which came down to 1-2 KBps... I cant download anything from rapidshare...

First of all, lot on to your modem interface and then make sure your downlink speed is 2048Kbps. If not, then there might be noise on the line which is resulting in lower synchronisation and hence lower throughput. So, get your line checked in that case. However, if it is still the same, do the next step.

Next, run the speedtest from BSNL's website and see what speeds they tell you. Here's the link: www.dataone.in (http://www.dataone.in) Go there and click on speed test.

If you see similar speeds, first of all, run a complete anti-virus and a spyware scan and make sure everything is clean. Then make sure no other programs using the internet are running, except for essential system utilities. And then run the speed test again. If it's still the same, I'm afraid nothing much you can do about it. Try getting in touch with your local telephone exchange. I'm sure they won't be of help at all. But miracles happen!!

[Manshahia]

called the BSNL customer care...
they hav logged the complaint and said its a server problem...
he said that the problem wud b resolved in 24 hours...
lets c wat happens...

One more thing

THe downlink is 2048 KBps...
the uplink is 480 KBps.. i think it sud b 512 KBps....

SNR Margin : 27.0 8.0 db
Line Attenuation : 33.0 21.0 db

[praka123]

for past 3 days daytime am getting low speeds @ 10kB/sec then i called the JE of Muvattupuzha exchange and now the speed is somewhat OK.he is saying that the available bandwidth is shared btwn available ports.

[mozodingdong]

called the BSNL customer care...
they hav logged the complaint and said its a server problem...
he said that the problem wud b resolved in 24 hours...
lets c wat happens...

One more thing

THe downlink is 2048 KBps...
the uplink is 480 KBps.. i think it sud b 512 KBps....

SNR Margin : 27.0 8.0 db
Line Attenuation : 33.0 21.0 db

2048 KBps ?? (KBps is Kilo Byte per second and kbps is kilobit per second) bsnl offers 2 mbps that is 2048 kilo bits/256 kilo bytes.. i think u quoted it earonously..

[Help~Is~Here]

2048 KBps ?? (KBps is Kilo Byte per second and kbps is kilobit per second) bsnl offers 2 mbps that is 2048 kilo bits/256 kilo bytes.. i think u quoted it earonously..

That was a typo and anyone would understand that. Don't look at things literally. Look at what it implies.

called the BSNL customer care...
they hav logged the complaint and said its a server problem...
he said that the problem wud b resolved in 24 hours...
lets c wat happens...

One more thing

THe downlink is 2048 KBps...
the uplink is 480 KBps.. i think it sud b 512 KBps....

SNR Margin : 27.0 8.0 db
Line Attenuation : 33.0 21.0 db

Are you using a Home500? because uplink is supposed to be 256Kbps unless it's a business package

[mozodingdong]

ok, got it ..:)

[mozodingdong]

how u people getting such speed?

this is what my dataone speed ..... :(

[Manshahia]

yeah i m on Home 500...

[praka123]

BSNL, Calcutta Telephones Free Broadband Speed Checker.


Testing is done with 128 KB of Sample Data. Formula To calculate your Bandwidth=(128*8 Kbits/(endtime - starttime) sec

Your current bandwidth reading is:

1.60 Mbps

which means you can download at 204.35 KB/sec. from www.calcuttatelephones.com (http://www.calcuttatelephones.com) server located at Territa Bazar, Kolkata.
^^this is my speed upto 8-9 PM.while morning and night speeds are around 217-230 KB/Sec.am on home 500.after monsoon started on June here(Kerala) speeds are like this.I must say that earlier am getting a good speed of 217KB/sec irrespective of time.

[mozodingdong]

hoo haa mine is 1.86 great ....................http://www.calcuttatelephones.com/bandwidthmeter/meter.php

[Help~Is~Here]

how u people getting such speed?

this is what my dataone speed ..... :(

Dude, that's because you did the test on the karachi server. And no offense to Pakistan, but that server sucks!! Even my tests show that, the server in karachi is underperforming, so don't expect great speeds on that. Try a test server in New York.

[shri]

can cross-cat lan cable be used for the modem WA3002-g1 instead of the one supplied along with the modem?

[Help~Is~Here]

can cross-cat lan cable be used for the modem WA3002-g1 instead of the one supplied along with the modem?

I'm not sure about the particular modem you have but if it has been manufactured in the last 3-4 years then it will. All new routers lan cards have something called 'Auto-sensing', which means, it can figure out by itself whether you are using a crossover or a straight through cable and adjust to work accordingly.

[mohit]

Can somebody please tell me how can I use Dataone on Win 98 ? Its really urgent.

[Help~Is~Here]

Can somebody please tell me how can I use Dataone on Win 98 ? Its really urgent.

Are you facing a problem or you just need genral guidance, do you have a LAN card?

[mohit]

Are you facing a problem or you just need genral guidance, do you have a LAN card?

I need guidance on how to set up the connection on Win 98. I don't think that PC has a LAN card.

I do have the USB + LAN ports on my modem.

[Help~Is~Here]

I need guidance on how to set up the connection on Win 98. I don't think that PC has a LAN card.

I do have the USB + LAN ports on my modem.

So, I guess you should have a USB on the computer as well, in that case, do you have the installation CD with you? If you do, just put the CD in and go through the default installation options and once it's installed, plug in your modem onto the computer. Then make sure the USB, power and link light on the modem are 'ON'. Please do this and let us know.

[mohit]

So, I guess you should have a USB on the computer as well, in that case, do you have the installation CD with you? If you do, just put the CD in and go through the default installation options and once it's installed, plug in your modem onto the computer. Then make sure the USB, power and link light on the modem are 'ON'. Please do this and let us know.

Ok. But how do you make a PPP connection in Win 98 ? Will the CD guide me to do it ?

[arnab2kool]

Can somebody please tell me how can I use Dataone on Win 98 ? Its really urgent.

You have to install the PPPOE driver or dialer in 98 to make the dataone work. Just run the setup and it installs and you will be using it in no time. If you dont have the software then PM me with your email id and I will mail you the the dialer or PPPOE driver that is needed to make Dataone work in 98.

Thank you.

[mohit]

^^I have the CD provided with the modem. I hope that contains the dialer as well. Right ??

[janitha]

^^I have the CD provided with the modem. I hope that contains the dialer as well. Right ??
I was also having Win 98 only when I subscribed Dataone about 2 years back and it was like hell. As suggested by the BSNL engineer, I purchased an OEM pack of Win XP Home for about Rs.3.5K. Not only installation and usage of Dataone became easier, all other problems associated with win 98 disappeared. Since then, far I have been wondering why I din't upgrade to XP for years. Of course prior to XP I had used only pirated SWfor about 9 years.

[gary4gar]

^^I have the CD provided with the modem. I hope that contains the dialer as well. Right ??
download it from here
http://rajasthan.bsnl.co.in/main/PPPOE098.EXE

[direfulsky]

I have siemens c2110 modem provided by bsnl.its all pre configred
in its configration page i found its connection authentication user name is diffrent then my username and password..it do have my username and password field there..
bsnl guys told me your user name and password is nothing to do with connection authentication..it do only work for u to monitor ur usage details.
is any one here out there have that modem?

