Digit Technology Discussion Forum - View Single Post - Overclocking E7200 and OCZ Ram on IP35-e

darklord · 20-07-2008, 11:51 AM

If you want to get better clocks out of your memory, loosen the timings to say 5-5-5-15 and keep VDIMM at around 2.0V and then see how much it clocks.
You might need to bump up the VMCH a bit too as memory clocking can stress the northbridge.
As for the CPU, dont go beyond 1.4V if you are on Stock cooling.You can drop multiplier and limit CPU overclock if you are pushing your RAM with 1:1 ratio.
You could also try using higher Memory dividers so that you dont need to bump up the FSB too much to get decent clocks out of the RAM.

Hope that helps.

20-07-2008, 11:51 AM	#3 (permalink)
darklord Wise Old Owl Join Date: Oct 2003 Location: Pune,India Posts: 1,445	Re: Overclocking E7200 and OCZ Ram on IP35-e If you want to get better clocks out of your memory, loosen the timings to say 5-5-5-15 and keep VDIMM at around 2.0V and then see how much it clocks. You might need to bump up the VMCH a bit too as memory clocking can stress the northbridge. As for the CPU, dont go beyond 1.4V if you are on Stock cooling.You can drop multiplier and limit CPU overclock if you are pushing your RAM with 1:1 ratio. You could also try using higher Memory dividers so that you dont need to bump up the FSB too much to get decent clocks out of the RAM. Hope that helps.