Digit Technology Discussion Forum - View Single Post

Rollercoaster · 20-06-2006, 02:12 AM

well which rail did u connect the LEDs to
i am assuming 5v

an LED's running voltage is 3v so connect two LEDs in series to the 5v rail

or 4 LEDs to the 12v rail...
it will give a better result. if the LEDs are becoming hot then it means they are over voltaged... so u need to add proper resisters according to the LED and its color.

Alse the Rs 2 LEDs u got are the simple ones.. get the extra bright ones.. they will be costlier at around 10rs each. also big 10mm leds are also available..

20-06-2006, 02:12 AM	#7 (permalink)
Rollercoaster -The BlacKCoaT Operative- Join Date: Mar 2005 Location: Dehradun, India Posts: 1,205	Re: Please rate my PC Case Modification.. well which rail did u connect the LEDs to i am assuming 5v an LED's running voltage is 3v so connect two LEDs in series to the 5v rail or 4 LEDs to the 12v rail... it will give a better result. if the LEDs are becoming hot then it means they are over voltaged... so u need to add proper resisters according to the LED and its color. Alse the Rs 2 LEDs u got are the simple ones.. get the extra bright ones.. they will be costlier at around 10rs each. also big 10mm leds are also available.. __________________ -------------------------------------------- Holding my last breath, safe inside myself..... -------------------------------------------- I dont use my computer. I misuse it- रोलरकोस्टर