[gary4gar]

I have siemens c2110 modem provided by bsnl.its all pre configred
in its configration page i found its connection authentication user name is diffrent then my username and password..it do have my username and password field there..
bsnl guys told me your user name and password is nothing to do with connection authentication..it do only work for u to monitor ur usage details.
is any one here out there have that modem?
try "admin" as a user name & password

[Manshahia]

else u can also reset the modem using a pin.. there sud b a hole at the backside of the modem..
try using it...

[joey_182]

hey guys ..i have a query...
From last two days my download speed is worse below 20KBps...my region is chandigarh...i havent made any changes in pc or in adsl router...wheres the problem??

[Manshahia]

same problem here joey..
call the customer care...
1800-424-1600.. assuming that u r on BSNL's Dataone...
I m having same problem from last 10-15 days and they are saying that problem is in the server and on some phone numbers...
they say that they are working over it and will rectify it as early as possible...
earlier i wasnt even able to connect..

[joey_182]

^^thnx for reply buddy..
ok i'll call them...

[Manshahia]

Wat is the use of ADSL splitter..?
If i dont use it, will that make any difference in speed i m getting??

[shidhin4ever]

i got the unlimited 900 plan two days back.now i have access to only a few sites like google,digit forum..most of the sites cannot be accessed..(server not found message).there is no problem with torrent downloads which i use.
theres sumthing wrong.
..and yeah..these sites which i cant access in broadband are available in my dialup connection..
plz help..

[Areeb Khan]

I am using a Siemens C2110 wireless modem and using it on Windows Vista Business.Two days ago I changed my password on the dataone site and after that I have been unable to use the broadband.I gathered from the net that I have to change the password in my modem also.Please tell me how to do it?There isn't any option of username or password.It just used to connect the moment I switched on my modem and turned on the wirless network on my laptop.

I tried accessing the dataone site from my dial-up connection to change my password to the previous one but it redirects me to the bsnl home page.
Please tell me what to do?

[praka123]

first,always try configuring from windows/ur OS side.router's pppoe dialer is good,but it can be vulnerable,that someone can telnet into ur pc with default router passwd(admin/admin for most) in the same ip range for eg:dataone users.use XP/Vista's pppoe dialer.simple.reset router/modem and try.best of LUck.

[Areeb Khan]

first,always try configuring from windows/ur OS side.router's pppoe dialer is good,but it can be vulnerable,that someone can telnet into ur pc with default router passwd(admin/admin for most) in the same ip range for eg:dataone users.use XP/Vista's pppoe dialer.simple.reset router/modem and try.best of LUck.

How to do all this?
I even read on net from http://chennai.bsnl.co.in/BBS/ChangePass2.htm
on how to change the password of the modem.I did as told but it didn't help.

So please help.

[anniyan]

Hi guys sorry i am a new data one user :) , could u give some pointers to find s/w to calculate net usage and i want to know dataone is compatible with windows 98 because it works only in XP in my PC :(

[janitha]

Hi guys sorry i am a new data one user :) , could u give some pointers to find s/w to calculate net usage and i want to know dataone is compatible with windows 98 because it works only in XP in my PC :(

It works with 98SE but the configuration is difficult.

[anniyan]

thankd for your response :), any pointers on how to configure dataone in windows 98 se ?

[anniyan]

thanks guys. I configured Dataone successfully in Windows 98 too :) (just installed network adapter driver)

[hermit]

hi i am data 1 user from hyderabad.

i am unable to connect to www.rapidshare.com. i get message page cannot b displayed ,

i think bsnl have blocked this site

plz respond

hermit

[Charan]

^^ Its working for me . Try www.rapidshare.de

[hermit]

i want .com sir as i have to download stuff

.de is working fine

thanks for conformation

[arnab2kool]

hi i am data 1 user from hyderabad.

i am unable to connect to www.rapidshare.com. i get message page cannot b displayed ,

i think bsnl have blocked this site

plz respond

hermit

Hello,

No you are wrong. I connect to rapidshare almost everyday. Check again.

Thank you.

[praka123]

How to do all this?
I even read on net from http://chennai.bsnl.co.in/BBS/ChangePass2.htm
on how to change the password of the modem.I did as told but it didn't help.

So please help.
username for router may be admin.-change the passwd for that user in router.else dont care above steps.but instead,configure pppoe connection from Windows XP or Vist/Linux pppoe client,in windows u haf to go to network connections to make a new connection.

[purifier]

I'm from Hyderabad too... rapidshare.com isn't working for me... Does anybody know the reason please? :(

If rapidshare.com isn't working try ipconfig /flushdns in the command promt once... Now its working fine!

[Areeb Khan]

username for router may be admin.-change the passwd for that user in router.else dont care above steps.but instead,configure pppoe connection from Windows XP or Vist/Linux pppoe client,in windows u haf to go to network connections to make a new connection.

Thanks!!!!! It worked.

[yash227]

which user name or password use for this portal : http://10.240.43.216/

ples tell me.....


Yash

[s18000rpm]

^you have to use the "User Name" & Password provided by BSNL.

[arnab2kool]

I have firefox 1.5 and I have downloaded the datafox plugin. How to install it? I cant find a way. Can anybody help me?

Thank you.

[go4saket]

Hey, can anyone tell me what is the upload speed of BSNL Home 3300 (2 Mbps) plan...

[Help~Is~Here]

^^ 256Kbps is the upload bandwidth which translates to roughly 20~30KBytes/sec in realtime

[go4saket]

r u sure of this... do u have 3300 plan or u came 2 know from somewhere...

[Help~Is~Here]

r u sure of this... do u have 3300 plan or u came 2 know from somewhere...

Dude, regardless of whether it's a home 250, 500 or 3300, all these plans run on the same bandwidth. Upto 256Kbps for upload and Upto 2Mbps for download.

If you are looking for more upload, then I would suggest you try going with a local ISP where you can get upto 512Kbps upload.

[go4saket]

Sorry my friend, but you are wrong here. Plan 250 & 500 have a bandwidth of 256 Kbps to 2 Mbps whereas Plan 3300 is a dedicated 2 Mbps line. Upload is 8KBPS for 250 & 500 plan. I want to know th upload speed for 3300 plan...

[Help~Is~Here]

Are you confused, you first say that the upload is 256Kbps and then you say it's 8KBPS? Where did you get that info from? Even if you convert it, it doesn't add up..

With regards to the upload, I was wrong in the difference of plans. However, although the Home3300 shows a dedicated 2Mbps line you should understand that you are never going to get an upload of 2Mbps for the simple fact that the technology is ADSL and upload and download won't be same. I expect to see an upload of anywhere between 512Kbps to 1Mbps. Not more than that!!

[gigyaster]

I am currently a netone user, now I am willing to go for a broadband. I am from Shillong so I have to take BSNL's one, since no other ISP are here.
I find it very much difficult to understand the procedure and detailed information about the HOMEPLAN250. So, I am asking you people to help me out.

