Digit Technology Discussion Forum - View Single Post

GigaHeartz · 31-08-2009, 03:28 PM

Thanks hell storm. By all manipulation of settings and sata connector position, i can detect both devices as following(shows up in the bios). I have even changed the device types to tell the BIOS that the TSST device is a cdrom and the seagate device is a HDD.

Setting-1
Primary IDE Master: (TSSTcorp CDDVDW SH-S233B)
Primary IDE Slave: (ST3320613AS)

Setting-2
SATA-1: (TSSTcorp CDDVDW SH-S233B)
SATA-2: (ST3320613AS)

Setting-3
Primary IDE Master: (ST3320613AS)
Primary IDE Slave: (TSSTcorp CDDVDW SH-S233B)

Setting-4
SATA-1: (ST3320613AS)
SATA-2: (TSSTcorp CDDVDW SH-S233B)

Which one among the above is correct?..

Also there are two options to enable ACPI APIC support and AHCI 2.0 support. Should i enable or disable them?..

All computer gurus please come forward. Pls advice me on this..

31-08-2009, 03:28 PM	#3 (permalink)
GigaHeartz Off the beaten track Join Date: Apr 2009 Location: Bglr-Hyd Posts: 43	Re: Cannot boot from Samsung DVD drive Thanks hell storm. By all manipulation of settings and sata connector position, i can detect both devices as following(shows up in the bios). I have even changed the device types to tell the BIOS that the TSST device is a cdrom and the seagate device is a HDD. Setting-1 Primary IDE Master: (TSSTcorp CDDVDW SH-S233B) Primary IDE Slave: (ST3320613AS) Setting-2 SATA-1: (TSSTcorp CDDVDW SH-S233B) SATA-2: (ST3320613AS) Setting-3 Primary IDE Master: (ST3320613AS) Primary IDE Slave: (TSSTcorp CDDVDW SH-S233B) Setting-4 SATA-1: (ST3320613AS) SATA-2: (TSSTcorp CDDVDW SH-S233B) Which one among the above is correct?.. Also there are two options to enable ACPI APIC support and AHCI 2.0 support. Should i enable or disable them?.. All computer gurus please come forward. Pls advice me on this..