View Single Post
Old 14-04-2005, 01:45 PM   #8 (permalink)
quad master
In The Zone
 
Join Date: May 2004
Location: Mumbai
Posts: 463
Default

When you OCed it to 295.7 Mhz on the A8N Sli
can you let me know a few exact figures.

- What are the exact ram timings all 4
- Was the command rate at 2T or 1T
- What sort of memory BW did you get in Sandra
- did you run memtest86 to check ram stability if yes for how long.

-------------------------
- Can you give the exact codename of the Hynix DDR400 PC3200 256MB Ram
and what can it be for 512MB module , or can u give me a site link where
i can find all hynix ram modules info in detail with there codenames.
- Do all Hynix Rams use the D43 Chip or only specific.
- How to identify if the Hynix Ram has D43 Chips.


ASUS A8N Sli actually has a problem with 1:1 overclocking over 250Mhz
with Dual Channel DDR Rams at 1T Command Rate it has to be changed
to 2T to go above 250Mhz 1:1.
This ASUS problem has not yet been solved even in the latest 1007 Bios.

Lastly where did you get Mushkin DDR Ram from and how much for it.

Are OCZ DDR400 PC3200 Plat Rev 2 Rams available here , because
they overclock like hell.

Please dont feel like i am asking too many questions
but i like to get my doubts cleared.
__________________
Overclock Me.
Overvolt Me.
AMD Me.
quad master is offline