All I need is the cheapest broadband (from BSNL). Please mention all the hidden cost, and whose modem will be best. ALL INFO ABOUT HOME 250 PLAN Plzz in details. No copy paste from BSNL's website please.
Thank You.

[praka123]

^go with Home500 plan.dont look behind. ;) once ur addicted to BB,H250 is simply not enough :D honest saying

[Help~Is~Here]

With regards to the upload, I was wrong in the difference of plans.


I have to correct myself again. Seems like BSNL have increased the upload bandwidth!! I checked my router now and it's giving me 864Kbps upload on a Home 500 package and not the expected 256Kbps.

Can everyone else check their router and see if they have similar/more upstream rates?

[praka123]

^what's ur adsl- settings set:is it T1.413 or G.lite or..i mean i am using a huewai router mt 880 2yrs old.hope to know which settings others are using?

[Help~Is~Here]

^what's ur adsl- settings set:is it T1.413 or G.lite or..i mean i am using a huewai router mt 880 2yrs old.hope to know which settings others are using?

I have tried changing those settings before but that didn't really make any difference. However, are you getting similar speeds on your modem? I have the same Huewai 880.

[go4saket]

Are you confused, you first say that the upload is 256Kbps and then you say it's 8KBPS? Where did you get that info from? Even if you convert it, it doesn't add up..

With regards to the upload, I was wrong in the difference of plans. However, although the Home3300 shows a dedicated 2Mbps line you should understand that you are never going to get an upload of 2Mbps for the simple fact that the technology is ADSL and upload and download won't be same. I expect to see an upload of anywhere between 512Kbps to 1Mbps. Not more than that!!

When I said 256 Kbps, I meant download speed. Upload speed is just 8 KBps or say 64 Kbps. I do understand that upload speed can never be equal to download speed and so upload speed cant be 2 Mbps in plan 3300. Thats what I am asking here, what is the upload speed in plan 3300. BTW, to check your upload speed, go to http://www.speakeasy.net/speedtest/

[Help~Is~Here]

When I said 256 Kbps, I meant download speed. Upload speed is just 8 KBps or say 64 Kbps. I do understand that upload speed can never be equal to download speed and so upload speed cant be 2 Mbps in plan 3300. Thats what I am asking here, what is the upload speed in plan 3300. BTW, to check your upload speed, go to http://www.speakeasy.net/speedtest/

Dude, upload for home250 and 500 was not 64Kbps, it was 256Kbs and now it has increased. As of now, as mentioned earlier I am getting an upload of 864Kbps on home 500. You can see anywhere between 512Kbps~1Mbps upload on the Home3300.

[praka123]

I have tried changing those settings before but that didn't really make any difference. However, are you getting similar speeds on your modem? I have the same Huewai 880. I feel i get more speed when switched to below configuration;though response time seems high.but here,in this forum,many users of 880/882 router/modem suggest G.dmt :-|
http://vinuthomas.com/Forums/viewtopic/p=77306.html
http://en.wikipedia.org/wiki/ITU_G.992.1
http://iup.in/img/praka123/Screenshot-2.jpg
anyways u have to change from default ADSL2+ to any of the other settings as with dataone.
My torrent speeds suck.I got max torrent d/ling these days at 208KB/s while before monsoon it was 217-225KB/s.My u/l speeds are hanging around 70KB/s(580kbps).though i dont check if it goes above that speed-as i set a cron job to be run btwn 2-8AM to switch on and off the torrent clients and the connection in my Debian Linux.
My DSL speed is 217kB/s(1.8mbps) now.and before June got 230 KB/s stable. :(

[Help~Is~Here]

I feel i get more speed when switched to below configuration;though response time seems high.but here,in this forum,many users of 880/882 router/modem suggest G.lite :-|
My DSL speed is 217kB/s(1.8mbps) now.and before June got 230 KB/s stable. :(

Thanks praka, however, I am well aware of these settings and I can assure you that the best stability to speed works on the normal G.dmt that is supported by BSNL. Changing the setting to one which conflicts with the server settings at your ISP may result in instability/packet loss/higher responce times/varying speeds.

So, it is always advised to keep them at your default ISP setting which is G.dmt. Besides, regardless of what setting you change it to, if you come to the main page of your modem, you can see that it has picked up the line default which is G.dmt.

[praka123]

I have researched a little just now :p sorry i earlier told G.lite what i meant was G.Dmt!

Found that the settings under adsl-settings shud be ideally modulation= G.Dmt,FDM=mode,Bitswap=doesnt matter :) Hope it helps someone.:)
Check SNR in summary page for teh highest value=better settings.
And a good speed test is airtel walle:
http://203.145.184.14/meter.php

[Help~Is~Here]

I have researched a little just now :p sorry i earlier told G.lite what i meant was G.Dmt!

Found that the settings under adsl-settings shud be ideally modulation= G.Dmt,FDM=mode,Bitswap=doesnt matter :) Hope it helps someone.:)
Check SNR in summary page for teh highest value=better settings.


Honestly praka, the SNR has nothing to do with the setting on your modem. Before I start, you should know that I am a support engineer working for a UK ISP, so you can take my word for it. Refer to my previous posts on the same thread.

Now, regarding the SNR margin, firstly it stands for 'Signal to Noise Ratio'. This is a parameter which helps in identifying how strong your signal is. As SNR is defined, it's the ratio of signal that is reaching your modem with regards to the Noise on the line and this is totally controlled by the ISP itself.

If you have high levels of static Noise on the line, you would need a higher SNR margin set on your line but at the same time, higher the SNR, the lesser the bandwidth will end up being. There is an ideal range in which the SNR works, somewhere between 12~45dB. If the SNR seems to go to abnormally high values, then you would end up getting less that 2Mbps at the same time it can't be too low as the synch will end up getting dropped every minute due to the noise on the line.

So, there is a very small bracket in which the ISP handles this. For example: In the UK, if a customer is complaining about very frequent disconnections, then after the basic checks show no problem, we go ahead and raise the SNR margin making sure that it doesn't affect the customer's synchronisation speeds.

So, honesly, SNR might keep varying +/-5 every time your modem makes a connection depending on the noise on the line. And certainly that has nothing to do with the settings on your modem.

Hope you get my point.;)

[praka123]

/*offtopic/*
oh!ur a support engineer :D btwn i am a lo$er ECE(8 more papers 2 clr) ;) :(
97-2001 batch!
on topic:
but ppl keeps experimenting!I knew that SNR stands for signal-to-noise ratio and if the value seems greater then i think shud settle for that option?as stand from the customer premise equipment.and what i think above values gave a wee-bit better performace may be :-| and am not arguing with you :)

What do the figures mean?

Let's look at some typical figures, and here I will use the ones shown by my own equipment a D-link DSL-504 Router using 512K 50:1 ADSL.

These are as follows:

* Attenuation Downstream: 28dB. This means I am receiving just under 1/500th of the signal sent from the exchange.

