Quote:
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
|
Quote:
my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
|
Your motherboard supports auto jack sensing, and this complicates things a lot wrt connections. To get basic stereo out from front try this -
Connect
1) to Pin3
3) to Pin1
6) to Pin2
Leave the rest open and see if front line-out works. The rest is trial and error.
-Keith
__________________
[ THIS SPACE HAS BEEN RESERVED FOR FUTURE USE IN CASE I WANT TO BOAST ABOUT MY PC'S, HOUSE, CAR, GIRLFRIENDS OR OTHER STUFF THAT I KNOW YOU DON'T REALLY CARE ABOUT ]
|