Digit Technology Discussion Forum - View Single Post - HOW TO

saqib_khan · 07-01-2008, 03:53 PM

U said
"Speeding Up Your PPPoE Connection
If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network."

I have this problem in my PC, in the third step u said to manually set the IP address, but what would be my IP address and subnet mask???

And how to set it??? Explain please!!!

07-01-2008, 03:53 PM	#9 (permalink)
saqib_khan I M A STAR Join Date: Nov 2007 Location: Planet Earth Posts: 855	Re: HOW TO - Boot up Windows XP 60 times faster! U said "Speeding Up Your PPPoE Connection If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section. 1. Select Start/Connect to/Show All Connections. 2. Open the TCP/IP properties for your LAN network interface card. 3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network." I have this problem in my PC, in the third step u said to manually set the IP address, but what would be my IP address and subnet mask??? And how to set it??? Explain please!!!