* Attenuation Upstream: 31dB. This means the Exchange is receiving just less than 1/1000th of the signal sent from my modem.

* SNR: 19dB. SNR stands for Signal to Noise Ratio and is basically the difference between the level of the signal being received compared with the natural noise level on the line.

Here, the higher the figure the better. In my case 19dB means that the signal I am receiving is almost 100 times stronger than the noise level.

Noise on your line is caused by many things. Some examples are other wires in the cable running alongside your wires, interference from power cables, radio signals, higher than normal resistance joints in the telephone wires and damp in the wires or cables. see below link:
http://usertools.plus.net/tutorials/id/12

[Help~Is~Here]

/*offtopic/*
oh!ur a support engineer :D btwn i am a lo$er ECE(8 more papers 2 clr) ;) :(
97-2001 batch!
on topic:
but ppl keeps experimenting!I knew that SNR stands for signal-to-noise ratio and if the value seems greater then i think shud settle for that option?as stand from the customer premise equipment.and what i think above values gave a wee-bit better performace may be :-| and am not arguing with you :)

see below link:
http://usertools.plus.net/tutorials/id/12

I never said you were wrong.. the link you gave does add up to what I said which is that the settings have really nothing to do with SNR. It keeps varying. It could be decieving as you might see a better SNR when you change a setting but that is only because SNR keeps varying. And every time you change a modulation setting on your modem, it has to resynchronise with te exchange leading to a different SNR value. Hence you see a different SNR when you change the modulation setting and very decievingly enough we unfortunately come to the conclusion that the setting is which changed the SNR.

One more thing that I should say is that, the ADSL we all use is capable of doing above 12Mbps. It has only been limited to 2Mbps and the SNR plays a very big role in it. If you need higher speeds the SNR has to reduced quite considerably comparing a 1or 2Mbps line. For example: on an 8Mbps line, the SNR should ideally be aroun 9~12dB. Like I mentioned before, higher SNR doesn't always mean good. If the SNR is increased too much by the ISP, you might see a slower connection but ofcourse a more stable one!!:D

[go4saket]

Dude, upload for home250 and 500 was not 64Kbps, it was 256Kbs and now it has increased. As of now, as mentioned earlier I am getting an upload of 864Kbps on home 500. You can see anywhere between 512Kbps~1Mbps upload on the Home3300.

256 has never been the upload speed in plan 250, forget about getting 864Kbps. Anyways, theres no point in fighting about it.

[varsharani]

Hello..

I m a Dataone user under "Plan Home-250, 256Kbps"... 1GB is the limit...
I exceed my surfing last month (july) upto 1.325GB.. But the 3 moths before this, i haven crossed even 800.. I just wanted to know,if i ll be needing to
pay the extra charge,or will they take the last 2 months into consideration? any carry forwards of the last 2 months???? i was told so, by friend that they have mentioned like that,in the registration form.

[go4saket]

Sorry friend, but you will have to pay extra for the extra usage. There is no carry forward system of bandwidth.

[janitha]

No carry forward.

[Help~Is~Here]

256 has never been the upload speed in plan 250, forget about getting 864Kbps. Anyways, theres no point in fighting about it.

Dude, it's not about fighting, it's plain simple fact that the base upload speeds was 256kbps for Home250 whether you like it or not and now they have increased the upload bandwidth to 864Kbps! This is plain simple fact! You might be asking how do I know? Because I was using Home250 till 2 months back and now on Home500.

For the sake of not arguing anymore, please provide sources or any piece of relevant info showing that it was not 256Kbps for upload and not 864 now.

http://www.speedtest.net/result/163731768.png

lol.. look at my download speeds.. something conked up on this test!!

[praka123]

@helpishere: use airtel test -it is correct without disturbances.
http://203.145.184.14/meter.php
other way includes d/ling from some fast servers like d/ling from microsoft.com -for me it fetched 230KB/sec.(d/l speed!)

[Help~Is~Here]

@helpishere: use airtel test -it is correct without disturbances.
http://203.145.184.14/meter.php
other way includes d/ling from some fast servers like d/ling from microsoft.com -for me it fetched 230KB/sec.(d/l speed!)

Both BSNL and Airtel test show around 1.5~1.8Mbps but tried on speedtest.net and kbps.co.uk, the international transfer rates seem to be suffering anywhere between 0.4~1Mbps.

Praka, could you please do an 'autorun speedtes' on www.kbps.co.uk (http://www.kbps.co.uk) and see what speeds you are getting?

[praka123]

getting low speeds @ above site.while when i was in Bangalore i got good results with that java based site :?
results:
ile size transferred : 3.02 MB (3167484 bytes)
Total time taken : 19.82 seconds (19821 milliseconds)
Throughput : 159.0 KB/sec [Kilobyte-per-second]
= 0.16 MB/sec [Megabyte-per-second]
= 1272.0 Kbps [Kilobit-per-second]
= 1.27 Mbps [Megabit-per-second]
-----------
File size transferred : 1.04 MB (1090681 bytes)
Total time taken : 20.26 seconds (20263 milliseconds)
Throughput : 53.0 KB/sec [Kilobyte-per-second]
= 0.05 MB/sec [Megabyte-per-second]
= 424.0 Kbps [Kilobit-per-second]
= 0.42 Mbps [Megabit-per-second]

while http://www.speakeasy.net/speedtest/ of us gave me d/l speed of 1828Kbps and u/l speed of 424 kbps :)
but in reality,my download speed in debian apt can be around 217KB/Sec while downloading and with torrents upload is approx 70KB/Sec.so this test if in kerala means unreliable?

[Charan]

@helpishere: use airtel test -it is correct without disturbances.
http://203.145.184.14/meter.php
other way includes d/ling from some fast servers like d/ling from microsoft.com -for me it fetched 230KB/sec.(d/l speed!)

http://img403.imageshack.us/img403/6830/airtelhl5.jpg
:D


Last Result:
Download Speed: 1800 kbps (225 KB/sec transfer rate)
Upload Speed: 168 kbps (21 KB/sec transfer rate)

from Speakeasy :(

[Vivek788]

hey my speed is very slow....most of dierct lnks run at 30-60kbps range.
The main problems are torrents which run from anyting between 0-20 kbps for majoity of the download time(seeds more than 2000),after 7 am torrent speeds shoot up to 60-100 kbps sometimes for some files while sometimes by 6 oclock the connection is lost.

Also i lose capability to use http(browse) after a few minutes.So i need to restart modem to get it back(though downloads and gtalk continues to have connection for few more minutes).Yahoo loses connection before any other site...what is going on with my connection?Is it a network problem,wiring disorder or modem complaint????

I use plan 500 frm the time bsnl started giving broadband service(same modem).....please help!!

[ravi_9793]

hey my speed is very slow....most of dierct lnks run at 30-60kbps range.
The main problems are torrents which run from anyting between 0-20 kbps for majoity of the download time(seeds more than 2000),after 7 am torrent speeds shoot up to 60-100 kbps sometimes for some files while sometimes by 6 oclock the connection is lost.
torrent download speed depend on many things like..how many seeds,peers you are getting.For good torrent download speed..you may give try to this....
http://www.techiehome.org/viewtopic.php?t=518

And few seeting:
http://img111.imageshack.us/img111/8821/44764397kg9.jpg

and set download limit to unlimited.

http://img299.imageshack.us/img299/3114/b1uv0.jpg




Also i lose capability to use http(browse) after a few minutes.So i need to restart modem to get it back(though downloads and gtalk continues to have connection for few more minutes).Yahoo loses connection before any other site...what is going on with my connection?Is it a network problem,wiring disorder or modem complaint????
are you using USB cable to connect your modem woth your computer???

[go4saket]

Dude, it's not about fighting, it's plain simple fact that the base upload speeds was 256kbps for Home250 whether you like it or not and now they have increased the upload bandwidth to 864Kbps! This is plain simple fact! You might be asking how do I know? Because I was using Home250 till 2 months back and now on Home500.

For the sake of not arguing anymore, please provide sources or any piece of relevant info showing that it was not 256Kbps for upload and not 864 now.

http://www.speedtest.net/result/163731768.png

lol.. look at my download speeds.. something conked up on this test!!

See what I got...

http://www.speedtest.net/result/164008897.png
New York Server

http://www.speedtest.net/result/164010773.png
Bangkok Server

http://www.speedtest.net/result/164011586.png
Japan Server

Well, it seems like BSNL Bangalore hasn't capped their bandwidth. Lucky you guys...

[praka123]

@charangk:Lucky U :D :( for me 1.8 mbps capped

[Harvik780]

If u have a low bandwidth then these are the two main causes of it-
1)The underground cable has a little fault
2)Or there are two many users online(check at night 1:00am to see if bandwidth has increased)

[ravi_9793]

If u have a low bandwidth then these are the two main causes of it-
1)The underground cable has a little fault

underground cable has nothing to do with speed.If there is any problem in underground wire..than either your internet will not work or you will face problem of frequent disconnection.

[praka123]

<UPDATE>
Firefox/Iceweasel now works fine with dataone administration account.

http://10.240.64.195/ is the address.Nice,Now i can spare Opera-static!.Complete switch to Epiphany and Firefox.(btwn a Linux user-so no ie-never for me!)

[Help~Is~Here]

See what I got...

http://www.speedtest.net/result/164008897.png
New York Server

http://www.speedtest.net/result/164010773.png
Bangkok Server

http://www.speedtest.net/result/164011586.png
Japan Server

Well, it seems like BSNL Bangalore hasn't capped their bandwidth. Lucky you guys...



First of all BSNL doesn't cap anyone's bandwidth. It depends on a million other factors, just go back on the same thread and refer the post I have put up explaining the reason for different bandwidths.

Secondly, I did the test from kerala and not bangalore:grin:

underground cable has nothing to do with speed.If there is any problem in underground wire..than either your internet will not work or you will face problem of frequent disconnection.

I have to disagree with you here. Although you are right about the frequent disconnection part, you are wrong about the part that the underground cable isn't going to cause a problem.

Any problem with anything in between your modem and the server you are accessing will lead to speed problems whether it is your underground cable or server problems. Don't forget the part about SNR margins.;)

[NIGHTMARE]

hey guys can u tell me there is any difference between Type-I modem and Type-II modem in speed

[Help~Is~Here]

hey guys can u tell me there is any difference between Type-I modem and Type-II modem in speed

Speeds never really depend on the modem unless you are using incompatible technologies. So, there is no difference in speed between the modem that BSNL offers. It's just there for the additional option on the modem/router like more ethernet ports or Wi-Fi

[NIGHTMARE]

thanks

[ravi_9793]

I have to disagree with you here. Although you are right about the frequent disconnection part, you are wrong about the part that the underground cable isn't going to cause a problem.

Any problem with anything in between your modem and the server you are accessing will lead to speed problems whether it is your underground cable or server problems. Don't forget the part about SNR margins.;)

Sorry friend..I also dont agree with you.High SNR(signal to noise ratio)...is required to maintain steady speed. Below are factors for low SNR
1) Longer line.....

2)Speed of your internet connection.High speed connection ..lower SNR than on low speed connection on same line.

3)Hot weather and Wet weather on a connection somewhere could cause dampness and deteriorate the signal. This can be other reason for low SNR.

But when it comes to underground...these factors are negeligible.And if there is any cut in wire..than internet will not work totally.

[dreams]

Guys, Me in chennai and usin the Unlimited plan..I am gettin a speed of 30 KB/sec normally..

I want to know how much u guys r gettin frm the unlimited plan..in chennai.

TIA

[Help~Is~Here]

Sorry friend..I also dont agree with you.High SNR(signal to noise ratio)...is required to maintain steady speed. Below are factors for low SNR
1) Longer line.....

2)Speed of your internet connection.High speed connection ..lower SNR than on low speed connection on same line.

3)Hot weather and Wet weather on a connection somewhere could cause dampness and deteriorate the signal. This can be other reason for low SNR.

But when it comes to underground...these factors are negeligible.And if there is any cut in wire..than internet will not work totally.

Forget it, no point arguing wid u.

[azaad_shri75]

at last I got my bsnl internet connection:D active from today.

[ravi_9793]

Forget it, no point arguing wid u.
as U wish..............

[Akshay]

I m facing a strange prb. n m totally confused..

I recently took a BSNL Broadband Conn. under Home 500 plan. My modem wil b taking andr 4-5 days to arrive. So rite now I m using my frnds modem - DLINK 502T ADSL.

I got my username n passwrd from BSNL. So after connecting my frnds modem to my laptop, I didnt hav to do nething n Internet started immediately. No username or passwrd was required. My frnd n me hav diff. phone nos, userid n passwrd. Everytime I hav to just connect d modem to my laptop n net starts immediately.

My service record (with my userid n passwrd) at "http://10.240.43.216/webLogin.jsp" shows no usage but a service request of "Home 500 Plan - upto 2mbps".

So my query is -

1. How do I confirm if my frnds plan hasnt changed? (earlier he was on UL900) (I think I accidently mite hav changed his plan or smthng)
2. Whose account is getting charged?


PS: I dont want to change modem settings (192.168.1.1) but jst want my queries 2 b answered.

[Peter Parker]

Stop spamming!
(http://clearblogs.com/selfimprovementguide/)

[gary4gar]

I m facing a strange prb. n m totally confused..

I recently took a BSNL Broadband Conn. under Home 500 plan. My modem wil b taking andr 4-5 days to arrive. So rite now I m using my frnds modem - DLINK 502T ADSL.

I got my username n passwrd from BSNL. So after connecting my frnds modem to my laptop, I didnt hav to do nething n Internet started immediately. No username or passwrd was required. My frnd n me hav diff. phone nos, userid n passwrd. Everytime I hav to just connect d modem to my laptop n net starts immediately.

My service record (with my userid n passwrd) at "http://10.240.43.216/webLogin.jsp" shows no usage but a service request of "Home 500 Plan - upto 2mbps".

So my query is -

1. How do I confirm if my frnds plan hasnt changed? (earlier he was on UL900) (I think I accidently mite hav changed his plan or smthng)
2. Whose account is getting charged?


PS: I dont want to change modem settings (192.168.1.1) but jst want my queries 2 b answered.
its yours friends's account you are using, he will be charged for it:D


for plan change there no way you can change your plan from portal itself, for that you have to submit a application to BSNL. You can try to download some from internet say a 5mb file 7 see whether it is counted as free download or a paid one.

if he is on 900UL then it will be counted as free otherwise it will be counted as paid d/l

PS:do the above thing in non-happy hrs only

[Vivek788]

@ravi_9793

My utorrent has been set according to portforwarding instructions,so it is set as u have shown...and though not all ,some of the torrents are new with quite a number of seeds and peers.

Its the http prob thats really a pain in the neck...i use LAN,should I switch to USB...?

[ravi_9793]

@ravi_9793

My utorrent has been set according to portforwarding instructions,so it is set as u have shown...and though not all ,some of the torrents are new with quite a number of seeds and peers.

Its the http prob thats really a pain in the neck...i use LAN,should I switch to USB...?
No..that is not a http problem. And dont shift to USB.There is no speed issue betwwen USB and LAN..but USB faces frequent disconnection problem.

BTW..have you measued your downloading speed at some sites??

[gary4gar]

@ravi_9793

My utorrent has been set according to portforwarding instructions,so it is set as u have shown...and though not all ,some of the torrents are new with quite a number of seeds and peers.

Its the http prob thats really a pain in the neck...i use LAN,should I switch to USB...?
are using DNS provided my BSnl??
then it must be the culprit
use OpenDns they are much faster, google for it

[Vivek788]

oh..i never thought of such a situation...thanks..will try openDNS

[amianirban]

Whenever I login to BSNL site http://10.240.43.216 to check my account usage, I get a message "Sorry. Operation timed out. For safety, please log in again". The url of this timeout page is http://10.240.43.216/myportal/myportaltimeout.jsp. I remember earlier I could enter successfully. Do any of you face/had faced similar problem? What's the remedy?

[janitha]

At times it takes several attempts to login, and each time there is a different error message. (server not responding, line is busy etc. etc.) Anybody facing a similar situation?

[praka123]

Firefox/Iceweasel now works fine with dataone administration account.
http://10.240.64.195/ is the address and everytime it logs in fine.

[brainstar]

hi ppl,
i am a bsnl(bangalore) dataone customer iam having home-500 plan which has foll. features. The maximum free bandwidth usage is 2.5GB and has an night unlimited option i.e., i can download for free from 2:00 am t0 8:00am. But in my bsnl account viewing site iam not able to differentiate between free usage and normal usage so please help me in this regard i'll be thankful for whoever solves dis problem........... http://vinuthomas.com/images/smiles/icon_rolleyes.gif

[gary4gar]

hi ppl,
i am a bsnl(bangalore) dataone customer iam having home-500 plan which has foll. features. The maximum free bandwidth usage is 2.5GB and has an night unlimited option i.e., i can download for free from 2:00 am t0 8:00am. But in my bsnl account viewing site iam not able to differentiate between free usage and normal usage so please help me in this regard i'll be thankful for whoever solves dis problem........... http://vinuthomas.com/images/smiles/icon_rolleyes.gif
use this tool
http://shaplus.com/exes/misc/DataOne-Bandwidth%202.7.zip
Dataone website provides only total monthly bandwidth consumed and does not provide free and chargeable bandwidth separately. The session logs can run into multiple pages and it is difficult to add all the session logs to find the total chargable monthly bandwidth usage.

The following tool will calculate the Total chargeable monthly Bandwidth consumed.

[yrana2002]

hello, guys..
i recently got a new datone connection H500 plan, which i had earlier as well, but somehow i've been having a strange problem..
My modem keeps on disconnecting every minute. I just cant understand why, almost every minute it disconnects, then connects for a few minutes, and then same again.
With this, i cant surf and download properly..Kindly help me on this issue

[s18000rpm]

^try changing the modulation mode.
open the Modem Settings page ( http://192.168.1.1/ ), the User Name & p/w = admin.

follow the instruction as in pic.

http://img178.imageshack.us/img178/6306/bsnleq5.th.jpg (http://img178.imageshack.us/my.php?image=bsnleq5.jpg)
[Note: this pic shows Huawei SmartAX MT880 Modem.]

[yrana2002]

Well, i've done that.. we'll have to see how well it works, but what is the logic behind that thing?

[startrex88]

well the subject speaks for itself i use a home 500 plan

[skghosh44]

DUF (Dataone Usage Finder)
http://duf.sourceforge.net/
Is this software safe to install in pc to see the Data One usage.

[direfulsky]

IS data one is down there?I am from lucknow and around 1 pm i got disconnected...till now its no connectivity. my adsl link is ok.. but there is no activity on data link led.did checked the modem configration page and found not connected..
do update me please..
thanks

[ravi_9793]

IS data one is down there?I am from lucknow and around 1 pm i got disconnected...till now its no connectivity. my adsl link is ok.. but there is no activity on data link led.did checked the modem configration page and found not connected..
do update me please..
thanks
are you using USB or LAN for connectivity??

[direfulsky]

i am using lan connectivity and my lan link is up and running

[ravi_9793]

i am using lan connectivity and my lan link is up and running
start-->>run-->>type cmd and press enter
Command prompt will open.
type
ping 192.168.1.1


and post the result.

[direfulsky]

here is the ping result
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On

Configure Connection Type


Select the protocol and encapsulation type with the ATM PVC that your ISP has instructed you to use.
Protocol: PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
RFC1483(Routed)
Bridging
Encapsulation Type: LLC/SNAP

[Help~Is~Here]

here is the ping result
Microsoft Windows XP [Version 5.1.2600]

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On


Seems like the modem has lost the settings but you can confirm that by doing a ping to www.google.com (http://www.google.com) and see if it times out. Could you please mention the model of the modem so that we can troubleshoot further.

[direfulsky]

Siemens C2110...

[Help~Is~Here]

Siemens C2110...

did you try ping www.google.com (http://www.google.com) ? What is the reply? timing out or are you getting replies?

If the answer is timing out, then please do a "tracert www.google.com (http://www.google.com)" instead of ping without the commas and paste it here.

[ravi_9793]

here is the ping result
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On

Configure Connection Type


Select the protocol and encapsulation type with the ATM PVC that your ISP has instructed you to use.
Protocol: PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
RFC1483(Routed)
Bridging
Encapsulation Type: LLC/SNAP
open IE
enter address 192.168.1.1
You will be aksed user name and password...
user name-->> admin
password-->> admin

There click on WAN.
see..wht is the status in WAN page.

[direfulsky]

my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>

[ravi_9793]

my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>
just give me a print page of WAN

[Help~Is~Here]

my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

C:\Documents and Settings\amresh>

Go into the WAN configuration and just try recreating the account by putting in your broadband username and password. Rest of the settings seems to be fine. If it still doesn't work, you will need to contact your BSNL office to report the problem

[gary4gar]

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
y


use 35 instead of 38 For VCI

[Help~Is~Here]

^^ Yes, you are right, didn't notice that. I'm still working with 0,38 in the UK, so overlooked that.. sorry..

But like I mentioned before, seems like the entire modem has been reset unless you are not telling us that you pressed the reset button:D So, you'll need to reconfigure it.

[brainstar]

hi dis is brainstar
this problem is common if ur using dareglobal DB108 modem even i've seen a few cases like these ur link will be proper and also u'll get authentication failure in ur router ..........
complaint to bsnl about it in ur nearest exchange and ask them for change in modem..........:p

hi ppl iam a bsnl bangalore customer iam having really huge problems with my account usage. As we all know bsnl won't provide bandwidth usage seperately for night unlimited and normal usage separately. I downloaded shareplu bandwidthmeter 2.7 and also dataone usage finder but the problem is dat i can't see my account details in any one of dat cos it shows account login failed even though i've tried for several times with correct username and password also i've used datafox-mozilla extension for the same problem. The problem have not been solved even though i try with different urls.......plz give me a proper solution for this problem........
i regularly see my account usage in http://10.0.0.16:8080

[utsav]

hey i don't hav bsnl landline.so what will be d initial cost of getting the landline and home 500 plan with a type 1 modem.type 1 modem is for Rs 1200 . and how much i have to pay for getting d connection and landline.

i don't want to use bsnl landline .do i hav 2 pay its monthly rental also

[src2206]

Hi

I use the Black Huawei modem. I do not need the wireless connectivity to be enabled. So how can I exactly disable the wireless connectivity option?

Thanks.

[direfulsky]

thanks lot guys. i really appreciate your help..yes i did got freddle around with things.. the clues all u provided me..now at last i did delted all my connections there.. and created a new one...and now my connection is up and running..
thanks again..
have a nice day
happy independence day!

[brainstar]

hi ppl,
bsnl bangalore has really gone mad, yesterday i got the bill for dataone it says i need to pay Rs.7006. I got my brroad band connection on March'07 aunder 250 plan on the month of may i wrote an application for change of plan from home-250 to home-500. BSNL staff said dat ur plan will change from the month of June'07 as usual they cannot change the plan in between any month. So from the month of June i started using night unlimited traffic even though noticing there was no change of plan in my account, hence i got the confirmation from the bsnl staff via telephone (I doubly confirmed from them that there was a change of plan in bsnl server) and in the month of July'07 i received a bill of Rs.3187 i went to the bsnl regional office to sort it out actually i had not even downloaded not even 2GB(2.5GB is the maximum free usage) and it sorted out in the month of July'07 itself and got a new rectified bill and in yesterdays bill it was mentioned that i need to pay again for the month april, June . Also they have chaeged me twice i.e, for the month of june the amount has repeated twice hence the bill amount has gone upto Rs.7006

Isn't this a real madness.................
please post ur opinions on this

[ravi_9793]

hi ppl,
bsnl bangalore has really gone mad, yesterday i got the bill for dataone it says i need to pay Rs.7006. I got my brroad band connection on March'07 aunder 250 plan on the month of may i wrote an application for change of plan from home-250 to home-500. BSNL staff said dat ur plan will change from the month of June'07 as usual they cannot change the plan in between any month. So from the month of June i started using night unlimited traffic even though noticing there was no change of plan in my account, hence i got the confirmation from the bsnl staff via telephone (I doubly confirmed from them that there was a change of plan in bsnl server) and in the month of July'07 i received a bill of Rs.3187 i went to the bsnl regional office to sort it out actually i had not even downloaded not even 2GB(2.5GB is the maximum free usage) and it sorted out in the month of July'07 itself and got a new rectified bill and in yesterdays bill it was mentioned that i need to pay again for the month april, June . Also they have chaeged me twice i.e, for the month of june the amount has repeated twice hence the bill amount has gone upto Rs.7006

Isn't this a real madness.................
please post ur opinions on this
BSNl workers are little lazy...but sometime they are fast. :D

[utsav]

some one plz solve my query plz on post number 2174

[Help~Is~Here]

hey i don't hav bsnl landline.so what will be d initial cost of getting the landline and home 500 plan with a type 1 modem.type 1 modem is for Rs 1200 . and how much i have to pay for getting d connection and landline.

i don't want to use bsnl landline .do i hav 2 pay its monthly rental also

The only way you can not pay for the landline and use broadband is with the Home900 plan.. where you don't have to pay any rentals.. as for all other connections, you have to pay telephone rentels.. or what you could do is.. take a connection and make your connection only incoming with no outgoin.. you might still be charged a bit for it.. but lesser..

As far as the exact payments are concerned, please refer BSNL's website at www.bsnl.in (http://www.bsnl.in) You can't find more details that what is there.. so refer the website first..

[NIGHTMARE]

hi ppl,
bsnl bangalore has really gone mad, yesterday i got the bill for dataone it says i need to pay Rs.7006. I got my brroad band connection on March'07 aunder 250 plan on the month of may i wrote an application for change of plan from home-250 to home-500. BSNL staff said dat ur plan will change from the month of June'07 as usual they cannot change the plan in between any month. So from the month of June i started using night unlimited traffic even though noticing there was no change of plan in my account, hence i got the confirmation from the bsnl staff via telephone (I doubly confirmed from them that there was a change of plan in bsnl server) and in the month of July'07 i received a bill of Rs.3187 i went to the bsnl regional office to sort it out actually i had not even downloaded not even 2GB(2.5GB is the maximum free usage) and it sorted out in the month of July'07 itself and got a new rectified bill and in yesterdays bill it was mentioned that i need to pay again for the month april, June . Also they have chaeged me twice i.e, for the month of june the amount has repeated twice hence the bill amount has gone upto Rs.7006

Isn't this a real madness.................
please post ur opinions on this

in ur bsnl page it shows ur plan has been changed or not if showing so u can reduces the rate of night free

[iffmainak]

I am subscribed to the dataone home plan 500, and whole of last month we were not in home. Computer was not switched on for even a single minute. And this month we got an internet usage bill of about Rs 5500( 500 rental + 5000 @ .80/mb download extra!!) ...This is BSNL ... really dont know what to say .. I am even not able 2 check all the usage details on net, since servers are as usual down ...

[ravi_9793]

I am subscribed to the dataone home plan 500, and whole of last month we were not in home. Computer was not switched on for even a single minute. And this month we got an internet usage bill of about Rs 5500( 500 rental + 5000 @ .80/mb download extra!!) ...This is BSNL ... really dont know what to say .. I am even not able 2 check all the usage details on net, since servers are as usual down ...
Did you changed you account password???????

[leftalone]

Excuse Me,
I'm in kerala and i'm recently broad-banded...
The person juz gave me the modem and i manged to set it up..

The problem is with the torrents.
I use uTorrent..

I couldn't download a thing and the speed is 0.5 Kbps and the like....
The uTorrent port check displays that the port is not open.
I've tried many ports, but no use...

CAn someone help me out???????

I have the 500 plan and i have amazing speeds.
But, the problem is with the torrents.
The speed is 0.5 kbps and not even one port can be opened...

So, i'm dissapointed as i cannot download torrents...
I USE uTorrent...

Can someone help me wiht port forwarding?????

[praka123]

i am a linux user.I can give the basic things.firstly if urs is a single computer,open a random port say 25784 in firewall whatever u use(comodo,zonelam,winxp default etc).then go to µtorrent options and add this port as incoming tcp/udp listening port.save the settings.and try.
and goto
http://portforward.com
for details.btwn Azureus too is a good client.

[leftalone]

i am a linux user.I can give the basic things.firstly if urs is a single computer,open a random port say 25784 in firewall whatever u use(comodo,zonelam,winxp default etc).then go to µtorrent options and add this port as incoming tcp/udp listening port.save the settings.and try.
and goto
http://portforward.com
for details.btwn Azureus too is a good client.

I've done that...
Still no ports open..

[Choto Cheeta]

I am facing one problem with DATA One off late...

Out side Indian Network sites are running damn slow, this screen shot may explain a bit, tried to ping, google.com and vsnl.com at once... here is the result...

http://img3.freeimagehosting.net/uploads/0583b5441d.jpg

:| :|

any one facing the same ??

[praka123]

^no such problems.may be set ur MTU to 1492 will help?
sid:~# ping google.co.nz
PING google.co.nz (72.14.207.104) 56(84) bytes of data.
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=1 ttl=240 time=325 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=2 ttl=240 time=327 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=3 ttl=240 time=325 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=4 ttl=240 time=327 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=5 ttl=240 time=326 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=6 ttl=240 time=327 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=7 ttl=240 time=326 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=8 ttl=240 time=327 ms
64 bytes from eh-in-f104.google.com (72.14.207.104): icmp_seq=9 ttl=240 time=327 ms

--- google.co.nz ping statistics ---
9 packets transmitted, 9 received, 0% packet loss, time 7996ms
rtt min/avg/max/mdev = 325.416/326.889/327.926/0.926 ms

[Choto Cheeta]

@praka123

1st of all its Bridge mode Connection... so that MTU value of Modem shouldnt come to effect, second of all, i didnt know MTU settings would effect only Non Indian (BSNL/VSNL) Network IPs

please Explain....

[praka123]

^i am no expert in networking.even i use bridge mode.(using pppoe linux dialer from os).the MTU value for ur lan card is what i am saying.it has to do with preventing some packet(internet data are send in packets right :D ) collision etc by reducing MTU from default 1500 to some value which fits.for Linux,it is set at 1492.below is the output of ifconfig(ipconfig /ALL in win).
ppp0 Link encap:Point-to-Point Protocol
inet addr:59.9efs P-t-P:59.94.0.5 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3362 errors:0 dropped:0 overruns:0 frame:0
TX packets:3288 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3046631 (2.9 MiB) TX bytes:411599 (401.9 KiB) may be i will find a link for windows.I have the link.but lost.
remember i am using OS dialer,not the ppp mode of router dialer.
edit link:
http://help.expedient.com/broadband/mtu.shtml

[Daffodil]

From this afternoon dataone downstream and upstream speeds have been abysmally slow in Bangalore.
URL: http://myspeed.visualware.com/speedtest/speedtestjs.html (http://myspeed.visualware.com/speedtest/speedtestjs.html)
When: Wed Aug 15 22:11:37 IST 2007
Download: 36,192 bps
Upload: 19,144 bps
QOS: 3%
RTT: 2 ms
MaxPause: 4267 ms
Test #: NA
That is 36Kbps/19Kbps as against 2048Kbps/512Kbps.
This is now happening too frequently. Very poor service by dataone. With such low upload speeds one cannot enter and execute any online activity like booking railway tickets or online banking transactions and now dataone is talking of IPTV. May God save those taking IPTV service!

[ravi_9793]

I am not facing any ROT after pinging google.com
I am a Airtel subscriber

[paid]

Net connection on UT-300R2U frequently gets disconnected every 4-5 minutes changed modem & external Line but no success. switched modes to G.DMT but all in vain. Modem is connected with splitter but it makes no difference if I remove telephone. I am posting ADSL Log File

Other Details:

SNR Margin 21.5db 20.5db dB
Line Attenuation 41.5db 25.0db dB
Loss of Signal 0 0
CRC Errors 0 0
Data Rate 2047 Kbps 251 Kbps kbps
Latency Fast Fast

Please help

[ravi_9793]

Net connection on UT-300R2U frequently gets disconnected every 4-5 minutes changed modem & external Line but no success. switched modes to G.DMT but all in vain. Modem is connected with splitter but it makes no difference if I remove telephone. I am posting ADSL Log File

Other Details:

SNR Margin 21.5db 20.5db dB
Line Attenuation 41.5db 25.0db dB
Loss of Signal 0 0
CRC Errors 0 0
Data Rate 2047 Kbps 251 Kbps kbps
Latency Fast Fast

Please help
First Q-->> wht connection do you use LAN or USB???
Q2-->> Does you link light also drop when your net is disconnected???

[REY619]

Net connection on UT-300R2U frequently gets disconnected every 4-5 minutes changed modem & external Line but no success. switched modes to G.DMT but all in vain. Modem is connected with splitter but it makes no difference if I remove telephone. I am posting ADSL Log File

Other Details:

SNR Margin 21.5db 20.5db dB
Line Attenuation 41.5db 25.0db dB
Loss of Signal 0 0
CRC Errors 0 0
Data Rate 2047 Kbps 251 Kbps kbps
Latency Fast Fast

Please help

I have same modem... No such problem for me... Btw i am using USB mode...

[paid]

First Q-->> wht connection do you use LAN or USB???
Q2-->> Does you link light also drop when your net is disconnected???

Ans-1 Yes I use LAN
Ans-2 Yes the green ADSL LED on modem drops and then blinks

Could it be due to wrong +ive and -ive wires switched wrongly in modem from Telephone line?

I am also attaching a ping report

[REY619]

^^There is definitely some problem in your telephone line...

[ravi_9793]

Ans-1 Yes I use LAN
Ans-2 Yes the green ADSL LED on modem drops and then blinks

Could it be due to wrong +ive and -ive wires switched wrongly in modem from Telephone line?

I am also attaching a ping report
this is probelm from BSNl side.you cant do anything in this.Just make sure..you have not done any modification in the wiring.And your spliter is working fine.

Just try surfing the net directly......remove spliter, and phone.Connect your modem directly to the BSNL line.

[src2206]

Do you have any parallel line connected with the phone through which the BSNL BB works? In that case you may get troubles like this.

[REY619]

Hey People... I have UT-300R2U modem, i have connected it to the UPS so that connection doesnt get lost in case of power failure, but it doesnt happen.
When light goes modem remains connected but the green ADSL LED on modem drops and starts blinking again hence connect